Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: 996587 at 4-4-4-12




  1. #11
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: 996587 at 4-4-4-12

    You never answered me about your Fine Clock Ratio Statement?????? Still

    Try this out for 984 ram speed. I think your previous issue with 965 was MCH voltage. Try hitting Control + F1 on the MAIN BIOS screen then go into MIT and see if you can find "Driving Strength Profiles" If so use 1066

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: [Fast]
    CPU Clock Ratio ..........................: 8
    Fine CPU Clock Ratio.....................: 0.0

    CPU Frequency ...........................: 3.28GHz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: [410]
    PCI Express Frequency (Mhz) .........:100
    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control
    CPU Clock Drive...........................:800
    PCI Express Clock Drive.................:900
    CPU Clock Skew (ps)....................: 0-50
    MCH Clock Skew (ps)...................: 100-150


    DRAM Performance Control
    Performance Enhance...................: [Standard]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 333MHz
    System Memory Multiplier ..............: 2.40
    Memory Frequency (Mhz) ..............: 984
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time............................. 5
    tRCD ..............................................5
    tRP'.............................................. ... 5
    tRAS.............................................. .. 15

    Advanced Timing Control
    tRRD...........................................3
    tWTR..........................................4
    tWR............................................6
    tRFC...........................................52
    tRTP...........................................3
    Command Rate (CMD) ....................:2

    Channel A
    Static tRead Value............................:8-9
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto

    Channel B
    Static tRead Value..........................:8-9
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto

    Motherboard Voltage Control

    CPU
    CPU Vcore….……….........................: Normal (because auto gives me 1.33V and i think that's way too much for 3.28GHz) << you should manaully set this for sure. Auto or Normal both likely overvolt it. Keep in mind what you set will be about .6 or so less in windows

    CPU Termination…..... 1.200V*.......: 1.25-1.3
    CPU PLL…………………....1.500V*.......: Normal << Please set to what you see for stock, Auto overvolts this way to much

    CPU Referen.…………....0.755V*.......: Normal
    CPU Reference2………,,0.800V*.......: Normal

    MCH/ICH
    MCH Core…………….....1.100V...........:1.15/1.2-1.3 << Needed for stable 2x2GB
    MCH Reference….…….0.800V...........:Auto
    MCH/DRAM Ref.…......0.900V...........:Auto
    ICH I/O……………….....1.550V............:Auto
    ICH Core…………...……1.100V............:Don't have this

    DRAM
    DRAM Voltage ……....1.800V............: 2.0-2.1 (2.0 is likely fine, MCH Voltage was your problem I think)

  2. #12
    Join Date
    Oct 2008
    Posts
    21

    Default Re: 996587 at 4-4-4-12

    Oops sorry about the fine clock ratio. i totally missed that.

    Yes i do have the setting, but i left it at 0 since i didnt want to overclock the CPU that much...

    Here's what i got it stable at, and yes i believe the MCH solved my problem of lockups...

    But here's the thing, as i said previously, it seems the advanced timings in the bios don't take effect in windows!

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio ..........................: 8

    Fine CPU Clock Ratio.....................: 0.0

    CPU Frequency ...........................: 3.28GHz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: [410]
    PCI Express Frequency (Mhz) .........:100
    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control
    CPU Clock Drive...........................:800
    PCI Express Clock Drive.................:900
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)...................: 0


    DRAM Performance Control
    Performance Enhance...................: [Standard]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 333MHz
    System Memory Multiplier ..............: 2.40
    Memory Frequency (Mhz) ..............: 984
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time............................. 5
    tRCD .............................................. 5
    tRP'.............................................. ... 5
    tRAS.............................................. .. 15

    Advanced Timing Control
    tRRD...........................................3
    tWTR.......................................... 4
    tWR............................................6
    tRFC...........................................52
    tRTP...........................................3
    Command Rate (CMD) ....................:2

    Channel A
    Static tRead Value............................:8
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto

    Channel B
    Static tRead Value..........................:8
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto

    Motherboard Voltage Control

    CPU
    CPU Vcore….……….........................: 1.225
    CPU Termination…..... 1.200V*.......: 1.3
    CPU PLL…………………....1.500V*.......: 1.5
    CPU Referen.…………....0.755V*.......: Auto
    CPU Reference2………,,0.800V*.......: Auto

    MCH/ICH
    MCH Core…………….....1.100V...........:1.26
    MCH Reference….…….0.800V...........:Auto
    MCH/DRAM Ref.…......0.900V...........:Auto
    ICH I/O……………….....1.550V............:1.55
    ICH Core…………...……1.100V............:Don't have this

    DRAM
    DRAM Voltage ……....1.800V............: 2.0

    Driving Strength Profile.....:1066

    But what i see in Memset is

    Advanced Timing Control
    tRRD...........................................3
    tWTR.......................................... 12
    tWR............................................6 (Can't find this in Memset. What other name is it called?)
    tRFC...........................................52
    tRTP...........................................5
    Command Rate (CMD) ....................:2

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: 996587 at 4-4-4-12

    Ahh, ok about Fine clock, I just wanted to be sure as it sounded like you did not see it at first. Ya, I dont use it either, I use 9

    All settings should be taking affect in windows, as long as you are not seeing a red warning box when you enter the BIOS. As for Memset Vs. BIOS, you can see what is what here, I outlined with a image and some additional info >>>
    http://forums.tweaktown.com/f69/memo...vs-bios-27283/

  4. #14
    Join Date
    Oct 2008
    Posts
    2

    Default Re: 996587 at 4-4-4-12

    i do not really know the detail of my computer

  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •