Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: ep45-ds3r + q6600 @ 3.6 - strange problem




  1. #1
    Join Date
    Sep 2008
    Posts
    2

    Default ep45-ds3r + q6600 @ 3.6 - strange problem

    I overclocked my g0 q6600 CPU to 3.6ghz and was able to boot into windows. I also passed 12 hours of prime95 without errors. The strange thing is, even though i can get it to run in windows stable, i have trouble getting it to POST. When i turn on my computer with the 3.6 overclock, it wont POST 75% of the time and the motherboard resets itself. The other 25% it gets into windows and runs fine. I spent an hour tweaking the voltages without any luck. Is there anything else i can do?
    Last edited by rampur; 09-24-2008 at 09:52 AM.

  2. #2
    Join Date
    Sep 2008
    Location
    Canberra, Australia
    Posts
    206

    Default Re: ep45-ds3r + q6600 @ 3.6 - strange problem

    try pushing the vcore up to 1.375V or more (to beat cpu droop) and try manually pushing up your MCH voltage to around 1.2-1.3V. also, manually set your DRAM voltage to whatever it says on the stickers on the front of your DIMMs.

    What are your full system specs so i can help a little more
    NZXT Lexa BlackLine Case with Red LEDs
    Corsair TX-750 Modular PSU
    Gigabyte EP45-DS3P (BIOS F7)
    Intel Core 2 Quad Q9300 @ 3.73GHz (downclocked for the summer )
    OCZ Vendetta 2 CPU Heatsink
    2x 2GB Kingston HyperX RAM PC2-6400 @ 996MHz (4-5-5-15)
    3x Seagate Barracuda 7200.11 500GB HDD in RAID5
    2x HIS Radeon HD 4850 @ 745/1090 in CrossFireX
    2x ThermalTake DuOrb GPU Heatsink
    D-Link Super G PCI WLAN Adapter
    Asus Lightscribe 20x SATA II DVD-DL Burner
    Creative X-Fi XtremeGamer Fatal1ty Pro
    2x 22" LG W2252TQ-PF Widescreen LCD Monitor (YAY!! Finally got the second one!!)

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: ep45-ds3r + q6600 @ 3.6 - strange problem

    And please post your settings when you get time below. Often times Prime may pass if you are not using Blend so your ram timings being off wont matter. Was you running blend in this 12 hours test, or small or large FFT's instead? And are yuu sure you have not changed things since?

    Without full specs, and what settings you are using that are Prime stable and not windows stable we cannot best advise you. So... Please post back >>>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............:
    CPU Clock Ratio ..........................:
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................:


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<<
    PCI Express Clock Drive.................: <<<
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............:
    Memory Frequency (Mhz) ..............:
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................

    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2

    Channel A
    Static tRead Value.........................:7-10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:7-10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: <<< Leave
    CPU Referen.…………....0.755V*.......: <<< Leave
    CPU Reference2………,,0.800V*.......:<<< Leave

    MCH/ICH
    MCH Core…………….....1.100V...........: <<
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............:
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •