Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 7 of 7

Thread: How to configure 2 x 2GB Muskin Enhanced PC6400 CL4 on a EP45-DS3L?




  1. #1
    Join Date
    Sep 2008
    Posts
    23

    Default How to configure 2 x 2GB Muskin Enhanced PC6400 CL4 on a EP45-DS3L?

    Hello Lsdmeasap,

    I need to configure the new memory i think. The mushkin 2 x 2GB Muskin Enhanced PC6400 CL4 is running on 4-4-4-15 @ 2.1v and 800MHZ.

    Maybe i need to configure more things, or is it good for now?

    Thank you for your help.

    Kind Regards,
    Last edited by Nmouloudi; 09-30-2008 at 07:01 PM.

  2. #2
    Join Date
    Sep 2008
    Location
    Canberra, Australia
    Posts
    206

    Default Re: How to configure 2 x 2GB Muskin Enhanced PC6400 CL4 on a EP45-DS3L?

    well what processor are you running and do you want to overclock it?

    I've got a few numbers in there for modern stock Intel processors just as a suggestion, but if you put in the settings you have now and tell us what procesor you're using and we can help a bit more.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio ..........................: ???
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: ???


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333MHz
    PCI Express Frequency (Mhz) .........:100MHz <-- Always 100!

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 333MHz
    System Memory Multiplier ..............: 2.40 (2.4x333=800MHz)

    Memory Frequency (Mhz) ..............: 800MHz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................4
    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................15

    Advanced Timing Control
    tRRD...........................................3-5
    tWTR.......................................... 3-6
    tWR............................................5-8
    tRFC...........................................52-58
    tRTP...........................................4-7
    Command Rate (CMD) ....................:2 (or Auto because its stock frequency in this setup)

    Channel A
    Static tRead Value.........................:8-10
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto

    Channel B
    Static tRead Value.........................:8-10
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.3-1.35V
    CPU Termination…..... 1.200V*.......: Auto
    CPU PLL…………………....1.500V*.......: Auto
    CPU Referen.…………....0.755V*.......: Auto
    CPU Reference2………,,0.800V*.......: Auto

    MCH/ICH
    MCH Core…………….....1.100V...........:1.2-1.35V (because you got 2x2GB)
    MCH Reference….…….0.800V...........:Auto
    MCH/DRAM Ref.…......0.900V...........:Auto
    ICH I/O……………….....1.550V............:Auto
    ICH Core…………...……1.100V............:Auto

    DRAM
    DRAM Voltage ……....1.800V............:2.1V (a bit more if you want to OC)
    DRAM Termination .…0.900V............:Auto
    Channel A Reference 0.900V............:Auto
    Channel B Reference 0.900V............:Auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]
    Last edited by BongWizard; 09-30-2008 at 07:56 PM.
    NZXT Lexa BlackLine Case with Red LEDs
    Corsair TX-750 Modular PSU
    Gigabyte EP45-DS3P (BIOS F7)
    Intel Core 2 Quad Q9300 @ 3.73GHz (downclocked for the summer )
    OCZ Vendetta 2 CPU Heatsink
    2x 2GB Kingston HyperX RAM PC2-6400 @ 996MHz (4-5-5-15)
    3x Seagate Barracuda 7200.11 500GB HDD in RAID5
    2x HIS Radeon HD 4850 @ 745/1090 in CrossFireX
    2x ThermalTake DuOrb GPU Heatsink
    D-Link Super G PCI WLAN Adapter
    Asus Lightscribe 20x SATA II DVD-DL Burner
    Creative X-Fi XtremeGamer Fatal1ty Pro
    2x 22" LG W2252TQ-PF Widescreen LCD Monitor (YAY!! Finally got the second one!!)

  3. #3
    Join Date
    Sep 2008
    Posts
    23

    Default Re: How to configure 2 x 2GB Muskin Enhanced PC6400 CL4 on a EP45-DS3L?

    Oke i have an Core 2 Quad Q9550 @ 2.83 and i do not overclock.

    Everything is running on stock. I put the Vcore at 1.15v in the bios. And its running at 333 x 8.5 . Memory at 2.1v and 4-4-4-15.

    Is this enough or do you need more?

    Thanks anyway.

    Greetz,

  4. #4
    Join Date
    Sep 2008
    Location
    Canberra, Australia
    Posts
    206

    Default Re: How to configure 2 x 2GB Muskin Enhanced PC6400 CL4 on a EP45-DS3L?

    thats plenty, thanks... try setting the memory multiplier at 2.40 and the timings as in my last post. Also trying upping your vcore to 1.25-1.3V, it should give you a bit more stability with the extra juice getting to the cores
    NZXT Lexa BlackLine Case with Red LEDs
    Corsair TX-750 Modular PSU
    Gigabyte EP45-DS3P (BIOS F7)
    Intel Core 2 Quad Q9300 @ 3.73GHz (downclocked for the summer )
    OCZ Vendetta 2 CPU Heatsink
    2x 2GB Kingston HyperX RAM PC2-6400 @ 996MHz (4-5-5-15)
    3x Seagate Barracuda 7200.11 500GB HDD in RAID5
    2x HIS Radeon HD 4850 @ 745/1090 in CrossFireX
    2x ThermalTake DuOrb GPU Heatsink
    D-Link Super G PCI WLAN Adapter
    Asus Lightscribe 20x SATA II DVD-DL Burner
    Creative X-Fi XtremeGamer Fatal1ty Pro
    2x 22" LG W2252TQ-PF Widescreen LCD Monitor (YAY!! Finally got the second one!!)

  5. #5
    Join Date
    Sep 2008
    Posts
    23

    Default Re: How to configure 2 x 2GB Muskin Enhanced PC6400 CL4 on a EP45-DS3L?

    Oke thank you very much i will set it on the settings that you gave me.

    Thanks for the help.

    But 1.25 is the advised Vcore thats on the box of the CPU.

  6. #6
    Join Date
    Sep 2008
    Location
    Canberra, Australia
    Posts
    206

    Default Re: How to configure 2 x 2GB Muskin Enhanced PC6400 CL4 on a EP45-DS3L?

    then set it to at least 1.25V, but remember that you have to compensate for CPU droop (which P45s are notorious for!) caused by heating of the silicon. even though it says that, i believe it also says that you "should never operate this processor at a temperature greater the 36 C" as well, but thats not gonna happen either.

    Just try the settings, i guarantee its not gonna hurt your CPU
    NZXT Lexa BlackLine Case with Red LEDs
    Corsair TX-750 Modular PSU
    Gigabyte EP45-DS3P (BIOS F7)
    Intel Core 2 Quad Q9300 @ 3.73GHz (downclocked for the summer )
    OCZ Vendetta 2 CPU Heatsink
    2x 2GB Kingston HyperX RAM PC2-6400 @ 996MHz (4-5-5-15)
    3x Seagate Barracuda 7200.11 500GB HDD in RAID5
    2x HIS Radeon HD 4850 @ 745/1090 in CrossFireX
    2x ThermalTake DuOrb GPU Heatsink
    D-Link Super G PCI WLAN Adapter
    Asus Lightscribe 20x SATA II DVD-DL Burner
    Creative X-Fi XtremeGamer Fatal1ty Pro
    2x 22" LG W2252TQ-PF Widescreen LCD Monitor (YAY!! Finally got the second one!!)

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: How to configure 2 x 2GB Muskin Enhanced PC6400 CL4 on a EP45-DS3L?

    And you may be able to lower ram timings to 4-4-4-12, and static tRead to 7 depending on if 4-4-4-12 passes memtest. You may also be able to use 400 MCH latch, and 1066 Driving strength profiles, if you want to play around with things with more benchmarks and memtesting

    Also, you can likely lower the Ram voltage to 2.0 - 2.05 Mushkins seem to run great if not better under stock voltage

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •