Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Gigabyte X48-DQ6 reboot/hang problem 2




  1. #1
    Join Date
    Sep 2008
    Posts
    32

    Angry Gigabyte X48-DQ6 reboot/hang problem 2

    I have the same problem. Sometimes, before the post, when the memory text is in the screen, the computer reboots just once, then all is ok.

    My computer:
    E8400 3.0Ghz
    2x2 Kingston 800 Mhz (Epida chips) 1.8V
    8800 GT Asus Glaciator

    And BIOS options are:

    Robust Graphics Booster___________ [Fast]
    CPU Clock Ratio ____________ [9]
    CPU Host Clock Control_ [Auto]
    CPU Host Frequency (MHz)__________ [333]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]

    DRAM Timing Selectable_______ SPD __ [Auto]]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 6 (Auto)
    Dram RAS# to CAS# Delay_________ 6 (Auto)
    Precharge Delay (tRAS)__________ 18 (Auto)

    ACT to ACT Delay (tRRD)_________ 3 (Auto)
    Rank Write to READ Delay________ 4 (Auto)
    Write to Precharge Delay_________ 6 (Auto)
    Refresh to ACT Delay______________ 52 (Auto)
    Read to Precharge Delay__________ 3 (Auto)
    Static tRead Value_______________ 8 (Auto)
    Static tRead Phase Adjust________ 2 (Auto)

    CPU/PCIEX Clock Driving Control [800mV]
    CPU Clock Skew Control [normal]
    GMCH Clock Skew Control [Normal]

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [Normal]
    PCI-E OverVoltage Control_ [Normal]
    FSB OverVoltage Control___ [Normal]
    (G)MCH OverVoltage Control [+0.025V] Set today after reading this post

    Please, please, Lsdmeasap, could you help me?

    Thanks,
    Last edited by Lsdmeasap; 09-16-2008 at 01:26 PM.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X48-DQ6 reboot/hang problem

    @Alicantino32
    Please make a new thread, or tell me to separate this one, Posting in someone else's thread for help confuses us all. I will post you some answers though, and after you reply I will separate the thread so you will have your now.

    Try this >>>
    Robust Graphics Booster___________ [Fast]
    CPU Clock Ratio ____________ [9]
    CPU Host Clock Control_ [Auto]
    CPU Host Frequency (MHz)__________ [333]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]

    DRAM Timing Selectable_______ SPD __ [Auto]]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 18

    I do not know why Auto is giving you 6 above, it is 555-18 ram right?

    ACT to ACT Delay (tRRD)_________ 3-5
    Rank Write to READ Delay________ 4-6
    Write to Precharge Delay_________ 6-8
    Refresh to ACT Delay______________ 52-62
    Read to Precharge Delay__________ 3-6
    Static tRead Value_______________ 7-12
    Static tRead Phase Adjust________ 2 (Auto) << Please manually set to Zero

    CPU/PCIEX Clock Driving Control [800mV]
    CPU Clock Skew Control [normal]
    GMCH Clock Skew Control [Normal]

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.1V] << Set to 1.9V = +0.1V
    PCI-E OverVoltage Control_ [Normal]
    FSB OverVoltage Control___ [+0.1V] << For stability
    (G)MCH OverVoltage Control [+ 0.150 - +0.250] << Needed for stable 2x2GB ram
    Last edited by Lsdmeasap; 09-16-2008 at 08:21 PM.

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X48-DQ6 reboot/hang problem 2

    Edited, Merged and moved.

    Please post back and let me know how you get along with the above settings

  4. #4
    Join Date
    Sep 2008
    Posts
    32

    Default Re: Gigabyte X48-DQ6 reboot/hang problem 2

    Ok. Sorry. We continue in this post.

    Do you see correct (G)MCM Overvolting = +0.025 ? Do you think I need more?

    IŽll try your settings this night and IŽll tell you how this work.

    It's a random problem then I don't know when I'll be back :)

    Thanks.

    Do you think may be interesting to update the bios to F8a? or F7? Thanks again.
    Last edited by Alicantino32; 09-16-2008 at 07:14 PM.

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X48-DQ6 reboot/hang problem 2

    I would suggest F7

    You will need MCH voltage +0.2 or +0.25, not +0.025 that is not enough. I updated my first post as well

    Let me know how you get along. I will be back later I am on my way out right now. Good luck, the above should help you for sure

  6. #6
    Join Date
    Sep 2008
    Posts
    32

    Default Re: Gigabyte X48-DQ6 reboot/hang problem 2

    Quote Originally Posted by Lsdmeasap View Post
    I would suggest F7

    You will need MCH voltage +0.2 or +0.25, not +0.025 that is not enough. I updated my first post as well

    Let me know how you get along. I will be back later I am on my way out right now. Good luck, the above should help you for sure
    Thanks, thanks, thanks. I'll try and I'll let you know.

  7. #7
    Join Date
    Sep 2008
    Posts
    32

    Default Re: Gigabyte X48-DQ6 reboot/hang problem 2

    I was setting my BIOS when I realised that the value I had writtten was not correct for Static tRead. The correct value is:

    Static tRead Phase Adjust________ 16 (Auto)

    The 2 value was for Command rate.

    I must set Static tRead adjust to zero anyway?

    Thanks,

    P.S. My memory is 1.8 and Everest tell me, in Auto mode, that memory is set to 1.88V, Do you think +.1 is a good idea?

    Thanks again,
    Last edited by Alicantino32; 09-17-2008 at 02:21 AM.

  8. #8
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X48-DQ6 reboot/hang problem 2

    Yes, always use Zero for t Read phase adjust.

    What does CPU-Z say in the SPD tab for EPP profiles voltage? Or what does it say on the sticker of your ram? Or the page where you bought it?

    Well +0.1 is safe for 1.8V sticks, but since you are already getting 1.88 then I would say you are fine if it is indeed 1.8V only ram.

    I say that and asked the above info because there is several places in everest where you could see ram voltage, and it may or may not be your Spec'd voltage, but rather a JEDEC profile.

    If you are not looking at Motherboard, SPD tab in everest please do, and see what it says there towards the bottom for your "Enhanced Performance Profile". This is your Spec voltage. Here is a image if you are not sure what I meant >>>


  9. #9
    Join Date
    Sep 2008
    Posts
    32

    Default Re: Gigabyte X48-DQ6 reboot/hang problem 2

    [Duplicated]

  10. #10
    Join Date
    Sep 2008
    Posts
    32

    Default Re: Gigabyte X48-DQ6 reboot/hang problem 2

    Hi! Nice to read you again! J <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    <o:p></o:p>
    The memory stickers show “1.8V” and Everest shows “1.88V” with [AUTO] option in BIOS. Then, I think I don’t need more voltage. What do you think?
    <o:p></o:p>
    With +0,1V in BIOS, Everest shows 1.91V. I think this could be too much. Your opinion is important for me J <o:p></o:p>
    <o:p></o:p>
    About the rest of settings I am doing them step by step. For the moment, I have increased (G)MCM and this night I will set t Read phase adjust to 0 (and other configurations).

    As you know, this is a random issue, then I prefer doing this changes step by step and checking them.

    For the moment, after having increased (G)MCM, the issue has dissapeared but I can not be sure yet.
    <o:p></o:p>
    Thanks again. <o:p></o:p>
    <o:p></o:p>
    IŽll be back!!! <o:p></o:p>

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •