Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 6 of 6 FirstFirst ... 456
Results 51 to 58 of 58

Thread: team xtreem dark on ep45 DS3R




  1. #51
    Join Date
    Aug 2008
    Posts
    68

    Default Re: team xtreem dark on ep45 DS3R

    yeah its pretty fast.. they also said that if they recieved the board earlier than expected they will call me asap.

    the service technichian there dont have any idea on over clocking i even bring my rams, and procie. and we also test it on a e8400 c2 duo just for them to feel we dont do the overclocking..

    i tried to explain to them that my e4300 core 2 duo is only 1.8ghz 200 mhz cpu frequency and cannot optimize a ddr2 1066 unless you will overclock the processor a bit. 1066 rams needs atleast 266 mhz cpu frequency right? :)

    yeah the shop where i bought it from have an account at TipidPC.com | Buy and Sell Computer Hardware, Parts and Peripherals i tried to send them a message and the message contains a link from this forum. but they didnt reply.

    so i call their costumer service to talk to them and go there directly. and test the board itself.

    yeah i hope it will be fast as they said it will be.. lol.. because i have no computer right now.. this is my dads computer im using.

    thanks LSD.

    ill keep this updated.

  2. #52
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: team xtreem dark on ep45 DS3R

    Yeah you need at least 266 FSB with the 4.00 ram multi to even reach 1066 ram speed.

    Ya, email support often is much slower then speaking with someone on the phone or In person, at least you went in and they seemed to tell you it wont take very long for the RMA. That is good

    Good luck, and ya please post back when you get up and running again

  3. #53
    Join Date
    Aug 2008
    Posts
    68

    Default Re: team xtreem dark on ep45 DS3R

    LSD i have a question

    we are wondering why the power led is blinking instead of being steady while the computer is powered on, while the manual says blinking power led blinks only while on s3 sleep state.

    we have a forum in TipidPC.com | Buy and Sell Computer Hardware, Parts and Peripherals a group of people who own a ep45 gigabyte and we all have thesame issues.. its not a problem though its just the power led but why is it blinking?
    Last edited by harry23lim; 10-02-2008 at 05:55 AM.

  4. #54
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: team xtreem dark on ep45 DS3R

    Does everyone have it hooked up properly? I mean to the correct place on the board, as there is 2 places for Power LED's to be connected. I guess both should work but just wondered which you guys were using. There is pins in the front panel header and a separate System power LED header.

    Everyone sure they have them hooked up properly? And you are not talking any DQ6 boards are you?

    But both have the same actions, Manual says The light should be off when in S3 sleep mode >>>

    The LED is on when the system is operating.
    The LED keeps blinking when the system is in S1 sleep state.
    The LED is off when the system is in S3/S4 sleep state or powered off (S5).
    Is anyone using S1 sleep? If so tell them to switch to S3 or no sleep in the BIOS and be sure everyone using the latest BIOS as it has fixed S3 sleep

    I have seen a few who have DES installed and it blinks every 4 seconds to show DES is installed and working (C1E and EIST enabled). So these users, and yourself, have DES installed and or EIST and C1E enabled? If so disable them and see if it remains on, if so that is it. Uninstall DES and you will be all set
    Last edited by Lsdmeasap; 10-02-2008 at 05:41 PM.

  5. #55
    Join Date
    Aug 2008
    Posts
    68

    Default Re: team xtreem dark on ep45 DS3R

    LSD thanks

    we all used the correct header. because the standalone power led header got 3 pins and its not a good idea to put it there :)

    nope im not talking about DQ6 only ds3r and ep45c ds3r

    we are not using s1,s3,s4 sleep i talking about The LED is on when the system is operating but in our case its blinking

    i will try to off the des, eist, C1e lol i still have no board ill let the others try what you have said haha :P

  6. #56
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: team xtreem dark on ep45 DS3R

    You can use the 3 pin one, the first pin is+ and the second and third is -

    But yeah the front panel header is best to use.

    Ya, I think it is the DES and EIST and C1e since you have it installed

  7. #57
    Join Date
    Aug 2008
    Posts
    68

    Default Re: team xtreem dark on ep45 DS3R

    LSD my board is back at last. the distro and the shop are so stupid they returned the defective board after 12 days and the distibutor said that my board has no problem so we tested it again at shop where i bought it. and for the second time i proved it again to be defective. and they replaced my board with a brandnew one early this morning.

  8. #58
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: team xtreem dark on ep45 DS3R

    Nice to hear, I mean that you finally got a new one not that it was a long wait.

    So how it it working for you? Good I hope

Page 6 of 6 FirstFirst ... 456

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •