Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 6 FirstFirst 12345 ... LastLast
Results 21 to 30 of 56

Thread: GA-EP35-DS3R and E8500




  1. #21
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP35-DS3R and E8500

    Hmm Is it seagate? Well whatever it is I'd just call them up and say the drive itself shorted out, nothing else was harmed. And if they ask, say yes this was in normal operation. No you was not plugging things in, the system was running fine until the drive shorted out and shut down.

    Stock?

    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [9]
    Fine Clock Ratio_____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [333]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [3.20C or D]
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 5
    Dram RAS# Precharge Delay_______ 5
    Precharge Delay (tRAS)__________12/15

    ACT to ACT Delay (tRRD)_________3-4
    Rank Write to READ Delay________ 3-6 (May need 9-11)
    Write to Precharge Delay_________ 4-6
    Refresh to ACT Delay______________ 48-50 << Tweak to (52-62)
    Read to Precharge Delay__________ 3-6
    Static tRead Value_______________ 7-12
    Static tRead Phase Adjust________ [Auto]

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] << Check sticker .3 is 2.1V
    PCI-E OverVoltage Control_ [+0.1V] For Stability
    FSB OverVoltage Control___ [+0.1V] For Stability
    (G)MCH OverVoltage Control [+0.1V - 0.15 - 0.2] << May need at least .15 for 2x2
    CPU Voltage Control_______ [1.xx]

    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]
    Last edited by Lsdmeasap; 09-28-2008 at 05:34 PM. Reason: Static tRead Changes, Posted incorrect values

  2. #22
    Join Date
    Sep 2008
    Posts
    31

    Default Re: GA-EP35-DS3R and E8500

    awsome thanks ok i got it up to 3.4 stable and still under 45oC o both core's

    this Heat sink fan is awsome it has its own speed contorler aswell

    now to adjust the memory :D many thanks mate

  3. #23
    Join Date
    Sep 2008
    Posts
    31

    Default Re: GA-EP35-DS3R and E8500

    it didnt like something as it wouldnt boot into Xp

    here are my settings


    Robust Graphic's booter [Auto]
    CPU clock Ratio [9x]
    fine cpu clock ratio [0.5]
    CPU Host Frequency [358]
    PCI express [100]
    CIA [dissabled]
    Performance [Standard]
    System Memory Multiplyer (SPD) [3.20]
    Memory frequency 800 1146
    DRAM timing selectable [Manual]
    CAS [5]
    RAS to CAS [5]
    RAS precharge [5]
    Precharge delay [15]

    act to act delay [4]
    Rank write to read delay [9]
    Write to precharge [6]
    Refresh to ACT delay [52]
    read to precharge [6]
    Static tread value [Auto]
    Static tread phase Adjust [31]

    DDR2/DDR3 [+0.3V]
    Pci-E overvoltage contorl [+0.1V]
    FSB overvoltager control [+0.1V]
    (G)MCH Overvoltage control [+0.1V]
    CPU Voltage control [1.35000V]

    where am i going wrong ?

  4. #24
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP35-DS3R and E8500

    Your ram may not do 1146+ without going to 655-15 or 666-15 or something along those lines.

    You may want to drop down to the 3.00 or 2.66 Multi

    And shzt! Sorry I posted wrong settings above for sure >>>

    Static tRead Value_______________ 7-12
    Static tRead Phase Adjust________ [Auto] << Always set to Auto
    Last edited by Lsdmeasap; 09-28-2008 at 05:34 PM.

  5. #25
    Join Date
    Sep 2008
    Posts
    31

    Default Re: GA-EP35-DS3R and E8500

    thanks ok its booting up at the new settings you have told me just going to run a stress test now

    3.5
    idle same as before

    100% load
    Core #0 46 oC
    Core #1 42 oC

    might stay at this speed not sure what you think ? push it till it wont boot then back off a little :D?

  6. #26
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  7. #27
    Join Date
    Sep 2008
    Posts
    31

    Default Re: GA-EP35-DS3R and E8500

    ok lets see where i can go :P

    do i need to up the Voltage when it wont boot obviously not silly ammounts?

  8. #28
    Join Date
    Sep 2008
    Posts
    31

    Default Re: GA-EP35-DS3R and E8500

    BSD as soon as i moved my mouse lmao erm didnt have time to read what the problem was will see what i can do :D

  9. #29
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP35-DS3R and E8500

    Yeap, you know it. You likely do not need 1.35 already, nor would you even need that for 4Ghz

    You may have thought so before and raised it. I bet the timings were throwing you off, you can surely lower it now

  10. #30
    Join Date
    Sep 2008
    Posts
    31

    Default Re: GA-EP35-DS3R and E8500

    what do you think i should be at now ?

Page 3 of 6 FirstFirst 12345 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •