Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 4 FirstFirst ... 234
Results 31 to 35 of 35

Thread: GA-P35-DS3L optimal settings




  1. #31
    Join Date
    Oct 2008
    Posts
    20

    Default Re: GA-P35-DS3L optimal settings

    Do you mind giving me setting for 3.6 or is that to high? I lost the page i was looking at it had someone with the same processor doing it i was gonna copy it. Thanks a lot. Sorry about keep on asking you for stuff you gave me alot of info.

  2. #32
    Join Date
    Oct 2008
    Posts
    20

    Default Re: GA-P35-DS3L optimal settings

    These are my settings as of now

    Robust Graphics Booster___________ [Fast]
    CPU Clock Ratio ____________ [8x]

    CPU Host Clock Control_ [disabled]
    CPU Host Frequency (MHz)__________ [425]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00B]
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 4
    Dram RAS# to CAS# Delay_________ 4
    Dram RAS# Precharge Delay_______ 5 wont go lower
    Precharge Delay (tRAS)__________ 12


    ACT to ACT Delay (tRRD)_________ 3
    Rank Write to READ Delay________ 3
    Write to Precharge Delay_________ 3
    Refresh to ACT Delay______________ 42 wont go lower
    Read to Precharge Delay__________ 3
    Static tRead Value_______________ 7
    Static tRead Phase Adjust________ auto

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ +0.3
    PCI-E OverVoltage Control_ [normal]
    FSB OverVoltage Control___ [+0.1V]
    (G)MCH OverVoltage Control [+0.1V]
    CPU Voltage Control_______ [normal] 1.37500v

    Limit CPUID Max. to 3.....................: disabled
    No-Execute Memory Protect............: enabled
    CPU Enhanced Halt (C1E)................: Disable
    CPU Thermal Monitor 2(TM2) ...........: enabled
    CPU EIST Function.........................: Disable
    Virtualization Technology................: disabled

  3. #33
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35-DS3L optimal settings

    It's all good! Did you check your history for that page you had before? Just givin ya a hard time

    K, try this for 3.6. You may only be able to get 3.4-3.5 without higher voltages >>>>

    Robust Graphics Booster___________ [Fast]
    CPU Clock Ratio ____________ [8x]

    CPU Host Clock Control_ [disabled]
    CPU Host Frequency (MHz)__________ [450]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00B or D]
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 4
    Dram RAS# Precharge Delay_______ 4
    Precharge Delay (tRAS)__________ 12/15


    ACT to ACT Delay (tRRD)_________ 3-4
    Rank Write to READ Delay________ 3-6
    Write to Precharge Delay_________ 4-6
    Refresh to ACT Delay______________38-45
    Read to Precharge Delay__________ 3-6
    Static tRead Value_______________ 7-8
    Static tRead Phase Adjust________ auto

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ +0.3
    PCI-E OverVoltage Control_ [normal]
    FSB OverVoltage Control___ [+0.1V]
    (G)MCH OverVoltage Control [+0.1V]
    CPU Voltage Control_______ [normal] 1.37500v << Maybe 1.425 or more in the BIOS

    Limit CPUID Max. to 3.....................: disabled
    No-Execute Memory Protect............: enabled
    CPU Enhanced Halt (C1E)................: Disable
    CPU Thermal Monitor 2(TM2) ...........: enabled
    CPU EIST Function.........................: Disable
    Virtualization Technology................: disabled

  4. #34
    Join Date
    Oct 2008
    Posts
    20

    Default Re: GA-P35-DS3L optimal settings

    I got alot of errors trying 3.6 can you give me the numbers for 3.5 and that will be the last of me asking you for bios. Thanks in advance for your time and help.

  5. #35
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35-DS3L optimal settings

    Well they would be the same as above, just use 437/438 for your FSB and of course you will still need to find CPU Voltage

Page 4 of 4 FirstFirst ... 234

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •