Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: Problem to boot GA-MA78GM-S2H

  1. #1
    Join Date
    Sep 2008

    Default Problem to boot GA-MA78GM-S2H


    I have problem to boot my GA-MA78GM-S2H. When I start the computer all fans, keyboard, mouse etc starts, but the screen stays blank, and no BIOS info is displayed. If I clear the CMOS (by using the CLR_CMOS jumper) I can the display to work, and enter the BIOS settings. But after I save and exit the screen goes black and the computer does not continue boot. If I instead continue to boot (F1) insetad of enter the BIOS setup I can get the computer to boot sucessfully. Bus as soon as I restart it won't boot again.

    I am using the GA-MA78GM-S2H with a Phenom X4 9550 and 2x2gb Corsair PC6400. The case I am using is Antec NSK1380 micro tower. I am using the VGA-output for display.

    I have tried to find help here by reading posts, but haven't found any solutions yet.

    Anyone with hints or suggestions? Thanks!


  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    PCB Island

    Default Re: Problem to boot GA-MA78GM-S2H

    Try using one stick in slot one and see if it boots. If so, you need to adjust your ram trfc for 2x2GB, and add some memory controller voltage, and set Ram voltage to spec for your ram

    As for the correct trfc adjustments I am not sure, you will have to wait for a AMD user to post, I would say try as high as your board will go. 52-62 is generally needed

    Or I can link you to some Overclock Forums with AMD sections if you would like

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts