Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: Antec 300 Power led front panel connection

  1. #1
    Join Date
    Oct 2008
    Beverly, MA

    Question Antec 300 Power led front panel connection

    This is my first post. I have a GA-P35-DS3L MB installed in an Antec 300 case and have question about connecting the power led connector. The MB has a 3 pin Power LED connection (not shown in manual) and 2 pin Message/Power/Sleep LED connection. The Antec case came with only a 3 pin connector. Right now power light glows steady. When I exit in standby mode the light does not blink and I can't active the system with mouse or KB. Does anyone now if it's possible to convert 3 pin connector to 2 pin connector. I recently built a system with an Asus MB and had just the opposite problem. Why can't case manufacturers and MB manufacturers get it right? Thanks for any help.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    PCB Island

    Default Re: Antec 300 Power led front panel connection

    Mouse or keyboard must be set in the BIOS to wake your system, and may need to be PS/2

    Where do you have it plugged in now? You can use the 3 pin header, you just have to be sure the wiring matches up

    The Light will only blink for S1 sleep, not S3 as well.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts