Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Thread: Ga-ep31-ds3l need help here!!!




  1. #1
    Join Date
    Oct 2008
    Posts
    15

    Default Ga-ep31-ds3l need help here!!!

    im currently running 4ghz e5200 with this mobo,unlucky not stable,too hotss temp!

    here my spec:-

    GA-EP31-DS3L
    E5200@2.5ghz~4ghz
    2*2gb cm2x2048-6400c5 corsair
    Asus EN8800GT 512mb
    Big water 850i cooling system

    Do you guys can help me???how to make it stable or the right setting in bios such as cpu voltage and Ram timing setting.

    need the best tweak!
    tanx

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ga-ep31-ds3l need help here!!!

    Please post what you are using now, and I will post back some settings. Do you have a good cooler?

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8] 
    Fine Clock Ratio ____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450] 
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    
    Performance Enhance = [Standard]
    
    CAS Latency Time________________ ?
    Dram RAS# to CAS# Delay_________ ?
    Dram RAS# Precharge Delay_______?
    Precharge Delay (tRAS)__________ ?
    
    ACT to ACT Delay (tRRD)_________ ?
    Rank Write to READ Delay________ ?
    Write to Precharge Delay_________ ?
    Refresh to ACT Delay______________ ?
    Read to Precharge Delay__________ ?
    Static tRead Value_______________ 1-31
    Static tRead Phase Adjust________ [Auto]
    
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] 
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.1V] 
    CPU Voltage Control_______ [1.25]
    
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]
    
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB

  3. #3
    Join Date
    Oct 2008
    Posts
    15

    Talking Re: Ga-ep31-ds3l need help here!!!

    here is the M.I.T bios setting,btw ill never change the other option by press CTRL+F1, so can u help me bro setup this to the right setting





    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [12]
    Fine Clock Ratio ____________[+0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    memory frequency (mhz) 800 640
    Performance Enhance = [Standard]

    CAS Latency Time________________ auto
    Dram RAS# to CAS# Delay_________ auto
    Dram RAS# Precharge Delay_______ auto
    Precharge Delay (tRAS)__________ auto

    ACT to ACT Delay (tRRD)_________ auto
    Rank Write to READ Delay________ auto
    Write to Precharge Delay_________ auto
    Refresh to ACT Delay______________ auto
    Read to Precharge Delay__________ auto
    Static tRead Value_______________ auto
    Static tRead Phase Adjust________ [Auto]

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ Normal
    PCI-E OverVoltage Control_ Normal
    FSB OverVoltage Control___ Normal
    (G)MCH OverVoltage Control Normal
    CPU Voltage Control_______ [1.60000]

    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect___________________[Enabled] *Note* Must be enabled to flash from USB

  4. #4
    Join Date
    Oct 2008
    Posts
    15

    Default Re: Ga-ep31-ds3l need help here!!!

    im only got this **** thermaltake 850i Water cooling and some other 5 chasing fan,f i need 2 by a ram cooler i will get it to night hehehehe........

  5. #5
    Join Date
    Sep 2008
    Location
    Canberra, Australia
    Posts
    206

    Default Re: Ga-ep31-ds3l need help here!!!

    are you sure those settings you've got there are right... if they are, thats your problem... from what you've posted, you've got your CPU running in excess of 5.6GHz... either drop the multiplier or the FSB. Also your memory doesnt seem to equate either... try this for 4.1GHz

    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [12]
    Fine Clock Ratio ____________[+0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [333] <- 12.5x333=4162.5MHz
    PCI Express Frequency (Mhz)_______ [100] <- Make sure its 100MHz
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier_____ (SPD)__ [2.40]
    DRAM Timing Selectable_______ SPD __ [Manual]
    memory frequency (mhz)______ 800___ 800
    Performance Enhance = [Standard]

    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 5
    Dram RAS# Precharge Delay_______ 5
    Precharge Delay (tRAS)__________ 15

    ACT to ACT Delay (tRRD)_________ 4-8
    Rank Write to READ Delay________ 4-7
    Write to Precharge Delay_________ 3-7
    Refresh to ACT Delay______________ 52-58
    Read to Precharge Delay__________ 4-7
    Static tRead Value_______________ 8-11
    Static tRead Phase Adjust________ [Auto]

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ +0.2V (standard is 1.8V and i think those Corsairs run at 2-2.1V)
    PCI-E OverVoltage Control_ Normal
    FSB OverVoltage Control___ Normal
    (G)MCH OverVoltage Control +0.1-0.2V
    CPU Voltage Control_______ [1.3750] <- try starting here... you might need to go up or down

    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect___________________[Enabled] <- unless you have an external USB HDD

    when setting your timings, start loose and get tighter if you can boot
    Last edited by BongWizard; 10-11-2008 at 03:59 PM.
    NZXT Lexa BlackLine Case with Red LEDs
    Corsair TX-750 Modular PSU
    Gigabyte EP45-DS3P (BIOS F7)
    Intel Core 2 Quad Q9300 @ 3.73GHz (downclocked for the summer )
    OCZ Vendetta 2 CPU Heatsink
    2x 2GB Kingston HyperX RAM PC2-6400 @ 996MHz (4-5-5-15)
    3x Seagate Barracuda 7200.11 500GB HDD in RAID5
    2x HIS Radeon HD 4850 @ 745/1090 in CrossFireX
    2x ThermalTake DuOrb GPU Heatsink
    D-Link Super G PCI WLAN Adapter
    Asus Lightscribe 20x SATA II DVD-DL Burner
    Creative X-Fi XtremeGamer Fatal1ty Pro
    2x 22" LG W2252TQ-PF Widescreen LCD Monitor (YAY!! Finally got the second one!!)

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ga-ep31-ds3l need help here!!!

    Please fill that table in with YOUR Settings, all of them exactly and I can help. What you have there now is 5.4Ghz so it cannot be correct


    And PLEASE Lower your CPU voltage for sure before you kill your CPU

  7. #7
    Join Date
    Oct 2008
    Posts
    15

    Default Re: Ga-ep31-ds3l need help here!!!

    sorry bro the cpu frequency is 320x12.5 = 4.0ghz

    btw im already test ur setting it only boot to windows with high cpu voltage =1,60000

  8. #8
    Join Date
    Sep 2008
    Location
    Canberra, Australia
    Posts
    206

    Default Re: Ga-ep31-ds3l need help here!!!

    how hot does your chip run if you boot to windows with 1.6V on the core? just seems a bit high to me... most people dont raise the voltage on that chip past maybe 1.45V
    NZXT Lexa BlackLine Case with Red LEDs
    Corsair TX-750 Modular PSU
    Gigabyte EP45-DS3P (BIOS F7)
    Intel Core 2 Quad Q9300 @ 3.73GHz (downclocked for the summer )
    OCZ Vendetta 2 CPU Heatsink
    2x 2GB Kingston HyperX RAM PC2-6400 @ 996MHz (4-5-5-15)
    3x Seagate Barracuda 7200.11 500GB HDD in RAID5
    2x HIS Radeon HD 4850 @ 745/1090 in CrossFireX
    2x ThermalTake DuOrb GPU Heatsink
    D-Link Super G PCI WLAN Adapter
    Asus Lightscribe 20x SATA II DVD-DL Burner
    Creative X-Fi XtremeGamer Fatal1ty Pro
    2x 22" LG W2252TQ-PF Widescreen LCD Monitor (YAY!! Finally got the second one!!)

  9. #9
    Join Date
    Oct 2008
    Posts
    15

    Default Re: Ga-ep31-ds3l need help here!!!

    but it wont boot up with 1.45v ill try set step by step until it raise up to 1.6
    then it load to windows

  10. #10
    Join Date
    Oct 2008
    Posts
    15

    Default Re: Ga-ep31-ds3l need help here!!!

    idle:-
    system temp 30c
    core #0 38c
    core #1 49c




    load:-
    system temp 38c
    core #0 49c
    core #1 59c

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •