Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 10 FirstFirst 12345 ... LastLast
Results 21 to 30 of 91

Thread: GA-EP45-DS5+Q9550+CorsairDominator 2x2Gb




  1. #21
    Join Date
    Oct 2008
    Posts
    21

    Default Re: GA-EP45-DS5+Q9550+CorsairDominator 2x2Gb

    Wow I'm running @3,6Ghz :)

    This is the settings


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio ..........................: 8
    Fine CPU Clock Ratio.....................: 0.5
    CPU Frequency ...........................: 3.60GHz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 424MHz
    PCI Express Frequency (Mhz) .........: 100MHz

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 900
    CPU Clock Skew (ps)....................: 50
    MCH Clock Skew (ps)...................: 100


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 333 or 400MHz
    System Memory Multiplier ..............: 2.40
    Memory Frequency (Mhz) ..............: 1017MHz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.............................5
    tRCD ..............................................5
    tRP'.............................................. ...5
    tRAS.............................................. ..18

    Advanced Timing Control
    tRRD........................................... 6
    tWTR.......................................... 8
    tWR............................................ 7
    tRFC........................................... 62
    tRTP........................................... 6
    Command Rate (CMD) ....................: 2

    Channel A
    Static tRead Value............................: 11
    tRD Phase0 Adjustment...................: Auto
    tRD Phase1 Adjustment...................: Auto
    tRD Phase2 Adjustment .................: Auto
    tRD Phase3 Adjustment..................: Auto
    Trd2rd(Different Rank)....................: Auto
    Twr2wr(Different Rank)...................: Auto
    Twr2rd(Different Rank)...................: Auto
    Trd2wr(Same/Diff Rank)..................: Auto
    Dimm1 Clock Skew Control...............: Auto
    Dimm2 Clock Skew Control...............: Auto

    Channel B
    Static tRead Value..........................: 11
    tRD Phase0 Adjustment...................: Auto
    tRD Phase1 Adjustment...................: Auto
    tRD Phase2 Adjustment .................: Auto
    tRD Phase3 Adjustment..................: Auto
    Trd2rd(Different Rank)....................: Auto
    Twr2wr(Different Rank)...................: Auto
    Twr2rd(Different Rank)...................: Auto
    Trd2wr(Same/Diff Rank)..................: Auto
    Dimm1 Clock Skew Control...............: Auto
    Dimm2 Clock Skew Control...............: Auto

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: [Auto]
    CPU Termination…..... 1.200V*.......: Auto
    CPU PLL…………………....1.500V*.......: Auto
    CPU Referen.…………....0.755V*.......: Auto
    CPU Reference2………..0.800V*.......: Auto

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.2-
    MCH Reference….…….0.800V...........: Auto
    MCH/DRAM Ref.…......0.900V...........: Auto
    ICH I/O……………….....1.550V............: Auto
    ICH Core…………...……1.100V............: Auto

    DRAM
    DRAM Voltage ……....1.800V............: 2.1V

    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

    What can I optimize and in what order?

    thx masters! :D

    g

  2. #22

    Default Re: GA-EP45-DS5+Q9550+CorsairDominator 2x2Gb

    i think u can lower ur static to like 9
    Static tRead Value............................: 9 for both.
    am not sure so wait for LSD.

  3. #23
    Join Date
    Oct 2008
    Posts
    21

    Default Re: GA-EP45-DS5+Q9550+CorsairDominator 2x2Gb

    Thx for the advice Dweirdo :) Yes I'm waiting for the great Lsdmeasap, my (and not only) Guru ;-)

    g

  4. #24
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-DS5+Q9550+CorsairDominator 2x2Gb

    Ya, Static tRead Value can come down. Is this Memtest86+ stable as of now? Just wanted to be sure you did not need more MCH voltage before you start lowering things.

    (G)MCH Frequency Latch...............: 333 or 400MHz (What are you using here?) 400 May be more stable but 333 will perform better. And 333 will need looser timings, so it is up to you and your tests which you use. And you may actually need to run 400 MCH with your FSB and choosen ram speeds to be stable

    System Memory Multiplier ..............: 2.40
    Memory Frequency (Mhz) ..............: 1017MHz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.............................5
    tRCD ..............................................5
    tRP'.............................................. ...5
    tRAS.............................................. ..18 << Can try 15

    Advanced Timing Control
    tRRD........................................... 6 (3-5)
    tWTR.......................................... 8 (2-5)
    tWR............................................ 7 (4-6)
    tRFC........................................... 62 (48-58)
    tRTP........................................... 6 (2-5)
    Command Rate (CMD) ....................: 2

    Channel A
    Static tRead Value............................: 11 (333 MCH Strap can use 7-8) (400 MCH Will need 9+)

    tRD Phase0 Adjustment...................: Auto
    tRD Phase1 Adjustment...................: Auto
    tRD Phase2 Adjustment .................: Auto
    tRD Phase3 Adjustment..................: Auto
    Trd2rd(Different Rank)....................: Auto
    Twr2wr(Different Rank)...................: Auto
    Twr2rd(Different Rank)...................: Auto
    Trd2wr(Same/Diff Rank)..................: Auto
    Dimm1 Clock Skew Control...............: Auto
    Dimm2 Clock Skew Control...............: Auto

    Channel B
    Static tRead Value..........................: (333 MCH Strap can use 7-8) (400 MCH Will need 9+)

    tRD Phase0 Adjustment...................: Auto
    tRD Phase1 Adjustment...................: Auto
    tRD Phase2 Adjustment .................: Auto
    tRD Phase3 Adjustment..................: Auto
    Trd2rd(Different Rank)....................: Auto
    Twr2wr(Different Rank)...................: Auto
    Twr2rd(Different Rank)...................: Auto
    Trd2wr(Same/Diff Rank)..................: Auto
    Dimm1 Clock Skew Control...............: Auto
    Dimm2 Clock Skew Control...............: Auto

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: [Auto] << You should manually find what it best/stable. Auto is likely using way to much. What you set here will be about .6 or so less actual voltage applied.

    CPU Termination…..... 1.200V*.......: Auto << 1.2-1.35
    CPU PLL…………………....1.500V*.......: Auto << Please set to default you see
    CPU Referen.…………....0.755V*.......: Auto
    CPU Reference2………..0.800V*.......: Auto

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.2-1.3
    MCH Reference….…….0.800V...........: Auto
    MCH/DRAM Ref.…......0.900V...........: Auto
    ICH I/O……………….....1.550V............: Auto
    ICH Core…………...……1.100V............: Auto

    DRAM
    DRAM Voltage ……....1.800V............: 2.1V

    As for order to change... I would get your CPU voltages stable first, but if you want to leave it here is the order I would change things. Static tRead, Then trfc, then the rest

  5. #25
    Join Date
    Oct 2008
    Posts
    21

    Default Re: GA-EP45-DS5+Q9550+CorsairDominator 2x2Gb

    Quote Originally Posted by Lsdmeasap View Post
    Ya, Static tRead Value can come down. Is this Memtest86+ stable as of now? Just wanted to be sure you did not need more MCH voltage before you start lowering things.
    At this moment, Memtest86+ is error free :)

    (G)MCH Frequency Latch...............: 333 or 400MHz (What are you using here?)
    I using 333 Mhz (sorry for imprecision... )


    g

  6. #26
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-DS5+Q9550+CorsairDominator 2x2Gb

    Nice to hear it, just wondered about MCH. Nice to see 333 is working great for you, you may test lower then I posted for Static tRead as well if you like, 6 may work

  7. #27
    Join Date
    Oct 2008
    Posts
    21

    Default Re: GA-EP45-DS5+Q9550+CorsairDominator 2x2Gb

    I have rebuild my configuration like this:


    MB Intelligent Tweaker(M.I.T.)
    CPU Frequency ...........................: 3.60GHz


    Clock Chip Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 424MHz
    PCI Express Frequency (Mhz) .........: 100MHz
    C.I.A.2 .................................:[Disabled]

    Advanced Clock Control
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 900
    CPU Clock Skew (ps)....................: 50
    MCH Clock Skew (ps)...................: 100


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 333
    System Memory Multiplier ..............: 2.40
    Memory Frequency (Mhz) ..............: 1018 MHz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.............................5
    tRCD ..............................................5
    tRP'.............................................. ...5
    tRAS.............................................. ..15

    Advanced Timing Control
    tRRD........................................... 5
    tWTR.......................................... 5
    tWR............................................ 6
    tRFC........................................... 58
    tRTP........................................... 5
    Command Rate (CMD) ....................: 2

    Channel A
    Static tRead Value............................: 8


    Channel B
    Static tRead Value..........................: 8


    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….......1,250V..........: [Auto]
    CPU Termination…..... 1.200V.......: Auto
    CPU PLL…………………....1.500V.......: Auto
    CPU Referen.…………....0.760V.......: Auto
    CPU Reference2………..0.800V.......: Auto

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.2
    MCH Reference….…….0.760V...........: Auto
    MCH/DRAM Ref.…......0.900V...........: Auto
    ICH I/O……………….....1.500V............: Auto

    DRAM
    DRAM Voltage ……....1.800V............: 2.1V

    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto


    All values are exact like in my BIOS.
    My mem is stable, but the bench are slower than before...
    What's wrong?

    g

  8. #28
    Join Date
    Oct 2008
    Posts
    21

    Default Re: GA-EP45-DS5+Q9550+CorsairDominator 2x2Gb

    I have correct the value from 8 to 6 and the PC rebooted 3 times before start definitely... and the memory running slower than before... :O (230 vs. 309) Why?

    g

  9. #29
    Join Date
    Oct 2008
    Posts
    21

    Default Re: GA-EP45-DS5+Q9550+CorsairDominator 2x2Gb

    nothing.... under 8 the pc don't boot...
    8 is the first usable value.

    g

  10. #30
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-DS5+Q9550+CorsairDominator 2x2Gb

    Try this for a better score >>>

    CPU Clock Ratio ..........................: 8
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3600

    CPU Host Frequency (Mhz) ............: 450Mhz

    (G)MCH Frequency Latch...............: 400
    System Memory Multiplier ..............: 2.40
    Memory Frequency (Mhz) ..............: 900 MHz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.............................5
    tRCD ..............................................4/5
    tRP'.............................................. ...4/5
    tRAS.............................................. ..12

    Advanced Timing Control
    tRRD........................................... 3
    tWTR.......................................... 3
    tWR............................................ 6
    tRFC........................................... 54
    tRTP........................................... 3
    Command Rate (CMD) ....................: 2

    Channel A & B
    Static tRead Value............................: 8-9

Page 3 of 10 FirstFirst 12345 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •