Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 12 of 15 FirstFirst ... 21011121314 ... LastLast
Results 111 to 120 of 143

Thread: Ep45-DS3R with E7300 need serious help :<




  1. #111

    Default Re: Ep45-DS3R with E7300 need serious help :<

    WOW CANT BELIEVE IT !!! I QFLASHED!!! WOOOHOOO!!! :D
    i think i flashed to F7. apperently there is only 1 revision to this board, so now i checked if the settings: cpu reference 2 , ICH core, Virtualization technology appears, and the answer is no!
    i still dont have these option, and i should have them!!
    very weird, i tried ctrl+f1 at the main screen as well(after the q flash, i went in bios immediately and pressed F10( save and exit) like you've said)
    but nothing appears, weird :S
    but lets try to OC, could u please post me settings for 3.4?
    i just tried 3.ghz with 334 FSB, and upped vcore to 1.25 bios(not much but read further) i have a feeling i cant pass the 333FSB :| i will post the exact settings i've tried,and i will try 368 at 8 multiplier, with no changes on vcore, and we will see.
    and btw it seems now i dont have the option for DRAM DRIVING FORCE 1066\800 ,
    it's just gone :S

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: [FAST]
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3.0GHZ


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 334Hz
    PCI Express Frequency (Mhz) .........:100MHz <--Always 100!!

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control
    CPU Clock Drive...........................:800 -->>>> Didnt touch those
    PCI Express Clock Drive.................:900 -->>>> Didnt touch those
    CPU Clock Skew (ps)....................:0
    MCH Clock Skew (ps)...................:0


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 333
    System Memory Multiplier ..............: 2.40b
    Memory Frequency (Mhz) ..............: 802Mhz
    DRAM Timing Selectable ................: [manual]
    4
    4
    4
    12

    Advanced Timing Control
    tRRD...........................................5
    tWTR..........................................10
    tWR............................................10
    tRFC...........................................58
    tRTP...........................................5
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................DONT HAVE THIS OPTION

    Channel A
    Static tRead Value.........................:10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.25
    CPU Termination…..... 1.200V*.......: Auto
    CPU PLL…………………....1.500V*.......: Auto
    CPU Referen.…………....0.755V*.......: Auto
    CPU Reference2 DONT HAVE THIS OPTION

    MCH/ICH
    MCH Core…………….....1.100V...........:1.26
    MCH Reference….…….0.800V...........:Auto
    MCH/DRAM Ref.…......0.900V...........:Auto
    ICH I/O……………….....1.550V............:Auto
    ICH Core…………...……1.100V............:Auto

    DRAM
    DRAM Voltage ……....1.800V............:2.1

    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]DONT HAVE THIS OPTION

    not stable in LINX(like intel burn) after 2 tests,i know vcore is low, but it still should work on 3.0ghz with this core, and i used timings 4-4-4-12 at 800mhz @2.1V cause that is what the corsair support told me, that they have tested it on 800mhz 2.1 v and these timings, so i dont think loosing them up in such low speed will have any effect.
    that's weird, ill just wait for tomorrow :S
    and temp was awful!!!
    mobo jumped from 50 with normal vcore to 53 with this vcore(idle\load doesnt change)
    and cpu to 47 and cpu cores to 53 :S in LINX with this small vcore, while my friend is getting 70 degrees with LINX with 1.417 vcore(or 1.45 dont remember) (he has E5200@ 4.ghz with Ep35-DS3L i think)
    EDIT:i guess i use 2 low Vcore :<
    but temps will go crazy if i get above 1.3 :<
    Last edited by Dweirdo; 10-25-2008 at 09:15 PM.

  2. #112
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ep45-DS3R with E7300 need serious help :<

    To use XP mode on a program all you do is right click the exe or shortcut and Choose properties, then compatibility tab and choose XP SP2 compatibility mode

    Virtualization depends on your CPU so your CPU may not offer it being a budget CPU

    Yes, Intel Burn/LinX makes things VERY HOT, if you do not have a great cooler you may not be able to use that as a test and should use orthos and memtest86+ instead.

    Keep in mind your board has a Vdrop from what voltage you set in the BIOS to what you actually get, so you may need far more then 1.25 as that may only be 1.19 or so real voltage applied

  3. #113

    Default Re: Ep45-DS3R with E7300 need serious help :<

    Quote Originally Posted by Lsdmeasap View Post
    To use XP mode on a program all you do is right click the exe or shortcut and Choose properties, then compatibility tab and choose XP SP2 compatibility mode

    Virtualization depends on your CPU so your CPU may not offer it being a budget CPU

    Yes, Intel Burn/LinX makes things VERY HOT, if you do not have a great cooler you may not be able to use that as a test and should use orthos and memtest86+ instead.

    Keep in mind your board has a Vdrop from what voltage you set in the BIOS to what you actually get, so you may need far more then 1.25 as that may only be 1.19 or so real voltage applied
    good info about the xp sp2 mode, didnt know this ^^
    my cooler is not bad, and Linx is great, 4 mins are enough for knowing if ur stable or NOT :D
    ok im giving up my pc today :< hope it will come back soon <3 :D

  4. #114
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ep45-DS3R with E7300 need serious help :<

    Yeah, some not many, will need XP Mode still. I only have a few (3-4) apps that still need it, most are fine in Vista nowadays as long as you have the latest

    So in LinX you run the longer test? I have not so just wondered how long, or which test was 4 minutes

  5. #115

    Default Re: Ep45-DS3R with E7300 need serious help :<

    Quote Originally Posted by Lsdmeasap View Post
    Yeah, some not many, will need XP Mode still. I only have a few (3-4) apps that still need it, most are fine in Vista nowadays as long as you have the latest

    So in LinX you run the longer test? I have not so just wondered how long, or which test was 4 minutes
    i did 3 tests, and in minute 4 it stopped with error :D so this is what i meant when i said 4 minutes to see if ur stable or not XD no need to wait 3 hours, i chose 1536MB memory 3 tests.
    Last edited by Dweirdo; 10-27-2008 at 04:55 AM.

  6. #116
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ep45-DS3R with E7300 need serious help :<

    K, thanks! I think I have only ran the shorter tests. Just havent played with it yet I guess, been waiting on my better radiator

  7. #117

    Default Re: Ep45-DS3R with E7300 need serious help :<

    :D
    Wow man you gotta hear this:
    i was supposed to get my pc today, i drove there, they were going to give me the PC with the replaced motherboard, and then i asked, did u check the video card on 3dMARK VANTAGE, and he said : "yes, it's fine", then i asked what score has it scored, he said more then 3K :|||, so i said, what's fine about it, it should easily pass the 12k, then he said: "Ah, i didn't check how much it is supposed to score, ok we will replace the video card as well" ROFL MY ASS OFF!!!
    is that n00bn33s at its' boiling point ?

  8. #118
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ep45-DS3R with E7300 need serious help :<

    Damn, sorry to hear that! What a NOOB!!!!

    For sure build your own next time so you wont have to wait on Noob's to fix things!

  9. #119

    Default Re: Ep45-DS3R with E7300 need serious help :<

    I won't say im an expert either, but definitely next build im gonna build by my own(with ur help :PP)
    the pc should be back today or tomorrow :D then ill start oc.

  10. #120
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ep45-DS3R with E7300 need serious help :<

    Ya, it is Really simple actually. I have helped quite a few people do it. Provided you can get the items you need where you are you will have a much better time doing it yourself and save $$ as well

Page 12 of 15 FirstFirst ... 21011121314 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •