Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Thread: Ram Voltaj Some help pls




  1. #1
    Join Date
    Oct 2008
    Posts
    11

    Default Ram Voltaj Some help pls

    Briefly

    Motherboard Name Gigabyte GA-P35C-DS3
    Memory Module 2 x A-Data EXTREME DDR2 1066+

    In bios from 1.8v +4v
    In windows DIMM 1.94 V

    Result : memory don't work on 1066 5.5.5.12 only 1000mhz 5.5.5.15 max.

    What say can i take risks and tray +6 or maybe +7 and hope for real 2.2-2.3 safe :D

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ram Voltaj Some help pls

    I would say 2.1 actual would be enough, so maybe set +4 and see what you get in windows.

    Are you using the latest BIOS? If not, please read this and get a newer version >>>
    http://forums.tweaktown.com/f69/bios...h-guide-27576/

  3. #3
    Join Date
    Oct 2008
    Posts
    11

    Default Re: Ram Voltaj Some help pls

    Allredy have +4 and result only 1.94 and with +5 I have 2.0v in windows ... somthing is rong here

  4. #4
    Join Date
    Apr 2008
    Posts
    942

    Default Re: Ram Voltaj Some help pls

    Ignoring what ever utility you are using in windows to check voltages, what does the Bios PC Health Screen report?
    GA-P35C-DS3R Rev2.0 F11 bios, E8200 (@3.0Ghz), OCZ DDR3 PC3-10666 Reaper 4GB (@1200Mhz), Xonar D1, 8800GTS 512, Corsair HX520 (Single 12volt line, Max 40A), WDC 3200aaks/5000aaks in AHCI mode, Vista 64 Premium.

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ram Voltaj Some help pls

    Right! Thanks, I should have asked what he was using to see this.

    If you do see the same in the PC Health section of the BIOS, please let us know what BIOS you are using. You may need a update if you are using a old one.

    To check BIOS version, in the BIOS hit F9 and you will see

  6. #6
    Join Date
    Oct 2008
    Posts
    11

    Default Re: Ram Voltaj Some help pls

    Bios V. F3 ...
    Bios don't help me
    See this ...
    Attached Images Attached Images Ram Voltaj Some help pls-bios-jpg 

  7. #7

    Default Re: Ram Voltaj Some help pls

    You need to update your BIOS ASAP. Moreover, the F3 is not in the list anymore so probably, is not a good one. The last not BETA for your MB is the F6. Try it.
    GA-Z97-D3H Windows Pro 8.1
    i5-4690K + Corsair H90
    Sapphire Radeon R7 240
    16GB (2x8GB) DDR3 Corsair Vengeance Pro 2400MHz PC3 19200
    Corsair CX750M
    Samsung SSD 840 EVO 500 GB

    Sharkoon VS-3V tower

  8. #8
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ram Voltaj Some help pls

    Right, and the above image means you are only set to Auto 1.8V

    But like svcglobal said, that BIOS has been pulled so there was likely issues with it.

    Please read this to be sure you do a proper flash >>>
    http://forums.tweaktown.com/f69/bios...h-guide-27576/

  9. #9
    Join Date
    Oct 2008
    Posts
    11

    Default Re: Ram Voltaj Some help pls

    Just update bios to F6 and what you think ... nothing happened
    everything is the same ,even PC Health look the same ... i don't see voltage only OK .
    I set +3v and but only 1.92-1.94v in win :|
    What now ? :D Help ME

    PS : Scare me theat page how so many things can go rong when update bios

    Latter edit ... and tell me some settings for E6300 OC @3200 .... I have now @2800 ,400 FSB , 2.5 Ration = 1000 Mhz Memory with +1v to FSB and +1v on somthing for stability +3v memory / 1.27v for CPU
    Last edited by Masinuta; 10-08-2008 at 03:29 AM.

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ram Voltaj Some help pls

    You dont see voltage only ok? What do you mean

    Sounds like you did not properly flash. All of your settings should have been erased. You need to load optimized defaults right after you flash, save and apply, and reboot back to the BIOS to then make your changes all over again.

    And, what are you using in windows to check Ram voltages with?

    Please do that, and then fill this in with what you have now and I will post back for 3.2 >>>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8]
    Fine Clock Ratio ____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    CAS Latency Time________________ ?
    Dram RAS# to CAS# Delay_________ ?
    Dram RAS# Precharge Delay_______?
    Precharge Delay (tRAS)__________ ?

    ACT to ACT Delay (tRRD)_________ ?
    Rank Write to READ Delay________ ?
    Write to Precharge Delay_________ ?
    Refresh to ACT Delay______________ ?
    Read to Precharge Delay__________ ?
    Static tRead Value_______________ 1-31
    Static tRead Phase Adjust________ [Auto]

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V]
    PCI-E OverVoltage Control_ [+0.1V]
    FSB OverVoltage Control___ [+0.1V]
    (G)MCH OverVoltage Control [+0.1V]
    CPU Voltage Control_______ [1.25]

    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •