Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 35

Thread: GA-P35-DS3L optimal settings




  1. #11
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35-DS3L optimal settings

    Yeap, all you can do know is overclock. You will have to loosen up your ram and tweak it back down again later after you are done though. Just keep that in mind

  2. #12
    Join Date
    Oct 2008
    Posts
    20

    Default Re: GA-P35-DS3L optimal settings

    Sorry bout the questions that keep coming, but the sticky says i need to put a fan over the mch, how to do i find the Memory Controller Hub on the GA-P35-DS3L?
    GIGABYTE - GA-P35-DS3L (rev. 1.0)

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35-DS3L optimal settings

    You do not HAVE to do that, only if your NB is very hot. What it is incase you want to is the Northbridge heatsink under the CPU

  4. #14
    Join Date
    Oct 2008
    Posts
    20

    Default Re: GA-P35-DS3L optimal settings

    Hey do you mind helping me overclock my cpu? What do u think i should overclock too? I dont have a floppy, should i order one before i try this? This is where im at right now...


    GA-P35-DS3L f8 bios
    intel core 2 duo e6750
    Crucial Technology 2 GB PC2-6400 DDR2 RAM
    evga 8600GTS
    160 GB Western digital SATA Hard Drive

    Im lookin at core temp right now im at 28 and 33 C





    Robust Graphics Booster___________ [Fast]
    CPU Clock Ratio ____________ [8x]

    CPU Host Clock Control_ [disabled]
    CPU Host Frequency (MHz)__________ [333]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.40B]
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 4
    Dram RAS# to CAS# Delay_________ 4
    Dram RAS# Precharge Delay_______ 4
    Precharge Delay (tRAS)__________ 12


    ACT to ACT Delay (tRRD)_________ 3
    Rank Write to READ Delay________ 3
    Write to Precharge Delay_________ 3
    Refresh to ACT Delay______________ 38
    Read to Precharge Delay__________ 3
    Static tRead Value_______________ 6
    Static tRead Phase Adjust________ auto

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [0.2V]
    PCI-E OverVoltage Control_ [normal]
    FSB OverVoltage Control___ [+0.1V]
    (G)MCH OverVoltage Control [+0.1V]
    CPU Voltage Control_______ [normal]

    Limit CPUID Max. to 3.....................: disabled
    No-Execute Memory Protect............: enabled
    CPU Enhanced Halt (C1E)................: enabled
    CPU Thermal Monitor 2(TM2) ...........: enabled
    CPU EIST Function.........................: enabled
    Virtualization Technology................: disabled


    Do u you need any other info? Remember im really new to this stuff.

  5. #15
    Join Date
    Sep 2008
    Posts
    9

    Default Re: GA-P35-DS3L optimal settings

    Before you OC turn off all the energy saver and auto clock options in the BIOS.

  6. #16
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35-DS3L optimal settings

    Floppy can be a lifesaver and for $5-10 Everyone should have one installed, and set as first boot device

    Here try this for 3.4 >>>>

    Robust Graphics Booster___________ [Fast]
    CPU Clock Ratio ____________ [8x]

    CPU Host Clock Control_ [disabled]
    CPU Host Frequency (MHz)__________ [425]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00B]
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 4/5
    Dram RAS# to CAS# Delay_________ 4
    Dram RAS# Precharge Delay_______ 4
    Precharge Delay (tRAS)__________ 12


    ACT to ACT Delay (tRRD)_________ 3-4
    Rank Write to READ Delay________ 3-4
    Write to Precharge Delay_________ 3-6
    Refresh to ACT Delay______________ 38-42
    Read to Precharge Delay__________ 3-4
    Static tRead Value_______________ 6-8
    Static tRead Phase Adjust________ auto

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [0.2V] - +0.3
    PCI-E OverVoltage Control_ [normal]
    FSB OverVoltage Control___ [+0.1V]
    (G)MCH OverVoltage Control [+0.1V]
    CPU Voltage Control_______ [normal] Try 1.425, you may need more or less so if it wont boot add a bit more until it does

    Limit CPUID Max. to 3.....................: disabled
    No-Execute Memory Protect............: enabled
    CPU Enhanced Halt (C1E)................: enabled << Disable
    CPU Thermal Monitor 2(TM2) ...........: enabled
    CPU EIST Function.........................: enabled <<< Disable
    Virtualization Technology................: disabled

  7. #17
    Join Date
    Oct 2008
    Posts
    20

    Default Re: GA-P35-DS3L optimal settings

    If i can boot would should i test first memory or cpu?

  8. #18
    Join Date
    Oct 2008
    Posts
    20

    Default Re: GA-P35-DS3L optimal settings

    I booted fine but my temps on my cpu where about to reach 60 Celsius on orthos and i don't know if that's safe or not. Any recommendations?

    I went back to my old settings while i look around for info and wait for your reply. The stress test runs around 50 Celsius with stock settings, so i dont know waiting for your advice.

  9. #19
    Join Date
    Oct 2008
    Posts
    20

    Default Re: GA-P35-DS3L optimal settings

    Sorry bout three posts in a row i cant find the edit key, if you would reather me pm you ill do that. I got errors by orthos with the oc settings you gave me, i used the stress cpu and ram. Would would i change to fix that?

  10. #20
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35-DS3L optimal settings

    You should set your ram very loose and then get your CPU where you want it and stable. Then work on your ram

    60C is fine, you just want to stay out of the 70-75 range.

    Edit key should be right beside the quote key

    As for your errors I dont know because I gave you ranges for your ram and a Guess at your CPU Voltage. Post what you are using and I will see what I think

Page 2 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •