Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: raid 0 configuration on a ga-x48t-dq6




  1. #1
    Join Date
    Oct 2008
    Posts
    2

    Unhappy raid 0 configuration on a ga-x48t-dq6

    hello!
    can anyoane help me with some instructions for making a ride 0 from bios on a MB GA-X48T-DQ6.
    i would like to see instructions step by step. i tried 3 times and simply didn't work .
    thx a lot

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: raid 0 configuration on a ga-x48t-dq6

    Plug your two Disks into the first two yellow ports.

    You will need this driver on a Floppy for XP, USB stick for vista. In XP press F6 as soon as XP install starts, you will see this at the bottom of the screen. Vista you will load this driver at the disk screen where you are shown disks to install to. Use the Load Driver button. When you choose the driver to load after you let XP/Vista get the driver be sure you choose the one that says ICH10R and RAID not AHCI>>>

    32bit
    GIGABYTE - Support - Motherboard - Driver Download

    64bit
    GIGABYTE - Support - Motherboard - Driver Download

    In the BIOS advanced Page set this

    SATA RAID/AHCI Mode (Intel ICH9R Southbridge).............Set to RAID

    Then reboot and push Control + I on the BIOS post screen (When you would normally pres Delete to enter the BIOS)

    Once inside the RAID BIOS you should be set, you do have your manual right? If not, get it here and the RAID Setup instructions are at the back >>
    GIGABYTE - Support - Motherboard - Manual - GA-X48T-DQ6

    I stopped my directions short there because I assume you got that part right, just needed the above info right? If not, let me know more what your issue is and I will advise you further

  3. #3
    Join Date
    Oct 2008
    Posts
    2

    Default Re: raid 0 configuration on a ga-x48t-dq6

    ok i create may raid it's all ok but..when i boot from cd my windows F6 is not responding windows keep loading and when it's about starting appears an error about chkdsk...it's driving me crazy i will give up with raid and install windows normally.
    thx a lot for the answer..:)

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: raid 0 configuration on a ga-x48t-dq6

    You may have memory settings issues. I would try it again with only one stick of ram installed and manually set the ram voltage

    And use a PS/2 Keyboard, if you are using USB that may be why F6 is not letting you load the driver

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •