Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: Finding this info in my mobo?




  1. #1
    Join Date
    Sep 2008
    Posts
    20

    Default Finding this info in my mobo?

    FSB:
    Multi:
    Strap or ratio:
    DRAM Clock:
    Vcore:
    PLL:
    FSB Term or VTT:
    NB:
    RAM volt:
    GTL 0/2:
    GTL 1/3:
    Load line calibration:

    With the exception of FSB I'm a bit lost :D

    Got a E8400 @ 3ghz and the mobo below. Wanna do some OC on it.


    Sorry I tried to edit this, as it was messing up the pages. So your board listed was removed. Please add again without the coding
    Last edited by Lsdmeasap; 09-10-2008 at 02:21 PM.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Finding this info in my mobo?

    It is in the BIOS, in the MIT section. Use Delete Key at boot to enter the BIOS

    Some of those are not available in P35 BIOS. Those you will not find are >>>
    PLL:
    FSB Term or VTT:
    GTL 0/2:
    GTL 1/3:

    But you should see all of these settings in the MIT section of the BIOS >>>

    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8] << CPU multi
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00] << Strap/ratio/ram multi
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    Dram Clock settings >>>>

    CAS Latency Time________________ ?
    Dram RAS# to CAS# Delay_________ ?
    Dram RAS# Precharge Delay_______?
    Precharge Delay (tRAS)__________ ?

    ACT to ACT Delay (tRRD)_________ ?
    Rank Write to READ Delay________ ?
    Write to Precharge Delay_________ ?
    Refresh to ACT Delay______________ ?
    Read to Precharge Delay__________ ?
    Static tRead Value_______________ 1-31
    Static tRead Phase Adjust________ 1-31

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] RAM Voltage
    PCI-E OverVoltage Control_ [+0.1V] Southbridge core
    FSB OverVoltage Control___ [+0.1V] this is FSB Core
    (G)MCH OverVoltage Control [+0.1V] << This is Northbridge Core
    Load line calibration________[Auto]
    CPU Voltage Control_______ [1.25] Vcore

    Do you see all of that in the MIT section? If not you may need to update your BIOS or use the Control + F1 hotkey on the MAIN Page of the BIOS. The screen will flash quickly and then go into the MIT Section and all hidden settings will be shown

    Or are you asking something else?


    Please read thru the pinned memory and overclocking/BIOS tweaking Guides I have posted, they will help you get to know your BIOS better

    If you need help please post back your full specs Like 2x1 or 2x2 ram, ram speed, brand and what settings you are trying to use that do not work

  3. #3
    Join Date
    Sep 2008
    Posts
    20

    Default Re: Finding this info in my mobo?

    Im' trying to OC the system, and the guys on another board asked me to post that info :D

    It's a wolfdale E8400 @ 3ghz,
    The ram is clocked @ 800mhz, 2 X 2gb sticks of G.Skill

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Finding this info in my mobo?

    Well what you see above is all you will see in your BIOS.

    Do you need my help or suggestions for overclocking? Or were you just wondering about the settings? If you do want my help, please tell me a CPU Freq you would like to start with and I will give you some suggested settings

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •