Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 47

Thread: ep45-ds3 e8400 @4.2ghz




  1. #21
    Join Date
    Aug 2008
    Posts
    28

    Default Re: ep45-ds3 e8400 @4.2ghz

    how low 9? id like to have it running at 2.44b multi

  2. #22
    Join Date
    Aug 2008
    Posts
    28

    Default Re: ep45-ds3 e8400 @4.2ghz

    all other timings are on auto by the way

  3. #23
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: ep45-ds3 e8400 @4.2ghz

    Well I could better answer you if you posted your full settings each time in the template it is just easier to read that way, just cause you seem to jump around so I am never sure

    Have you tried 7 or 8 for Static tRead? Auto is not the way to go, but I already told you that.......

  4. #24
    Join Date
    Aug 2008
    Posts
    28

    Default Re: ep45-ds3 e8400 @4.2ghz

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: auto
    CPU Clock Ratio ..........................: 8
    Fine CPU Clock Ratio.....................:.+5
    CPU Frequency ...........................: 495


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 495Mhz
    PCI Express Frequency (Mhz) .........:100mhz


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800mv
    PCI Express Clock Drive.................: 900mv
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)...................: 0ps


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............:2.00b
    Memory Frequency (Mhz) ..............: 990
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD ......................................... 5
    tRP'...........................................5
    tRAS..........................................15

    Advanced Timing Control
    tRRD...........................................aut o 4
    tWTR..........................................auto 4
    tWR............................................aut o 8
    tRFC...........................................aut o 68
    tRTP...........................................aut o 4
    Command Rate (CMD) ....................:2

    Channel A
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.43750
    CPU Termination…..... 1.200V*.......: auto 1.5
    CPU PLL…………………....1.500V*.......: 1.5900
    CPU Referen.…………....0.755V*.......: auto 0.76
    CPU Reference2………,,0.800V*.......:<<< Leave

    MCH/ICH
    MCH Core…………….....1.100V...........: auto 1.4
    MCH Reference….…….0.800V...........; auto 0.72
    MCH/DRAM Ref.…......0.900V...........: auto 0.9
    ICH I/O……………….....1.550V............: auto 1.5
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 2.1v
    DRAM Termination .…0.900V............: auto 0.9
    Channel A Reference 0.900V............: auto 0.9
    Channel B Reference 0.900V............: auto 0.9

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [enabled]

    they are the stable settings that i got working

  5. #25
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: ep45-ds3 e8400 @4.2ghz

    K, thanks! That is much easier for me to read.

    You can manually set these to improve performance >>>

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: auto
    CPU Clock Ratio ..........................: 8
    Fine CPU Clock Ratio.....................:.+5
    CPU Frequency ...........................: 495


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 495Mhz
    PCI Express Frequency (Mhz) .........:100mhz


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800mv
    PCI Express Clock Drive.................: 900mv
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)...................: 0ps


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [333] << May need 333, but also try 400
    System Memory Multiplier ..............:2.00b
    Memory Frequency (Mhz) ..............: 990
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD ......................................... 5
    tRP'...........................................5
    tRAS..........................................15 <<< Try 12

    Advanced Timing Control
    tRRD...........................................aut o 4 << Try 3-4
    tWTR..........................................auto 4 << Try 3-6 and 9-11
    tWR............................................aut o 8 << Try 3-6
    tRFC...........................................aut o 68 << Try 48-50, 52-62 may be needed
    tRTP...........................................aut o 4 << Try 3-6
    Command Rate (CMD) ....................:2

    Channel A
    Static tRead Value.........................:9 << Try 7-9
    tRD Phase0 Adjustment...................:auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:9 << Try 7-9
    tRD Phase0 Adjustment...................:auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.43750
    CPU Termination…..... 1.200V*.......: auto 1.5
    CPU PLL…………………....1.500V*.......: 1.5900
    CPU Referen.…………....0.755V*.......: auto 0.76
    CPU Reference2………,,0.800V*.......:<<< Leave

    MCH/ICH
    MCH Core…………….....1.100V...........: auto 1.4 << may need manually set 1.3-1.4
    MCH Reference….…….0.800V...........; auto 0.72
    MCH/DRAM Ref.…......0.900V...........: auto 0.9
    ICH I/O……………….....1.550V............: auto 1.5
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 2.1v
    DRAM Termination .…0.900V............: auto 0.9
    Channel A Reference 0.900V............: auto 0.9
    Channel B Reference 0.900V............: auto 0.9

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [enabled]

  6. #26
    Join Date
    Aug 2008
    Posts
    28

    Default Re: ep45-ds3 e8400 @4.2ghz

    ok ill give those ago do you have any advice on setting to run the ram multi at 2.44 for 1180? i think its 1180

  7. #27
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: ep45-ds3 e8400 @4.2ghz

    I thought about that. Not sure if those rams will do that though.

    If you want to try I would start with everything in subtimings on AUTO, and start with these, then try to lower one at a time starting at the top >>>>
    Standard Timing Control
    CAS Latency Time........................5 << may need 6
    tRCD ......................................... 5
    tRP'...........................................5
    tRAS..........................................15 <<< May need 18

    See I told you that you jump around a lot. I hope you are making profiles in the BIOS, it would make your life easier. Make 2 or 3, One full stable and another tow for 1180 and above or below

  8. #28
    Join Date
    Aug 2008
    Posts
    28

    Default Re: ep45-ds3 e8400 @4.2ghz

    lol sorry yeah i make profiles

  9. #29
    Join Date
    Aug 2008
    Posts
    28

    Default Re: ep45-ds3 e8400 @4.2ghz

    couldnt get it to boot at 1190 but i got it stable at 5 5 5 12
    trrd 3
    twtr 3
    twr 4
    trfc 48
    trtp 3

    i couldnt get static read any lower than 9

  10. #30
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: ep45-ds3 e8400 @4.2ghz

    No problem man, Just was hoping you did as it saves much time. I have about 6 in my BIOS right now.

    And I also dont mind helping with all this either, I just said that about profiles hoping you did so you was not jumping around so much

Page 3 of 5 FirstFirst 12345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •