Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 36

Thread: GA-EP45-DS3R (e7200)




  1. #11

    Default Re: GA-EP45-DS3R (e7200)

    laker faker, im with you on this, E7300 with with Ep45-DS3R, only 3.2 got stable, cant get it over it, either we both have bad chips, or we both nabz, or those motherboard with this cpu is not good XD

  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-DS3R (e7200)

    Ya, what you set in the BIOS for CPU voltage will be about .6 or so different in windows because of vdrop, and Less then that at full load. So you may need far more then you are trying, but likely not for only 3.4 or so

    What is your full settings you are using now that is stable?

  3. #13
    Join Date
    Oct 2008
    Location
    Trnava, Slovakia
    Posts
    18

    Default Re: GA-EP45-DS3R (e7200)

    ok so after few other hours of trying, i was stable on 3,5 Ghz, then i tryed ,6 it wasnt stable so i went back to 3,5 and it wasnt stable anymore on same setup, 3,3 wasnt stabel too, i realy dont understand it, i setup it 100% same and one time stable one time not, WTF???
    now im on 3,1 and i will cechk in night if its stable
    my setings atm:

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............:
    CPU Clock Ratio ..........................:
    Fine CPU Clock Ratio.....................:.9
    CPU Frequency ...........................: 0.5


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333 Mhz
    PCI Express Frequency (Mhz) .........:Auto (i know..)

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 900
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)...................: 0


    DRAM Performance Control
    Performance Enhance...................: [Turbo]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.00
    Memory Frequency (Mhz) ..............: 667
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................18

    Advanced Timing Control
    tRRD...........................................aut o
    tWTR..........................................auto
    tWR............................................aut o
    tRFC...........................................60
    tRTP...........................................aut o
    Command Rate (CMD) ....................:2auto

    Driving Strength Profiles
    Driving Strength ............................

    Channel A
    Static tRead Value.........................:auto
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:auto
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.35
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: <<< Leave
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above)
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above)

    MCH/ICH
    MCH Core…………….....1.100V...........: <<
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............:
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

  4. #14
    Join Date
    Oct 2008
    Location
    Trnava, Slovakia
    Posts
    18

    Default Re: GA-EP45-DS3R (e7200)

    Ok so after 3 mins in OCCT critical CPU temperature, on 3,16 Ghz with AC Freezing Pro 7, 69 C. Great. I can change to emo and jump from window:)
    Edit:
    I setup max temperature in test to 75 so i will tell you results at the morning.
    After 20 min max temperature was 70
    Last edited by laker_faker; 10-13-2008 at 08:18 AM.

  5. #15

    Default Re: GA-EP45-DS3R (e7200)

    dude, this temps are huge!!
    You are using 1.29v (bios 1.35) this is so weird, is this new pc? u should clean some dirt.

  6. #16
    Join Date
    Oct 2008
    Location
    Trnava, Slovakia
    Posts
    18

    Default Re: GA-EP45-DS3R (e7200)

    Quote Originally Posted by Dweirdo View Post
    dude, this temps are huge!!
    You are using 1.29v (bios 1.35) this is so weird, is this new pc? u should clean some dirt.
    Its new PC, its clean, with good cooler, so i dont know where is problem:/

  7. #17
    Join Date
    Sep 2008
    Location
    Canberra, Australia
    Posts
    206

    Default Re: GA-EP45-DS3R (e7200)

    Quote Originally Posted by laker_faker View Post
    Its new PC, its clean, with good cooler, so i dont know where is problem:/
    did you apply the thermal paste properly? that's usually the reason for high temps when you've got a decent cooler on the CPU... also, you can probably lower the vcore to 1.3V (you really dont need 1.35 when you're at 3.16GHz) and if you can get stable at that voltage you should get much better temps...

    next thing i gotta point out is Memory Performance Enhance should always be STANDARD when OCing and set your Static tRead to around 8-11.

    but really man if you're getting those kinda temps at stock settings and voltages then you have something physically wrong with your setup... make sure your cooler is seated properly and that you dont have a massive cake of thermal paste on your chip... thermal paste is only to fill tiny gaps which arise from an imperfect finish on the cooler base, the layer should be absolutely tiny, less than paper thin
    NZXT Lexa BlackLine Case with Red LEDs
    Corsair TX-750 Modular PSU
    Gigabyte EP45-DS3P (BIOS F7)
    Intel Core 2 Quad Q9300 @ 3.73GHz (downclocked for the summer )
    OCZ Vendetta 2 CPU Heatsink
    2x 2GB Kingston HyperX RAM PC2-6400 @ 996MHz (4-5-5-15)
    3x Seagate Barracuda 7200.11 500GB HDD in RAID5
    2x HIS Radeon HD 4850 @ 745/1090 in CrossFireX
    2x ThermalTake DuOrb GPU Heatsink
    D-Link Super G PCI WLAN Adapter
    Asus Lightscribe 20x SATA II DVD-DL Burner
    Creative X-Fi XtremeGamer Fatal1ty Pro
    2x 22" LG W2252TQ-PF Widescreen LCD Monitor (YAY!! Finally got the second one!!)

  8. #18
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-DS3R (e7200)

    Memory Performance Enhance should always be STANDARD when OCing and set your Static tRead to around 8-11.
    For sure

    And please set PCI Express to 100, DO IT and stop messing around

    You have to set your ram voltage to 2.0-2.1, and add some MCH Voltages

    You should also be using the 333 MCH Strap, with 7-8 Static tRead. After 400 FSB use 400 MCH strap and 8-10 Static Tread.

    Sounds like you are jumping around FAR too much, and not taking advantage of BIOS profiles. Save on the main Screen of the BIOS if F11, Load is F12

  9. #19
    Join Date
    Oct 2008
    Location
    Trnava, Slovakia
    Posts
    18

    Default Re: GA-EP45-DS3R (e7200)

    Quote Originally Posted by BongWizard View Post
    did you apply the thermal paste properly? that's usually the reason for high temps when you've got a decent cooler on the CPU... also, you can probably lower the vcore to 1.3V (you really dont need 1.35 when you're at 3.16GHz) and if you can get stable at that voltage you should get much better temps...

    next thing i gotta point out is Memory Performance Enhance should always be STANDARD when OCing and set your Static tRead to around 8-11.

    but really man if you're getting those kinda temps at stock settings and voltages then you have something physically wrong with your setup... make sure your cooler is seated properly and that you dont have a massive cake of thermal paste on your chip... thermal paste is only to fill tiny gaps which arise from an imperfect finish on the cooler base, the layer should be absolutely tiny, less than paper thin

    Today i bought new thermal paste and use it, just tiny layer. Cooler is 100% correct setuped. i have front and back 120 mm fan so i raly dont know. maybe temperature indicators on motherboard are wrong, tomorrow i will test it with my hand, how hot is it:P

  10. #20
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-DS3R (e7200)

    Do you maybe have your fans set to low for your cooler, or pointed wrong? What speeds do these fans run, and how are you controlling them?

Page 2 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •