Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: Gigabyte ep45-DS3R




  1. #11
    Join Date
    Sep 2008
    Location
    Michigan
    Posts
    35

    Default Re: Gigabyte ep45-DS3R

    Hi thank you for replying.
    the model of my ram is the corsair xms2 ram is 2x1 per channel. How do I upgrade the bios safley and what version do I go to?
    inwin GT1 Mid tower
    Gigabyte GA-X99-UD5,
    Intel 5820k Processor. Crucial
    DDR4
    2133, Cooler Max 750 watt
    power supply. Asus/Nvidia GTX 760 2gb

    video card. Samsung 120 gb SSD,

    Western Digital 2TB hard Drive.


  2. #12
    Join Date
    Sep 2008
    Location
    Michigan
    Posts
    35

    Default Re: Gigabyte ep45-DS3R

    Hi thank you for responding
    You are awesome I made the changes you suggested and it booted like lightening.
    although I had to wing a few things its way smoother! Where do I find the sticker for the cas? and where do I find s1-s3 sleep? Now when its comes out of a shut down it tries to restart but can't. it goes into a rapid start cycle and never fires the monitor up. It finally started after I shut the power off. Any final tweeking?

    Thanks
    Last edited by pterem; 09-14-2008 at 06:41 AM.
    inwin GT1 Mid tower
    Gigabyte GA-X99-UD5,
    Intel 5820k Processor. Crucial
    DDR4
    2133, Cooler Max 750 watt
    power supply. Asus/Nvidia GTX 760 2gb

    video card. Samsung 120 gb SSD,

    Western Digital 2TB hard Drive.


  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte ep45-DS3R

    Hey, No Problem! That is why I am here.

    Sorry It took me so long to reply to you!

    2x1 GB eh, So that is it? Just two 1GB sitcks? If so, the below settings would be for 2x1GB

    To update the BIOS Safely, start by NOT USING @BIOS!

    If you do want to, which you dont have to at all, see my pinned guide here >>>
    http://forums.tweaktown.com/f69/bios...h-guide-27576/

    I only mentioned BIOS because I was talking about the S3 Sleep, Which there has not been a updated BIOS fix released yet. But, here is your BIOS page just incase you do want to update it, which I say if it isnt broke dont fix it!
    GIGABYTE - Support - Motherboard - BIOS - GA-EP45-DS3R (rev. 1.0)

    The Sticker you need to look at for CAS timings is on the RAM. It is the timings that look like this >>>
    4-4-412 or 5-5-5-15 Something along those lines. Since you do have 2x1 and not 2x2 as I originally thought, I will update the settings I gave for you to use. Please still look at your ram sticker, as I will enter 4-4-4-12 below and it may not be correct for your ram.

    You can also look in CPU-z, link below, in the SPD Tab for the 400Mhz Section as shown in image >>>



    See in my image, there is 2 400MHz entries, yours may have 2 as well. You will want to use the EPP ones if yours has them. Post a pic of yours if you are not sure, like I said it will be either 4-4-4-12 or 5-5-5-12/15/18

    CPUID

    As for your boot cycles, let me explain. A double reboot is normal when making BIOS changes. A triple or more is not, and will reset the BIOS to default settings because something was not set correct (Wrong timings, or not enough voltage to something)


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 2.40GHz (9 X 266 FSB = 2.394)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 266 Mhz (FSB)
    PCI Express Frequency (Mhz) .........:Set to 100


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [333] <<< If you keep getting triple boot, put this on AUTO

    System Memory Multiplier ..............: 3.00
    Memory Frequency (Mhz) ..............: 798 MHz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................4 << Will depend on your ram, see Sticker for CAS timing, or post me model #. Same applies below

    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................12/15

    The timings below, and the one 12/15 ranger above, are ranges. Set to highest and once you get your CPU stable you can start to bring them down. ONE AT A TIME with testing between each move or you will never get stable because you move too many and you wont know which is causing the errors

    Advanced Timing Control [Press Enter]
    tRRD...........................................3-4
    tWTR..........................................(4-6) 9-11
    tWR............................................3-5 (May need 8-14)
    tRFC...........................................38 (42) << For 2GB
    tRTP...........................................3-6
    Command Rate (CMD) ....................:2

    Channel A
    Static tRead Value.........................:7-10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:7-10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: Auto or Normal << you can leave on Auto for now with no overclocking


    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: <<< Leave
    CPU Referen.…………....0.755V*.......: <<< Leave
    CPU Reference2………,,0.800V*.......:<<< Leave

    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.2V << For stability with 2GB
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 2.1V << See you ram sticker, or post me model #. Also shown in CPU-z SPD Tab as you see above. Set to EPP voltage

    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

  4. #14
    Join Date
    Aug 2008
    Posts
    68

    Default Re: Gigabyte ep45-DS3R

    @shauntx

    your settings will not work.

    your voltage will cause error.. not all quadcores are thesame, dont forget the Vdroop of this board. if you set your voltage to 1.4750 you detected voltage will be @ 1.3760 idle 1.36xx~1.34xx on load. please set the cpu PLL to default. because the PLL votage overclock to much when set to auto.

    dont forget to Run OCCT mix for 2 hours. if occt is stable within 2 hours your settings is good for 24/7 OCCT is more faster to detect errors than orthos.

    @ TS

    please read more information before overclocking.
    Last edited by harry23lim; 09-15-2008 at 12:34 AM.

  5. #15
    Join Date
    Sep 2008
    Location
    Michigan
    Posts
    35

    Default Re: Gigabyte ep45-DS3R

    Hi thanks for replying all
    I keep getting it wrong 4-1 gb sticks. Ok hopfully this is it the stick reads:5-5-5-18 Also what is occt mix?

    Thanks again for putting up with my lack of education.
    Last edited by pterem; 09-15-2008 at 03:33 AM.
    inwin GT1 Mid tower
    Gigabyte GA-X99-UD5,
    Intel 5820k Processor. Crucial
    DDR4
    2133, Cooler Max 750 watt
    power supply. Asus/Nvidia GTX 760 2gb

    video card. Samsung 120 gb SSD,

    Western Digital 2TB hard Drive.


  6. #16
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte ep45-DS3R

    Ok most of the above settings are fine for 4x1, but I still need to know the voltage as I showed you a image of how to check.

    You will want to make these changes to the above though for 4x1 >>
    tRFC...........................................42-48 (52-62)
    MCH Core…………….....1.100V...........: << 1.2V - 1.25V

    OCCT is a Stress Test

  7. #17
    Join Date
    Sep 2008
    Location
    Michigan
    Posts
    35

    Default Re: Gigabyte ep45-DS3R

    Thanks again for response
    I finally figured out all these things are programs I just downloaded cpu-z and found my voltage to be 1.8v however the manufacture says its supposed to be 1.9 for the corsair xms2 ddr2 800, 1024 6400 do will this give you eveything you need? or frequency 270 ,400
    cas 4.0 ,5.0
    ras to cas 4 ,5
    cas precharge 4 ,5
    tras 13 ,18
    trc 15 22
    voltage 1.8 1.8
    also I'm coming home from work and finding this thing starts itself in the middle of the day from a shut down no one home to start it!
    Last edited by pterem; 09-16-2008 at 05:00 AM.
    inwin GT1 Mid tower
    Gigabyte GA-X99-UD5,
    Intel 5820k Processor. Crucial
    DDR4
    2133, Cooler Max 750 watt
    power supply. Asus/Nvidia GTX 760 2gb

    video card. Samsung 120 gb SSD,

    Western Digital 2TB hard Drive.


  8. #18
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte ep45-DS3R

    Please post a Image of CPU-z SPD Tab if you want to me to tell you FOR SURE.

    But yeah if Corsair page where you bought the ram says 1.9V, or your ram sticker says 1.9V then you will be fine with 1.8

    Please post a Image (use Print Screen button and paste to MSPaint if you do not have a screen capture application) as I cannot understand the table you have up there.

    Also, please post the settings you are using that fail for you as of now. If you do not want to write all that out, you can post a few images of the MIT page if you like. You will have to take it with your camera though

  9. #19
    Join Date
    Sep 2008
    Location
    Michigan
    Posts
    35

    Default Re: Gigabyte ep45-DS3R

    Thank you for posting
    I'll capture the cpu-z and post it. Been really busy at work I'l try for tonight.

    Thank you
    inwin GT1 Mid tower
    Gigabyte GA-X99-UD5,
    Intel 5820k Processor. Crucial
    DDR4
    2133, Cooler Max 750 watt
    power supply. Asus/Nvidia GTX 760 2gb

    video card. Samsung 120 gb SSD,

    Western Digital 2TB hard Drive.


  10. #20
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte ep45-DS3R

    Hmm, what happened with the above second post you removed? I see the issue with the first.

    At imageshack, the url you want is the last one, after you click the + sign. The one shown here >>>



    Then put the url into img tags >>>

    [img]Direct URL of image here[/img]

    If you are still unsure of what I mean, quote my post and you should see my coding

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •