Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 15 FirstFirst ... 2345614 ... LastLast
Results 31 to 40 of 143

Thread: Ep45-DS3R with E7300 need serious help :<




  1. #31

    Default Re: Ep45-DS3R with E7300 need serious help :<

    it went to page 4 omg, there is another post before this ,check it out if u missed it, the last on page 3 :D

    OKOKOKOKOK BAD NEWS AND GOOD NEWS:

    good news, i understood why i couldnt boot, apparently, ell i didnt know ,that when u press F7 and it does optimized defaults, it doesnt do them for the ted phases and twr2rd, dimm clock skew control, in other words the channel things, and some of them were not auto ( like i said in the first page on this page) in this was the problem!! i thought they were the optimized defaults, stupid me.
    so i boot up with static this settings:

    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................18

    Advanced Timing Control
    tRRD...........................................5
    tWTR..........................................12
    tWR............................................14
    tRFC...........................................68
    tRTP...........................................6
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................1066

    Channel A
    Static tRead Value.........................:11

    tRD Phase0 Adjustment...................:<<< Leave for all below as well(i left them XD they were not auto in channel b though,so needed to make them auto)
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:11
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.4
    high and lower later. Will be .6 less in windows

    CPU Termination…..... 1.200V*.......: <<< 1.34
    CPU PLL…………………....1.500V*.......: <<< 1.57(ddint have 1.56 as option, i think this is 1 or 2 increments)
    CPU Referen.…………....0.873*.......: <<< .64% Of Vtt (Termination above)


    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.3(2 much?)
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 2.0
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    latch is 400, now the bad news :{
    after successfully booting, it didnt show the windows yet and i got BSOD :S
    so took the voltages up to 1.425, it got in the windows and 5 seconds later BSOD :S
    went back to 1.4 and 378 MHZ FSB, in 9 mp, so its 3.420, checking for stability,
    10 minutes and no annoying error for now thx god and thank you :D
    so u WILL need to help me getting it to 3.6-3.8!!! :"PP
    temps are ok?
    load :
    Motherboard 49 C (120 F)
    CPU 51 C (124 F)
    CPU #1 / Core #1 47 C (117 F)
    CPU #1 / Core #2 56 C (133 F)
    GPU1: GPU Diode (DispIO) 49 C (120 F)
    GPU1: GPU Diode (MemIO) 60 C (140 F)
    GPU1: GPU Diode (Shader) 56 C (133 F)
    GPU1: GPU VRM 57 C (135 F)
    GPU2: GPU Diode (DispIO) 43 C (109 F)
    GPU2: GPU Diode (MemIO) 42 C (108 F)
    GPU2: GPU Diode (Shader) 43 C (109 F)
    GPU2: GPU VRM 49 C (120 F)
    WDC WD5000AAKS-65YGA0 37 C (99 F)

    thanks a lot for you SUPER DUPER HUGEEEEEEEEEEEEE HELP!!!!!!!
    :D <3

    EDIT: ROFLMAOOOO!!! XDD passed1 test out of 5 in intel burn :P
    going to last good settings.
    EDIT2:
    ok im back to my last settings on 3.2 ghz:

    DRAM
    DRAM Voltage ……....1.800V............: 2.0
    CPU Vcore….……….........................:1.325
    high and lower later. Will be .6 less in windows

    CPU Termination…..... 1.200V*.......: <<< 1.34
    CPU PLL…………………....1.500V*.......: <<< 1.57
    CPU Referen.…………....0.873*.......: <<< .64% Of Vtt (Termination above)
    MCH Core…………….....1.100V...........: << 1.26

    same timings(not advanced)
    Static tRead Value.........................:7 on both
    tRRD...........................................4
    tWTR..........................................5
    tWR............................................5
    tRFC...........................................56
    tRTP...........................................5(o r 4)
    Command Rate (CMD) ....................:2
    so what's next? :P
    maybe i need more voltage?
    Last edited by Dweirdo; 10-12-2008 at 10:25 PM.

  2. #32
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ep45-DS3R with E7300 need serious help :<

    Page 3 reply >>>

    Yes, you have to have things on manual to change them.

    Ahh, I was just kidding about sending me the ram, as you would have none to use during the time I had it for testing.

    Ya, Ebay is always a great place to look for sure especially if you cannot find something in your country. If you do need help locating some mushkins on ebay that will ship to you let me know and I will link you to some

    Ya, I often wish I could stop by peoples houses and help, this would get them going much smoother and quicker. There is so many things I can change quickly per system to get things going that you just cannot explain to a user to try without being there and doing it in person


    Page 4 reply >>>

    Temps look good for your first part. Nice to see you noticed those settings not being in Auto, they can be manually set but it is a per speed/ram/system thing and I cannot advise people on what it best so I dont. It only help in benchmark performance tests and not stability so Auto is best for telling a user to use, once you are stable though you can save that BIOS profile (F11 on main page is save, F12 is load) and then you can start testing different values to see which is best for your system

    Not sure what to advise since you did not post your full settings you had that you used for 3.x that failed. Please post me the full settings you were trying that failed and I will advise you.

    But yeah, you may just have needed more voltage

  3. #33

    Default Re: Ep45-DS3R with E7300 need serious help :<

    wow didnt know about the save thing in bios, good to know. ok these were my full settings:

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3.618


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 402Mhz
    PCI Express Frequency (Mhz) .........:Set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<0
    MCH Clock Skew (ps)...................: <<<0(WOOOOOOOOOOOPPS MISSED THIS ONE OOPS!!!, I NEED TO CHANGE IT TO 150 DONT I ?missed it from the settings u've posted,i need to buy glasses xD)

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [400]
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ..............: 804
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................18

    Set all highest below first then lower later

    Advanced Timing Control
    tRRD...........................................5 those are not precise, i dont remember it good,it's something in the area)
    Advanced Timing Control
    tRRD...........................................5
    tWTR..........................................12
    tWR............................................14
    tRFC...........................................68
    tRTP...........................................6
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................ 1066

    Channel A
    Static tRead Value.........................:10\11
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:10\11(atm using 7 for 3.2 same for the last one)
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.4 BSOD instantly before windows loading, and 1.425 got to windows and BSOD.

    CPU Termination…..... 1.200V*.......: <<< 1.32
    CPU PLL…………………....1.500V*.......: <<< 1.57
    CPU Referen.…………....0.755V*.......: <<< again i only have 1 of the refference so i did it on 0.873 i think or 1 lower, 0.86*.
    CPU Reference2………,,0.800V*.......:<<< maybe i need to do ctrl+f1 as i've seen in one of the stickies you wrote.

    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.3 tried lower as well
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 2.0

    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

    so is the thing that i forgot about mch skew, such critical that it gave me BSOD?
    is more voltage is overkill, cause i heard that over 1.45 for a 45nm is 2 much.
    and maybe i need to put DRAM on 2.1 but im afraid it will burn :<
    ok im waiting thrilled to your settings :D
    thank you again.
    Daniel.
    edit:
    going to sleep now >< time diff is annoying , when i sleep ur awake and opposite,
    first thing in the morning , is check your settings and try them!
    Last edited by Dweirdo; 10-13-2008 at 06:06 AM.

  4. #34

    Default Re: Ep45-DS3R with E7300 need serious help :<

    bbbbumpiiiiiiiiiiiiiii

  5. #35

    Default Re: Ep45-DS3R with E7300 need serious help :<

    DAMNNNNNNNNNN THAT'S SO IDIOTIC AFTER TRYING SETTINGS FOR 3.6 WITH BSODS, I TRIED TO LOAD MY LAST SAVED BIOS(STABLE at 3.2) AND IT DIDNT BOOT!!! AND I WAS RUN NING THIS SETTINGS FOR 2 DAYS NO, WITH NO ERRORS,and suddenly after trying other settings, with FAIL, i cant load the settings i saved :S.
    weird isn't it ?
    this settings i've tried for 3.6(first static,mch latch, cores, i've seen it's able to boot, and changed all other stuff)

    B Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3.6


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 40Mhz
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<0
    MCH Clock Skew (ps)...................: <<<200

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [400]
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5\5\4
    tRCD .........................................6\5\4
    tRP'...........................................6\5 \4
    tRAS..........................................18\1 8\13

    Set all highest below first then lower later


    Advanced Timing Control
    tRRD...........................................5
    tWTR..........................................12
    tWR............................................14
    tRFC...........................................68
    tRTP...........................................6
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................ 1066

    Channel A
    Static tRead Value.........................:10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.4 BSOD instantly before windows loading, and 1.425 got to windows and BSOD,1.45 windows,ORTHOS, error in 5 sec of orthos.

    CPU Termination…..... 1.200V*.......: <<< 1.32
    CPU PLL…………………....1.500V*.......: <<< auto
    CPU Referen.…………....0.755V*.......: <<< again i only have 1 of the refference so i did it on 0.873.
    CPU Reference2………,,0.800V*.......:<<< maybe i need to do ctrl+f1 as i've seen in one of the stickies you wrote. tried ctrl+f1 still can't see reference 2.

    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.3 tried lower as well\1.24\auto
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 2.1\2.1\2.1

    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    save me here XD
    edit:
    Since i'm now back to default cause of my stupid pc, i will post some pictures of everest benchiz, and some tabs from cpu-z and memset.
    http://img82.imageshack.us/my.php?im...dmeasapfm3.jpg
    EDIT 2:
    ok fixed the problem of not booting.
    where have u been lately? :D
    anyways im atm trying settings for 3.33, with 4-4-4-12 at 2.12bios (2.1 everest))
    intel burn test(it failed on 1.35 vcore) trying 1.375 now, after that ill run memtest if it fails.ill post when i finish.
    Last edited by Dweirdo; 10-13-2008 at 08:46 PM.

  6. #36

    Default Re: Ep45-DS3R with E7300 need serious help :<

    alright, tested memory in memtest test 5 and 2, for about an hour, no errors :S.
    so apperently what caused the instability is or my faulty mobo or the voltages, but i used 1.45 for 3.33 GHZ!!! while other ppl dont even bump the voltage!! wTF?!!
    im going to replace my mobo tomorrow if i got no other ideas(my excuse for changing will be that one of the ethernet holes doesn't work, i mean one one i plug into him, it becomes green lightened and abit orange, and the other one, doesnt do anything, and just doesnt work! drivers installed, inf installed, chipset everything is installed, so i can get it replaced ^^).

  7. #37
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ep45-DS3R with E7300 need serious help :<

    When you load a profile, like your 3.2 one it may change the Strap, so you have to always check the memory multiplier. That is likely why it would not boot, it was on Auto because of the change over and set your ram freq too high.

    Sorry, I was sick last night. So where are you at as of now?

    About your ethernet, you have to enable both in the BIOS. And you need two seperate lines to run both

    1.45 is a bit much, like you said. Sounds like you have something else off. Post what settings you are using now

  8. #38

    Default Re: Ep45-DS3R with E7300 need serious help :<

    waaa i hope u feel better!!
    i think u should drop PC for feew dies, not good after being sick.
    yeah i needed to change the strap, every thing is fine but, i cant handle 3.33ghz :S
    fails so fast in orthos :<
    couldnt run it with this settings:

    B Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 10
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3.33


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<0
    MCH Clock Skew (ps)...................: <<<200\150

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [333]
    System Memory Multiplier ..............: 2.40B
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5\5\4
    tRCD .........................................6\5\4
    tRP'...........................................6\5 \4
    tRAS..........................................18\1 8\12

    Set all highest below first then lower later


    Advanced Timing Control
    tRRD...........................................5
    tWTR..........................................6
    tWR............................................6
    tRFC 62
    tRTP...........................................6
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................ 1066\800

    Channel A
    Static tRead Value.........................:10\9
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:10\9
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.35 fails orthos, 1.375 fails as well and in intelburn test it passes 1 of 5,didnt try higher V.
    CPU Termination…..... 1.200V*.......: <<< 1.32
    CPU PLL…………………....1.500V*.......: <<< auto
    CPU Referen.…………....0.755V*.......: <<< 0.873

    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.3 tried lower as well\1.24\1.16\1.26
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 2.1\2.1\2.1

    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    and the 3.6 is BSOD for everything, except 1.45 when it fails orthos in 5 sec xD or BSOD i dont remember, catch up for my previous posts please so u can tell me what's wrong :S
    thanks alot and feel better :D(ITS THE LSD!!! STOP THE LSD!!!)
    bytheway,
    http://www.omgili.com/newsgroups/alt...tml&q=oc+e7300

    it says here he got 3.33 with vcore default :SSSS
    EDIT 2:
    maybe im not sure i got it stable on 3.30GHZ! maybe because it was strap 333 and FSB 333 as well, so now its on 330 on very loose timings,checking stability in LinX, time elpased 3 minutes, damn error XD

    i think i got it stable at 3.3ghz 400 MCH LATCH ,1.3 MCH VCORE,
    2.0D,1.3815 VCORE, MCH SKEW 100PS. :S 2 high vcore IMO.
    will try later at higher FSB.
    Last edited by Dweirdo; 10-14-2008 at 01:27 AM.

  9. #39
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ep45-DS3R with E7300 need serious help :<

    The main thing you need to know before you run orthos/burntest is, is your ram settings memtest86+ stable? If not orthos testing is of no use. You need your ram stable first

    Here, try this >>>

    Code:
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 10
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3.33
    
    
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<0
    MCH Clock Skew (ps)...................: <<<0
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [333]
    System Memory Multiplier ..............: 2.40
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15
    
    Set all highest below first then lower later
    
    
    Advanced Timing Control
    tRRD...........................................3
    tWTR..........................................11
    tWR............................................6
    tRFC..........................................56
    tRTP...........................................3
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................ 1066
    
    Channel A
    Static tRead Value.........................:8
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    
    Channel B
    Static tRead Value.........................:8
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.34-1.36
    CPU Termination…..... 1.200V*.......: <<< 1.24
    CPU PLL…………………....1.500V*.......: <<< 1.5
    CPU Referen.…………....0.755V*.......: <<< 0.873
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 1..24
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< 1.55
    ICH Core…………...……1.100V............: <<< 1.2
    
    DRAM
    DRAM Voltage ……....1.800V............: 2.1
    
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

  10. #40

    Default Re: Ep45-DS3R with E7300 need serious help :<

    Quote Originally Posted by Lsdmeasap View Post
    The main thing you need to know before you run orthos/burntest is, is your ram settings memtest86+ stable? If not orthos testing is of no use. You need your ram stable first

    Here, try this >>>

    Code:
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 10
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3.33
    
    
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<0
    MCH Clock Skew (ps)...................: <<<0
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [333]
    System Memory Multiplier ..............: 2.40
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15
    
    Set all highest below first then lower later
    
    
    Advanced Timing Control
    tRRD...........................................3
    tWTR..........................................11
    tWR............................................6
    tRFC..........................................56
    tRTP...........................................3
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................ 1066
    
    Channel A
    Static tRead Value.........................:8
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    
    Channel B
    Static tRead Value.........................:8
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    
    Motherboard Voltage Control
    Voltage Type.... Manual
    CPU
    CPU Vcore..........................:1.34-1.36
    CPU Termination..... 1.200V*.......: <<< 1.24
    CPU PLL....1.500V*.......: <<< 1.5
    CPU Referen.....0.755V*.......: <<< 0.873
    
    MCH/ICH
    MCH Core.....1.100V...........: << 1..24
    MCH Reference..0.800V...........; <<< Leave
    MCH/DRAM Ref.......0.900V...........: <<< Leave
    ICH I/O.....1.550V............: <<< 1.55
    ICH Core...1.100V............: <<< 1.2
    
    DRAM
    DRAM Voltage ....1.800V............: 2.1
    
    DRAM Termination .0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    aight, im stable at 1.3815 3.3ghz, going to try ur settings so i can get further(with saving these i using atm)
    thx alot.

Page 4 of 15 FirstFirst ... 2345614 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •