Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 10 of 15 FirstFirst ... 89101112 ... LastLast
Results 91 to 100 of 143

Thread: Ep45-DS3R with E7300 need serious help :<




  1. #91
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ep45-DS3R with E7300 need serious help :<

    I believed you, just wanted to be sure you was sure. HAHA

    Well, looks to me like you are running full speed of x16, that is what I wanted to check "Bus Interface". So not really sure why your score is so low then, I do know driver versions will make it vary, but it should not be half of what you expect.

  2. #92

    Default Re: Ep45-DS3R with E7300 need serious help :<

    well im sure u wanted to be sure the i was sure XDDDDDDD
    "but it should not be half of what you expect."
    absolutely right,but lets say i have no drivers, what would the score be?

  3. #93
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ep45-DS3R with E7300 need serious help :<

    Wow, I don't know about with no drivers. Is that how you was testing it?

  4. #94

    Default Re: Ep45-DS3R with E7300 need serious help :<

    no dude XD I'm running the newest 8.10hotfix XDD
    was just curious what i would get with no drivers at all, 2 days left till i give them my pc.
    btw, should i open a new thread when i get my stuff and start oc? or continue wit this one.

  5. #95
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ep45-DS3R with E7300 need serious help :<

    Ahh, I wondered why you asked that!

    Dont matter to me, if you do make a new thread please post your specs again so I dont get lost

  6. #96

    Default Re: Ep45-DS3R with E7300 need serious help :<

    aight :D i will stick with this thread :PP
    just something i've been thinking,i will start from overclocking my RAM, and just then OC my pc, this is what i mean:

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 6
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 2666


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 444Mhz
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<0
    MCH Clock Skew (ps)...................: <<<0


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [400]
    System Memory Multiplier ..............: 2.00
    Memory Frequency (Mhz) ..............: 888
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................12

    Set all highest below first then lower later

    Advanced Timing Control
    tRRD...........................................4
    tWTR..........................................11
    tWR............................................12
    tRFC...........................................58
    tRTP...........................................5
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................ 1066

    Channel A
    Static tRead Value.........................:11
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:11
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:Auto
    CPU Termination…..... 1.200V*.......: <<< Auto
    CPU PLL…………………....1.500V*.......: <<< Auto
    CPU Referen.…………....0.755V*.......: <<< Auto
    CPU Reference2………,,0.800V*.......:<<< Auto

    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.24\1.26 whatever will work
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 2.1(ram sticker says 4-4-4-12 at 800mz 2.1V)

    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB


    my idea, is setting the bus speed with the lowest multi, so it will have the speed as stock speed 444*6=~266*100

    run memtest for the whole night, if it passes, will start screwing around with the CPU, raise multi to 6.5 and set the cores not on auto, and then again increasing multi to 7, try with the same voltage, if it isn't stable i will be raising it by 2 increments, and so on, is it a good idea? those are just ideas, when i will actually get the board, i wont do anything before u say so :D cause last time i was really jumping arround which made our both life harder :D
    so be ready to suffer another impact of newbie OC!!!!! muhaha :D
    and thanks for everything :D

  7. #97
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ep45-DS3R with E7300 need serious help :<

    Well, there is many ways to go about overclocking. Whatever you think works best for you is fine, as long as you test as you go. And do not jump around from this to that and confuse yourself on what works and what does not.

    How I do it? I pick a high speed and work only on getting that stable, such as highest FSB possible, or Highest CPU speed I want to run 24/7. Once I have those saved as profiles I test many variables between for certain setups or reasons

    Starting out with the lowest multi is going to make your testing longer for sure, but like I said anyway you do it is fine. It will help you learn what does what however you go about it

  8. #98

    Default Re: Ep45-DS3R with E7300 need serious help :<

    great,well i will first need to get my pc XD
    and,for the beginning i will use the settings you will tell me, and if i wont succeed i will go on the hard way.
    thank you :D

  9. #99
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ep45-DS3R with E7300 need serious help :<

    Ill help ya for sure, dont worry! When do you get your system back?

  10. #100

    Default Re: Ep45-DS3R with E7300 need serious help :<

    im currently using my system, but its bugged up, so i cant do anything above posting\playing on low fps XDD
    im just letting them take my pc in 2 days from now, and it will take them 2 days approx to fix it(hopefully), so 4 days from now i will start the OC, hopefully :P
    can't wait!!

Page 10 of 15 FirstFirst ... 89101112 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •