Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Ga-EP45-DS3R E8400




  1. #11
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ga-EP45-DS3R E8400

    You mean 450 FSB? He/you could use 333 or 400 strap, 333 will provide a better result but is often hard to get stable with tighter ram timings

    You can use the 2.4 Multi only with 333 or 400 strap and it is fine to use it anytime if you get best results with it

    *EDIT*

    In the above link I provided you can see which multi's are available for which straps used

  2. #12
    Join Date
    Oct 2008
    Posts
    7

    Default Re: Ga-EP45-DS3R E8400

    so, i've set these:


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 4 Ghz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 445
    PCI Express Frequency (Mhz) .........: set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 900
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)...................: 0


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 400
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ..............: 890
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15

    Advanced Timing Control
    tRRD...........................................4
    tWTR..........................................4
    tWR............................................5
    tRFC...........................................54
    tRTP...........................................4
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................ set both channels 1200mhz

    Channel A
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto

    Channel B
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.36250
    CPU Termination…..... 1.200V*.......: 1.36
    CPU PLL…………………....1.500V*.......: 1.57
    CPU Referen.…………....0.7600V*.......:0.861
    CPU Reference2………,,0.800V*.......: i don't have

    MCH/ICH
    MCH Core…………….....1.100V...........:1.24
    MCH Reference….…….0.800V...........; auto
    MCH/DRAM Ref.…......0.900V...........: Auto
    ICH I/O……………….....1.500V............: Auto
    ICH Core…………...……1.100V............: Auto

    DRAM
    DRAM Voltage ……....1.800V............: 2.1
    DRAM Termination .…0.900V............: Auto<<< Leave
    Channel A Reference 0.900V............: Auto<<< Leave
    Channel B Reference 0.900V............: Auto<<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Disabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

    everything is stable exept one thing. when i switch on powerSW, coolers starts , after one second everything shut down and in 2-3 seconds starts again and the normally boot. i hope that's clearly explained. could you tell mi whats wrong and what need to be repair in bios ??

    one more thing, does DESA work with c1e and EISt disabled ?? i would like leave pc during night and would be great that it takes minimum energy.

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ga-EP45-DS3R E8400

    No, I dont understand. What is PowerSW? The power switch? If you do mean that then you just have some incorrect settings

    DESA? Dynamic Energy Saver Advanced? If so, no those would need to be enabled, your best bet is to use sleep or not worry about that type of thing since you want to overclock. You would only save a few $$ a year anyway

    I would make try to make these changes >>>>

    Driving Strength Profiles
    Driving Strength ............................ set both channels 1200mhz << Maybe 1066 would be best at sub 900Mhz

    Channel A
    Static tRead Value.........................:9-10
    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto

    Channel B
    Static tRead Value.........................:9-10
    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.36250
    CPU Termination…..... 1.200V*.......: 1.36 << Try 1.34
    CPU PLL…………………....1.500V*.......: 1.57 << Set Stock

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •