Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 35

Thread: GA-X48T-DQ6 and OCZ ram = random BSoD?




  1. #11
    MDDI is offline Junior Member
    Join Date
    Jul 2008
    Location
    Florida USA
    Posts
    70

    Default Re: GA-X48T-DQ6 and OCZ ram = random BSoD?

    GA-X48T-DQ6 CPU Host Frequency

    4.00D is 400MHz

    4.00B is 333MHz

  2. #12
    MDDI is offline Junior Member
    Join Date
    Jul 2008
    Location
    Florida USA
    Posts
    70

    Default Re: GA-X48T-DQ6 and OCZ ram = random BSoD?

    Sorry about the quick answer.

    A = 266MHz
    B = 333MHZ
    C = 200MHZ
    D = 400MHz

    When you highlight System Memory Multiplier press enter. Scroll through the list. You can select the multi you wish followed by the letter (freq).

    Try 4.00B and see if you can POST.

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-X48T-DQ6 and OCZ ram = random BSoD?

    Yes try 4.00B then 4.00D but use the highest other settings for sure until you get going

  4. #14
    Join Date
    Oct 2008
    Posts
    11

    Default Re: GA-X48T-DQ6 and OCZ ram = random BSoD?

    Thanks a ton.
    Going to keep trying to get the system stable :).
    Will post back if I find a good combination.

  5. #15
    MDDI is offline Junior Member
    Join Date
    Jul 2008
    Location
    Florida USA
    Posts
    70

    Default Re: GA-X48T-DQ6 and OCZ ram = random BSoD?

    You mentioned at the beginning of this thread that you have PC3-1280.

    Then you mentioned that your RAM is 1333MHz.

    PC3-1280 is 1600MHz.

    Which do you have?

  6. #16
    Join Date
    Oct 2008
    Posts
    11

    Default Re: GA-X48T-DQ6 and OCZ ram = random BSoD?

    I have the PC3-12800, but they are running at 1333 mhz due to the Q9550 is running at that speed. If I understand it correctly.
    2 x OCZ XTC Platinum OCZ3P16002G

  7. #17
    MDDI is offline Junior Member
    Join Date
    Jul 2008
    Location
    Florida USA
    Posts
    70

    Default Re: GA-X48T-DQ6 and OCZ ram = random BSoD?

    That is correct. Did you try 4.00B?

  8. #18
    Join Date
    Oct 2008
    Posts
    11

    Default Re: GA-X48T-DQ6 and OCZ ram = random BSoD?

    That is what it's running at now.. But still not stable :|
    So far all the settings I have tried in the advanced section has caused the comp to do triple or quad boot ups and made BIOS go back the safety setup. Occationally with the characteristic memory error beeps.

  9. #19
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-X48T-DQ6 and OCZ ram = random BSoD?

    You may, once you get your setup stable, use a lower CPU Mutli so you can run your ram faster. But this will again require more tweaking so it is up to you. If you get stable at where you are trying now and want to leave it then do so. For sure save it as a BIOS profile once you do incase you change your mind sometime. F11 is save on the MAIN Page, and F12 is load

  10. #20
    MDDI is offline Junior Member
    Join Date
    Jul 2008
    Location
    Florida USA
    Posts
    70

    Default Re: GA-X48T-DQ6 and OCZ ram = random BSoD?

    Did you set the Advanced Timing to the higher numbers that LSD recommended?

    Is your CMD set 1T or 2T? Use 2T.

    Pay close attention to the overvoltage's and set as LSD suggested.

    RAM
    FSB
    PCIE
    MCH

Page 2 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •