Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 47

Thread: ep45-ds3 e8400 @4.2ghz




  1. #31
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: ep45-ds3 e8400 @4.2ghz

    Is that 555-12 at 990? If so you can try a higher trfc with lower Static, or higher trrd with higher static.... Or a mix of them both.

    I can say for sure it would be better for you to start with most of the subtimings higher and then get Static tRead Value lower then start lowering the others. Static tRead Value has the MOST impact on performance/speeds so you want it lower First before anything else

  2. #32
    Join Date
    Aug 2008
    Posts
    28

    Default Re: ep45-ds3 e8400 @4.2ghz

    yeah your a good helper :P so is that about all i can do to make it faster or is ther any hope i could run 1190

  3. #33
    Join Date
    Aug 2008
    Posts
    28

    Default Re: ep45-ds3 e8400 @4.2ghz

    yes that was 555 12 990 if i uped dram volts would i have a higher chance of running 1190

  4. #34
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: ep45-ds3 e8400 @4.2ghz

    Ya, you likely would. But what spec for voltage you see on the sticker is the warrantied amount. So if you fry it you would have to RMA it and hope it was not burnt internally and lie to them of course about the voltages used.

    Some boards overvolt by default anyway so I doubt they would be able to say much unless you pumped 2.5 or so into them.

    2.2 is the recommended max "Safe Range" for DDR2, when using 2.2 I always suggest a fan for sure.

    using 2.3 and 2.4 is doable for most DDR2 but only for short periods and is not recommended at all for long term use.

    2.2 is generally safe for most 2.1 spec'd ram, but please use a fan on the ram as it will be HOT

  5. #35
    Join Date
    Aug 2008
    Posts
    28

    Default Re: ep45-ds3 e8400 @4.2ghz

    yeah my ram is 2.1v rated so its sweet i got it booting at 4.2ghz at 1130ram at 555 15 and the same sub timings u sent me but it wont pass mem test any thoughts?

  6. #36
    Join Date
    Aug 2008
    Posts
    28

    Default Re: ep45-ds3 e8400 @4.2ghz

    also i have 3 fans on my ram and at the mo running 4ghz at 497x9 ram at 1068 tight timing past 18hours of prime and ram pass memtest fine :D

  7. #37
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: ep45-ds3 e8400 @4.2ghz

    What?

    HAHA you said it wont pass, then next post 2 minutes later said is passes for 18 hours

    You been drinking tonight? HAHA J/K

  8. #38
    Join Date
    Aug 2008
    Posts
    28

    Default Re: ep45-ds3 e8400 @4.2ghz

    lol nah wont past at 4.2 on 1130 lol puff puff

  9. #39
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  10. #40
    Join Date
    Aug 2008
    Posts
    28

    Default Re: ep45-ds3 e8400 @4.2ghz

    im stable at 4ahz at 1068 lol

Page 4 of 5 FirstFirst ... 2345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •