Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 5 of 5 FirstFirst ... 345
Results 41 to 46 of 46

Thread: GA EP45-DS3 + Memory problem?




  1. #41
    Join Date
    Oct 2008
    Posts
    24

    Default Re: GA EP45-DS3 + Memory problem?

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3.00


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 900
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)...................: 100


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [333]
    System Memory Multiplier ..............: 2.40b
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................6 [5]
    tRCD .........................................6 [5]
    tRP'...........................................6 [5]
    tRAS..........................................18 [18]

    Advanced Timing Control
    tRRD...........................................3 [5]
    tWTR..........................................3 [5]
    tWR............................................4 [5]
    tRFC...........................................46 [62]
    tRTP...........................................3 [5]
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................800mhz for channel A/B

    Channel A
    Static tRead Value.........................:7 [10]
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto

    Channel B
    Static tRead Value.........................:7 [10]
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto

    Motherboard Voltage Control
    Voltage Types normal current
    CPU
    CPU Vcore….………......1.2500v [auto]
    CPU Termination…..... 1.200V [auto]
    CPU PLL…………………....1.500V [auto]
    CPU Referen.…………....0.760v [0.745V]

    MCH/ICH
    MCH Core…………….....1.100V...........:[1.260V]
    MCH Reference….…….0.760V...........;[auto]
    MCH/DRAM Ref.…......0.900V...........:[auto]
    ICH I/O……………….....1.500V............:[auto]
    ICH Core…………...……1.100V............:[auto]

    DRAM
    DRAM Voltage ……....1.800V............: 1.9v
    DRAM Termination .…0.900V............: [auto]
    Channel A Reference 0.900V............: [auto]
    Channel B Reference 0.900V............: [auto]

    "The system has experienced boot failures because of overclocking or changes of voltages.

    Last setting in this page may coincide with current H/W states''
    The first message when entering Bios. And thats my current settings.

    Last voltage change i did was entering 1.9v instead of 2.1v on the RAM.

  2. #42
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA EP45-DS3 + Memory problem?

    Try 2.0 or 1.9V ram voltage. Why did you try 2.1 when you just said 1.9 was working, just wondering?

    Try this >>>
    Driving Strength ............................1066mhz for channel A/B

    Channel A & B
    Static tRead Value.........................:10
    Motherboard Voltage Control
    Voltage Types normal current
    CPU
    CPU Vcore….………......1.2500v [auto]
    CPU Termination…..... 1.200V [auto]
    CPU PLL…………………....1.500V [auto]
    CPU Referen.…………....0.760v [Auto]

    MCH/ICH
    MCH Core…………….....1.100V...........:[1.260V] 1.3 (You may also want to try less then stock to be sure your board is not incorrectly setup)

    MCH Reference….…….0.760V...........;[auto]
    MCH/DRAM Ref.…......0.900V...........:[auto]
    ICH I/O……………….....1.500V............:[auto]
    ICH Core…………...……1.100V............:[auto]

    DRAM
    DRAM Voltage ……....1.800V............: 1.9v-2.0

    That ram may just not be compatible, Many were not with P35 that Gigabyte listed as working. Not sure really as you should not be having this problem with the above settings

    Hey, try 400 MCH and Memory Multi 2.66 and see if it will boot (Static Tread 9 or above)

  3. #43
    Join Date
    Oct 2008
    Posts
    24

    Default Re: GA EP45-DS3 + Memory problem?

    1.9 has never worked properly, neither 1.8v or 2.1v. But i tried 2.1v since you said so when you posted the first chart. And if it was a memory voltage problem, i guess it would not hurt to crank the settings up a bit. But since it didn't work it didn't feel necessary to have them at 2.1 regularly.

    The problem is, when i first ordered the motherboard and ram i didn't check the compatibility list before ordering. These mems are not listed on their supportlist. If the settings are continue to fail, is the only solution buying new memories?

    I will try these settings and report when i got some info.

  4. #44
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA EP45-DS3 + Memory problem?

    Ya, Likely so. Mushkin is a great brand not on the list, as well as G.Skill and GeIL

    Many that are on the lists I feel are actually incompatible. You mentioned it so I told you my thoughts

  5. #45
    Join Date
    Oct 2008
    Posts
    24

    Default Re: GA EP45-DS3 + Memory problem?

    Yes, i might have more questions according to that if i have to replace mine.

    I am wondering, when you said Hey, try 400 MCH and Memory Multi 2.66 and see if it will boot (Static Tread 9 or above)

    You meant (G)MCH frequency latch and the system memory multiplier then?
    And what do you mean by static tread 9?
    Thanks.

  6. #46
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA EP45-DS3 + Memory problem?

    Yes, that is exactly what I meant. MCH latch 400, memory multiplier 2.66 and Static Tread Value of 9

Page 5 of 5 FirstFirst ... 345

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •