Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 31

Thread: Help with Ram Timings!




  1. #11
    Join Date
    Sep 2008
    Location
    Sweden
    Posts
    65

    Default Re: Help with Ram Timings!

    Havent start played with it yet but will post how it went ASAP when im finished!

    Nice your mobo is working great and looking forward to your review :)
    Last edited by MaxFX; 10-14-2008 at 01:01 AM.

  2. #12
    Join Date
    Sep 2008
    Location
    Sweden
    Posts
    65

    Default Re: Help with Ram Timings!

    Now I have played with the Advanced Timings and it seems I can have it stable at all this low values, it's totaly awsome

    trrd = 3
    twtr = 3
    twr = 3
    trfc = 46
    trtp = 3
    cmd = 2

    I have checked it in Memtest+ with test 2 and 5, each passed over 40 passes so I guess I can call it stable and will now test it with OCCT blend 2 hour default, if that will pass then I should defenitly be all set I think!

    Thanks for ya help :)

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help with Ram Timings!

    Looks good! You may want to bench with twr a bit higher and see if it being that low causes a performance hit

  4. #14
    Join Date
    Sep 2008
    Location
    Sweden
    Posts
    65

    Default Re: Help with Ram Timings!

    Have now run OCCT 2 hour blend and it's stable as a rock, im impressed that I can have all the timings this tight, must be very very good this OZC memory :)

    Yepp I have actually benched with different values with twr and the other timings but it dident gave me any performance hit at all so it's all good then and I know everything is optimized with my comp so a big THANKS to you and everywon on this great site :)
    Last edited by MaxFX; 10-15-2008 at 12:50 AM.

  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  6. #16
    Join Date
    Sep 2008
    Location
    Sweden
    Posts
    65

    Default Re: Help with Ram Timings!

    Hello again!

    Couldent resist to try tweak em some more and now it's the absolute maximum I can push them, I think you may be impressed as I cant believe I can have the timings this tight. how come it's even possible it's totaly freaking awsome :)

    trrd = 2
    twtr = 2
    twtr = 3
    trfc = 46
    trtp = 2
    cmd = 2

    So you see I manage to set the trrd, twtr and trtp to the low value of 2, amazing dont you think :)

    It's all stable in Prime95 blend over 8 hour and over 50 passes each on Memtest+ 2 and test 5!

  7. #17
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help with Ram Timings!

    Nice, Very nice timings. Ya, I am surprised that is prime/memtest stable. You have some nice chips in that ram sounds like

  8. #18
    Join Date
    Sep 2008
    Location
    Sweden
    Posts
    65

    Default Re: Help with Ram Timings!

    Yepp must be very good chips in my ram thanks!
    And even the copy bench went up in Everest, now over 8300Mb

    BTW, is it usual that the values in Everest is different ?
    Sometimes i's a difference of 100mb or so. I guess it's works that way ?

  9. #19
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help with Ram Timings!

    Ya, that is normal since usually no matter what you do different services are using the ram at different times so tests will always vary a bit each time.

    That is good copy for 6400 Ram, what speed are you running everything at now?

  10. #20
    Join Date
    Sep 2008
    Location
    Sweden
    Posts
    65

    Default Re: Help with Ram Timings!

    I figured so and when I bench right after each other it's allways different values as you say but thats okey then, just wanted to be sure :)

    Feels nice to get so much out of my ram thanks to you mate I have learned a lot about O/C and Tweaking

    My final settings with my Q6600-G0 and OCZ PC2 6400 800Mhz Reaper 2*2GB on P45-DS3R!


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 8
    Fine CPU Clock Ratio.....................: 0
    CPU Frequency ...........................: 3.4Ghz (425*8

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 425 Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    C.I.A.2 .................................:[Disabled]

    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 400 Mhz
    System Memory Multiplier ..............: 2D
    Memory Frequency (Mhz) ..............: 850
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................ 4
    tRCD ......................................... 4
    tRP'............................................ 4
    tRAS.......................................... 12

    Advanced Timing Control
    tRRD........................................... 2
    tWTR.......................................... 2
    tWR............................................ 3
    tRFC........................................... 46
    tRTP........................................... 2
    Command Rate (CMD) ....................: 2

    Channel A
    Static tRead Value.........................: 8
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................: 8
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.46250
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: <<< Leave
    CPU Referen.…………....0.755V*.......: <<< Leave
    CPU Reference2………,,0.800V*.......:<<< Leave

    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.300
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 2.1
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]<!-- / message -->
    Last edited by MaxFX; 10-21-2008 at 01:39 AM.

Page 2 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •