Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: EP45-DS3R Temperature




  1. #1
    Join Date
    Sep 2008
    Posts
    17

    Default EP45-DS3R Temperature

    Hey, I just got my 2x2GB G.skill sticks. Was forced to raise the MCH voltage to 1.3 or else I kept getting blue screens in games. Now I'm seeing 50 degrees on this "System" temperature. My question is what is that temperature a measure of? And is it safe?

  2. #2
    Join Date
    Aug 2008
    Location
    La Jolla, CA
    Posts
    175

    Default Re: EP45-DS3R Temperature

    What are you using to measure temps? Are you talking about idle temps? There are 3 primary temperature readings from the motherboard. First, from the cores themselves, then 2 from the board. We were discussing this on another thread...I believe one sensor is near the northbridge and the other near the cpu socket. I'm assuming "system" is the northbridge sensor. My runs at 41C idle - essentially constant. In any case, a constant temp of 50C seems high, but could depend on how you have the whole system overclocked. What are your settings, other than the MCH Core?
    Gigabyte GA-EP45-DS3L (BIOS F9); E7200 Core2Duo 2.53Ghz 1066Mhz FSB 3MB L2 (OC to 3.4Ghz); SuperTalent 2x2G DDR2-800 PC6400 CL 5-5-5-12 (T800UX4GC5); Seagate 500GB SATA2 7200 32mb cache HD; EVGA 8800GT 512MB Superclocked Edition
    Ultra X-connect X2 550-watt PSU; Vista x64 SP1 and OpenSUSE 11.0 (KDE 4.1)

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-DS3R Temperature

    It is the Northbridge Temp. Did you try 1.2 or 1.25?

    Yes, it is safe as long as you are under 65-70. What settings are you using? You may have had things set to tight is why you felt you needed 1.3, but maybe not. So just wondering so I could advise better

    You could add a 40MM fan on the NB heatsink, or at least redo the thermal paste under there if you feel up to it. If you do, use NON conductive paste

    Want to give me what you are using in the MIT, and I will see if I see anything that may have stopped you from using less MCH >>>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............:
    CPU Clock Ratio ..........................:
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................:


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<<
    PCI Express Clock Drive.................: <<<
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............:
    Memory Frequency (Mhz) ..............:
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................

    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2

    Channel A
    Static tRead Value.........................:7-10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:7-10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: <<< Leave
    CPU Referen.…………....0.755V*.......: <<< Leave
    CPU Reference2………,,0.800V*.......:<<< Leave

    MCH/ICH
    MCH Core…………….....1.100V...........: <<
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............:
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •