Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 6 123 ... LastLast
Results 1 to 10 of 58

Thread: team xtreem dark on ep45 DS3R




  1. #1
    Join Date
    Aug 2008
    Posts
    68

    Default team xtreem dark on ep45 DS3R

    ok here i am again.

    the problem is i can't maximize the ram i just bought. team xtreem dark 1066 2x1g 5-5-5-15 @ 2.2V~2.3v

    specs:
    e4300 core2duo @ 356fsbx9 = 3.2ghz
    GA ep45 DS3r
    team xtreem ddr2 1066 5-5-5-15 2.2~2.3

    now heres my settings

    MB Intelligent Tweaker(M.I.T.)

    Robust Graphics Booster Auto
    CPU Frequency 3.2GHz ( 356x9)

    CPU Host Clock Control [Enabled]
    CPU Host Frequency (Mhz) 356 Mhz (FSB)
    PCI Express Frequency (Mhz) Set to 100
    Advanced Clock Control [Press Enter]
    CPU Clock Drive 800
    PCI Express Clock Drive 900
    CPU Clock Skew (ps) 0
    MCH Clock Skew (ps) 0
    "
    "
    DRAM Performance Control
    Performance Enhance [STANDARD]
    Extreme Memory Profile (X.M.P.)-------> I CANT SEE THIS IN MY BIOS
    (G)MCH Frequency Latch 333
    System Memory Multiplier 2.40B
    Memory Frequency (Mhz) 854MHZ
    DRAM Timing Selectable [Manual]
    Standard Timing Control
    CAS Latency Time ------------5
    tRCD -------------------------5
    tRP---------------------------5
    tRAS------------------------ 15
    Advanced Timing Control [Press Enter]
    tRRD -------3
    tWTR ------9
    tWR -------3
    tRFC ------38
    tRTP -------3
    Command Rate (CMD) (AUTO)
    Channel A
    Static tRead Value (7-10) 7
    tRD Phase0 Adjustment Auto
    tRD Phase1 Adjustment Auto
    tRD Phase2 Adjustment Auto
    tRD Phase3 Adjustment Auto
    Trd2rd(Different Rank) Auto
    Twr2wr(Different Rank) Auto
    Twr2rd(Different Rank) Auto
    Trd2wr(Same/Diff Rank) Auto
    Dimm1 Clock Skew Control Auto ps
    Dimm2 Clock Skew Control Auto ps
    Channel B
    Static tRead Value (7-10) 7
    tRD Phase0 Adjustment Auto
    tRD Phase1 Adjustment Auto
    tRD Phase2 Adjustment Auto
    tRD Phase3 Adjustment Auto
    Trd2rd(Different Rank) Auto
    Twr2wr(Different Rank) Auto
    Twr2rd(Different Rank) Auto
    Trd2wr(Same/Diff Rank) Auto
    Dimm1 Clock Skew Control Auto ps
    Dimm2 Clock Skew Control Auto ps
    Motherboard Voltage Control
    Voltage Type Manual

    CPU

    CPU Vcore <<<<1.43750(stablest because of the v droop)
    CPU Termination <<<1.2v
    CPU PLL 1.500V <<< 1.5v
    CPU Referen 0.755V <<< Leave
    CPU Reference2 0.800V <<< Leave

    MCH/ICH

    MCH Core 1.100V <<< 1.200v
    MCH Reference 0.800V <<< Leave
    MCH/DRAM Ref 0.900V <<< Leave
    ICH I/O 1.500v<<<<< 1.5v

    DRAM

    DRAM Voltage 1.800V ----- 2.0(i did not use 2.2 as it was overvoltage to 854mhz only
    DRAM Termination 0.900V <<< Leave
    Channel A Reference 0.900V <<< Leave
    Channel B Reference 0.900V <<< Leave


    this is the only stable i can get. in OCCT for 2 hours+ memtest pass

  2. #2
    Join Date
    Aug 2008
    Posts
    68

    Default Re: team xtreem dark on ep45 DS3R

    now heres the settings i tried in order to maximize my memory to 1066

    MB Intelligent Tweaker(M.I.T.)

    Robust Graphics Booster Auto
    CPU Frequency 2.4ghz( 266x9)

    CPU Host Clock Control [Enabled]
    CPU Host Frequency (Mhz) 266 Mhz (FSB)
    PCI Express Frequency (Mhz) Set to 100
    Advanced Clock Control [Press Enter]
    CPU Clock Drive 800
    PCI Express Clock Drive 900
    CPU Clock Skew (ps) 0
    MCH Clock Skew (ps) 0
    "
    "
    DRAM Performance Control
    Performance Enhance [STANDARD]
    Extreme Memory Profile (X.M.P.)-------> I CANT SEE THIS IN MY BIOS
    (G)MCH Frequency Latch 333
    System Memory Multiplier 4.0
    Memory Frequency (Mhz) 1066MHZ
    DRAM Timing Selectable [Manual]
    Standard Timing Control
    CAS Latency Time ------------5
    tRCD -------------------------5
    tRP---------------------------5
    tRAS------------------------ 15
    Advanced Timing Control [Press Enter]
    tRRD -------3-7
    tWTR ------9-11
    tWR -------3-6
    tRFC ------38-42
    tRTP -------3-5
    Command Rate (CMD) (AUTO)
    Channel A
    Static tRead Value (7-10) 7-12
    tRD Phase0 Adjustment Auto
    tRD Phase1 Adjustment Auto
    tRD Phase2 Adjustment Auto
    tRD Phase3 Adjustment Auto
    Trd2rd(Different Rank) Auto
    Twr2wr(Different Rank) Auto
    Twr2rd(Different Rank) Auto
    Trd2wr(Same/Diff Rank) Auto
    Dimm1 Clock Skew Control Auto ps
    Dimm2 Clock Skew Control Auto ps
    Channel B
    Static tRead Value (7-10) 7-12
    tRD Phase0 Adjustment Auto
    tRD Phase1 Adjustment Auto
    tRD Phase2 Adjustment Auto
    tRD Phase3 Adjustment Auto
    Trd2rd(Different Rank) Auto
    Twr2wr(Different Rank) Auto
    Twr2rd(Different Rank) Auto
    Trd2wr(Same/Diff Rank) Auto
    Dimm1 Clock Skew Control Auto ps
    Dimm2 Clock Skew Control Auto ps

    CPU

    CPU Vcore <<<<1.4v
    CPU Termination <<<1.2v
    CPU PLL 1.500V <<< 1.5v
    CPU Referen 0.755V <<< Leave
    CPU Reference2 0.800V <<< Leave

    MCH/ICH

    MCH Core 1.100V <<< 1.200v
    MCH Reference 0.800V <<< Leave
    MCH/DRAM Ref 0.900V <<< Leave
    ICH I/O 1.500v<<<<< 1.5v

    DRAM

    DRAM Voltage 1.800V ----- 2.2v
    DRAM Termination 0.900V <<< Leave
    Channel A Reference 0.900V <<< Leave
    Channel B Reference 0.900V <<< Leave


    loop on/off then back to default settings again.i cant get through.

  3. #3
    Join Date
    Aug 2008
    Posts
    68

    Default Re: team xtreem dark on ep45 DS3R

    3rd settings
    MB Intelligent Tweaker(M.I.T.)

    Robust Graphics Booster Auto
    CPU Frequency 32.4GHz ( 266x9)

    CPU Host Clock Control [Enabled]
    CPU Host Frequency (Mhz) 266 Mhz (FSB)
    PCI Express Frequency (Mhz) Set to 100
    Advanced Clock Control [Press Enter]
    CPU Clock Drive 800
    PCI Express Clock Drive 900
    CPU Clock Skew (ps) 0
    MCH Clock Skew (ps) 0
    "
    "
    DRAM Performance Control
    Performance Enhance [STANDARD]
    Extreme Memory Profile (X.M.P.)-------> I CANT SEE THIS IN MY BIOS
    (G)MCH Frequency Latch (AUTO)
    System Memory Multiplier (AUTO)
    Memory Frequency (Mhz) 1066MHZ
    DRAM Timing Selectable (AUTO)
    Standard Timing Control
    CAS Latency Time ------------5-5
    tRCD -------------------------5 -5
    tRP---------------------------5 -5
    tRAS------------------------ 15 -18
    Advanced Timing Control [Press Enter]
    tRRD -------(auto)
    tWTR ------(auto)
    tWR -------(auto
    tRFC ------(auto
    tRTP -------(auto
    Command Rate (CMD) (AUTO)
    Channel A
    Static tRead Value (7-10) (auto)
    tRD Phase0 Adjustment Auto
    tRD Phase1 Adjustment Auto
    tRD Phase2 Adjustment Auto
    tRD Phase3 Adjustment Auto
    Trd2rd(Different Rank) Auto
    Twr2wr(Different Rank) Auto
    Twr2rd(Different Rank) Auto
    Trd2wr(Same/Diff Rank) Auto
    Dimm1 Clock Skew Control Auto ps
    Dimm2 Clock Skew Control Auto ps
    Channel B
    Static tRead Value (7-10) (auto)
    tRD Phase0 Adjustment Auto
    tRD Phase1 Adjustment Auto
    tRD Phase2 Adjustment Auto
    tRD Phase3 Adjustment Auto
    Trd2rd(Different Rank) Auto
    Twr2wr(Different Rank) Auto
    Twr2rd(Different Rank) Auto
    Trd2wr(Same/Diff Rank) Auto
    Dimm1 Clock Skew Control Auto ps
    Dimm2 Clock Skew Control Auto ps
    Motherboard Voltage Control
    Voltage Type Manual

    CPU

    CPU Vcore <<<<1.4v
    CPU Termination <<<1.2v
    CPU PLL 1.500V <<< 1.5v
    CPU Referen 0.755V <<< Leave
    CPU Reference2 0.800V <<< Leave

    MCH/ICH

    MCH Core 1.100V <<< 1.200v
    MCH Reference 0.800V <<< Leave
    MCH/DRAM Ref 0.900V <<< Leave
    ICH I/O 1.500v<<<<< 1.5v

    DRAM

    DRAM Voltage 1.800V ----- 2.2v
    DRAM Termination 0.900V <<< Leave
    Channel A Reference 0.900V <<< Leave
    Channel B Reference 0.900V <<< Leave


    i cant get through bios but can't continue it hangs a few seconds then automatically restart.

  4. #4
    Join Date
    Aug 2008
    Posts
    68

    Default Re: team xtreem dark on ep45 DS3R

    MB Intelligent Tweaker(M.I.T.)

    Robust Graphics Booster Auto
    CPU Frequency 2.2GHz ( 266x9)

    CPU Host Clock Control [Enabled]
    CPU Host Frequency (Mhz) 266 Mhz (FSB)
    PCI Express Frequency (Mhz) Set to 100
    Advanced Clock Control [Press Enter]
    CPU Clock Drive 800
    PCI Express Clock Drive 900
    CPU Clock Skew (ps) 0
    MCH Clock Skew (ps) 0
    "
    "
    DRAM Performance Control
    Performance Enhance [STANDARD]
    Extreme Memory Profile (X.M.P.)-------> I CANT SEE THIS IN MY BIOS
    (G)MCH Frequency Latch i tried everything that can reach 1066
    System Memory Multiplier i tried everything that can reach 1066
    Memory Frequency (Mhz) MHZ 1066
    DRAM Timing Selectable---------i tried [Manual] or auto
    Standard Timing Control
    CAS Latency Time ------------5 -5-6
    tRCD -------------------------5 -5-6
    tRP---------------------------5 -5-6
    tRAS------------------------ 15-18-18
    Advanced Timing Control [Press Enter]
    tRRD -------3-3-7
    tWTR ------9 9-15
    tWR -------3 3-15
    tRFC ------38 -42-52
    tRTP -------3 -6
    Command Rate (CMD) (AUTO)
    Channel A
    Static tRead Value (7-10) 7-14
    tRD Phase0 Adjustment Auto -7-14
    tRD Phase1 Adjustment Auto
    tRD Phase2 Adjustment Auto
    tRD Phase3 Adjustment Auto
    Trd2rd(Different Rank) Auto
    Twr2wr(Different Rank) Auto
    Twr2rd(Different Rank) Auto
    Trd2wr(Same/Diff Rank) Auto
    Dimm1 Clock Skew Control Auto ps
    Dimm2 Clock Skew Control Auto ps
    Channel B
    Static tRead Value (7-10) 7-14
    tRD Phase0 Adjustment Auto
    tRD Phase1 Adjustment Auto
    tRD Phase2 Adjustment Auto
    tRD Phase3 Adjustment Auto
    Trd2rd(Different Rank) Auto
    Twr2wr(Different Rank) Auto
    Twr2rd(Different Rank) Auto
    Trd2wr(Same/Diff Rank) Auto
    Dimm1 Clock Skew Control Auto ps
    Dimm2 Clock Skew Control Auto ps
    Motherboard Voltage Control
    Voltage Type Manual

    CPU

    CPU Vcore <<<<1.4v
    CPU Termination 1.100v<<<1.3-1.4
    CPU PLL 1.500V <<< 1.5v-1.610
    CPU Referen 0.760V <<< 0.760

    MCH/ICH

    MCH Core 1.100V <<< 1.200v -1.300v
    MCH Reference 0.760V <<< 0.760
    MCH/DRAM Ref 0.900V <<< 0.910
    ICH I/O 1.500v<<<<< 1.5v

    DRAM

    DRAM Voltage 1.800V ----- 2.2-2.3v
    DRAM Termination 0.900V <<< 0.910v
    Channel A Reference 0.900V <<< 0.910
    Channel B Reference 0.900V <<< 0.910


    all the settings i did just loop on/off or going to windows loading screen then blank or bsod

  5. #5
    Join Date
    Aug 2008
    Posts
    68

    Default Re: team xtreem dark on ep45 DS3R

    please give me a hand LSD.

    i did set the GTL refs even if i dont undertand it. by the slightest condition example 0.900= 0.910( because there is no 0.900v when you adjust somethin in the main voltages.

    and it let me boot and through loading screen or irq post screen but will not let me start windows.

    i tried everything i can but i can't let it boot through 1066

    i can only boot at ratio below 900mhz even 854mhz is only running @ 333 2.40b

    i am having headaches here. trying to figure this out.

    i have no other board to test this 1066 memory i just talk to where i sold it from and his at a burial. so i think we are going to replace this rams if its defective or something. but i run memtest and it seem to have no errors detected what the hell.

    is it possible that my board is the problem?

  6. #6
    Join Date
    Aug 2008
    Posts
    68

    Default Re: team xtreem dark on ep45 DS3R

    dont mind the default voltages in the first and second,3rd post because i just copied them on other thread here just for reference.

    the last one is the real default voltages in the left side.

    i am hoping for a good reply from you LSD T_T. this is so wierd.

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: team xtreem dark on ep45 DS3R

    Try this, I think you are just trying Too many things with all different settings changing at once >>>>>

    MB Intelligent Tweaker(M.I.T.)

    Robust Graphics Booster Auto
    CPU Frequency 3.2GHz ( 356x9)

    CPU Host Clock Control [Enabled]
    CPU Host Frequency (Mhz) 356 Mhz (FSB)
    PCI Express Frequency (Mhz) Set to 100

    Advanced Clock Control [Press Enter]
    CPU Clock Drive 800
    PCI Express Clock Drive 900
    CPU Clock Skew (ps) 0
    MCH Clock Skew (ps) 0
    "
    "
    DRAM Performance Control
    Performance Enhance [STANDARD]
    Extreme Memory Profile (X.M.P.)-------> I CANT SEE THIS IN MY BIOS (Because your ram is likely not SPD Programed)

    (G)MCH Frequency Latch 333
    System Memory Multiplier 3.20
    Memory Frequency (Mhz) 1065MHZ
    DRAM Timing Selectable [Manual]

    Standard Timing Control
    CAS Latency Time ------------5
    tRCD -------------------------5
    tRP---------------------------5
    tRAS------------------------ 15
    Advanced Timing Control [Press Enter]

    tRRD -------4
    tWTR ------9
    tWR -------4
    tRFC ------42
    tRTP -------4
    Command Rate (CMD) 2

    Channel A
    Static tRead Value (7-10) 7-8
    tRD Phase0 Adjustment Auto
    tRD Phase1 Adjustment Auto
    tRD Phase2 Adjustment Auto
    tRD Phase3 Adjustment Auto
    Trd2rd(Different Rank) Auto
    Twr2wr(Different Rank) Auto
    Twr2rd(Different Rank) Auto
    Trd2wr(Same/Diff Rank) Auto
    Dimm1 Clock Skew Control Auto ps
    Dimm2 Clock Skew Control Auto ps
    Channel B
    Static tRead Value (7-10) 7-8
    tRD Phase0 Adjustment Auto
    tRD Phase1 Adjustment Auto
    tRD Phase2 Adjustment Auto
    tRD Phase3 Adjustment Auto
    Trd2rd(Different Rank) Auto
    Twr2wr(Different Rank) Auto
    Twr2rd(Different Rank) Auto
    Trd2wr(Same/Diff Rank) Auto
    Dimm1 Clock Skew Control Auto ps
    Dimm2 Clock Skew Control Auto ps
    Motherboard Voltage Control
    Voltage Type Manual

    CPU

    CPU Vcore <<<<1.43750(stablest because of the v droop) Maybe add a notch or two more, how much droop we talking at load?

    CPU Termination <<<1.45 -1.5v {Also Try Auto}
    CPU PLL 1.500V <<< 1.5v {Also Try Auto}
    CPU Referen 0.755V <<< Leave
    CPU Reference2 0.800V <<< Leave

    MCH/ICH

    MCH Core 1.100V <<< 1.250v
    MCH Reference 0.800V <<< Leave
    MCH/DRAM Ref 0.900V <<< Leave
    ICH I/O 1.500v<<<<< 1.5v

    DRAM

    DRAM Voltage 1.800V ----- 2.1
    DRAM Termination 0.900V <<< Leave
    Channel A Reference 0.900V <<< Leave
    Channel B Reference 0.900V <<< Leave

  8. #8
    Join Date
    Aug 2008
    Posts
    68

    Default Re: team xtreem dark on ep45 DS3R

    ill try it out right away.

    if i set 333mhz 3.20b 1139mhz will be the results.. its an overclocked memory so you think my ram should handle it?

    the vdroop is quite big. but its stable. 1.43750 is detected 1.39~ and up to 1.34xxx at full load on OCCT as it was moving not higher or lower than that.. i think its considered a v drop also.

    ill post back after 5 minutes
    Last edited by harry23lim; 09-18-2008 at 09:29 PM.

  9. #9
    Join Date
    Aug 2008
    Posts
    68

    Default Re: team xtreem dark on ep45 DS3R

    ok i just tried out the settings you gave LSD

    failed its not booting at all.

    i also tried setting termination, pll voltage to Auto and upping a notch and two more to the cpu V core.

    i also tried 8 first on static tread value and then 7 on the next setup.

    give me another setting LSD thanks

    is it really this hard to let a ddr2 1066 work? or is there something wrong with the devices im using?

  10. #10
    Join Date
    Aug 2008
    Posts
    68

    Default Re: team xtreem dark on ep45 DS3R

    up

Page 1 of 6 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •