Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: GA-EP45-DS3L crashing on resume from sleep




  1. #1
    Join Date
    Oct 2008
    Posts
    11

    Default GA-EP45-DS3L crashing on resume from sleep

    and hibernation (!!!)

    System spec:

    Core 2 Duo 3.33Ghz 45nm
    2x 4GB (2x2GB) Corsair TwinX DDR2 XMS2 PC8500
    ATI Radeon 4870X2 (8.9)
    Zalman ZM1000-HP PSU
    Asus Xonar DX (6.12.8.1738)
    GA-EP45-DS3L (f9)
    Western Digital Black Caviar 1TB
    Pioneer DVD-RW DVR-216D (1.06)
    On-board components - Drivers current as of 18th October.
    Windows Vista Ultimate 64-bit w/ SP1

    Prior to F9 my PC wouldn't resume from sleep, the fans would roar, go dead, then repeat over and over. With F9 applied I put the machine to sleep and brought it back to life. Success! I went to bed a happy man.

    Unfortunately I found out that if the computer was left to sleep for a while it would blue screen seconds after resuming. The first couple were encouraging, a failure in the realtek driver and one in the USB, and it just so happened that new realtek and chipset drivers came out on te 15th October, so I applied them.

    No luck, now it's BSOD for things I can't trace, and as they simply represent the last thing on the stack prior to crash this doesn't mean they're the cause either, they're just the most likely candidate.

    I reset the BIOS to optimised defaults and changed three settings:

    1. I enabled AHCI mode (it was on when Windows was installed)
    2. I enabled native mode for AHCI.
    3. I set HPET to 64-bit as I use Windows Vista 64-bit

    Tested with this and the problem continued.

    I went back to my customised settings:

    1. All drives set to None (AHCI handles this)
    2. All memory, VGA and CPU settings to auto, CIA to none. Reduced memory performance to Standard.
    3. Hard drive first boot device
    4. AHCI on with native mode.
    5. Full legacy USB support
    6. Allow mouse and keyboard to wake machine
    7. Disabled Auzilla codec
    8. Enabled green LAN
    9. Enabled those additional levels of CPU power saving. Something level 2 and level 4?

    Nope, crashes. CPU-Z (attached) shows the memory using the EPP profile though and the timings are in line with that profile 1066 5-5-5-15 2T.

    Now I try optimised defaults but manually set the RAM timings to 1066 5-5-5-15 v2.1

    Same problem

    My latest test was to use hibernation, but upon resuming Windows crashed, reporting errors in hyberfil.sys.

    I've run chkdsk /b and sfc /scannow, no problems.

    I've run Windows Memory Diagnostics on all memory performance Standard through Extreme, extended test using at least eight passes every time. No problems.

    memtest+ 1.7 reported a problem, but it was released before support for this board's chipset, so I don't know if that is reliable. I haven't been able to get memtest + 2.01 to boot, it hangs on Loading...

    prime95 always stops one thread with a rounding error, but I haven't used it with all the above BIOS tests. I've been meaning to try a blend test with performance standard for the memory. CPU never goes above 60 Celsius, even when run for 18 hours.

    I ran the quick check from WD Diagnostics on the hard drive, no problems. Haven't tried the thorough takes forever test yet.

    No problems with the machine outside sleep crashes, apart from a crash I had during logon today, there was a sound stutter and then it blue screened. It was loading some app and I was UACing another app.

    I don't run DES, the damn thing always crashed, nor is EasyTune on the machine because it always wanted to run (something) at startup, no matter what I told it.

    Advice? Likely cause? I miss sleep so much.
    Attached Files Attached Files
    Last edited by Quitch; 10-24-2008 at 05:38 AM.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-DS3L crashing on resume from sleep

    Please post me your settings >>>>

    As for Easytune, if you do not want it to run at startup you can use windows defender, tools, software explorer to disable it. Or you can use this simple startup manager (It will be in control panel, 32bit items after you install it) >>>
    http://www.mlin.net/files/StartupCPL.zip


    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: 
    CPU Clock Ratio ..........................: 
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 
    PCI Express Clock Drive.................: <<< 
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 
    Memory Frequency (Mhz) ..............: 
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................
    
    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................
    
    Channel A
    Static tRead Value.........................:7-10
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:7-10
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: <<< Leave
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above)
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above)
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
    Last edited by Lsdmeasap; 10-25-2008 at 12:58 AM.

  3. #3
    MDDI is offline Junior Member
    Join Date
    Jul 2008
    Location
    Florida USA
    Posts
    70

    Default Re: GA-EP45-DS3L crashing on resume from sleep

    Disable Wake Up Mouse.
    Disable Wake Up Keyboard.
    Try waking up with power button.

  4. #4
    Join Date
    Oct 2008
    Posts
    11

    Default Re: GA-EP45-DS3L crashing on resume from sleep

    Terribly sorry for taking so long to come back to you, I've been on holiday. I finally ran a full disk check, but it came up clean. I've also found that the machine can blue screen when starting up from a shutdown, yet I don't have a single issue after boot and both chkdsk c: /b and sfc /scannnow tell me there aren't any problems.

    Really hoping you can help.

    My BIOS as it stands now:

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 10 X
    Fine CPU Clock Ratio.....................: +0.0
    CPU Frequency ...........................: 3,33Ghz (333x10)
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled] 
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........: Auto
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800mV 
    PCI Express Clock Drive.................: 800mV
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)...................: 0ps
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Profile2
    (G)MCH Frequency Latch...............: [333Mhz]
    System Memory Multiplier ..............: Auto
    Memory Frequency (Mhz) ..............: 1066 1066
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................ 5
    tRCD ......................................... 5
    tRP'........................................... 5
    tRAS.......................................... 15
    
    Advanced Timing Control
    tRRD........................................... 4 Auto
    tWTR.......................................... 4 Auto
    tWR............................................ 8 Auto
    tRFC........................................... 68 Auto
    tRTP........................................... 4 Auto
    Command Rate (CMD) ....................: 0 Auto
    
    Driving Strength Profiles
    Driving Strength ............................ Auto
    
    Channel A
    Static tRead Value.........................: 8 Auto
     tRD Phase0 Adjustment...................: 0 Auto
    tRD Phase1 Adjustment...................: 0 Auto
     tRD Phase2 Adjustment .................: 0 Auto
     tRD Phase3 Adjustment..................: 0 Auto
    Trd2rd(Different Rank)....................: 8 Auto 
    Twr2wr(Different Rank)...................: 8 Auto 
    Twr2rd(Different Rank)...................: 7 Auto 
    Trd2wr(Same/Diff Rank)..................: 9 Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    DDR Write Training.....................: Auto
    
    Channel B
    
    Same as Channel A
    
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1,250000V Auto
    CPU Termination…..... 1.200V*.......: 1,200V Auto
    CPU PLL…………………....1.500V*.......: 1.550V Auto
    CPU Referen.…………....0.755V*.......: 0.805V Auto
    CPU Reference2………,,0.800V*.......: N/A
    
    MCH/ICH
    MCH Core…………….....1.100V...........: 1.100V Auto
    MCH Reference….…….0.800V...........; 0.760V Auto
    MCH/DRAM Ref.…......0.900V...........: N/A
    ICH I/O……………….....1.550V............: 1.550V Auto
    ICH Core…………...……1.100V............: N/A
    
    DRAM
    DRAM Voltage ……....1.800V............: 1.800V 2.100V
    DRAM Termination .…0.900V............: N/A
    Channel A Reference 0.900V............: N/A
    Channel B Reference 0.900V............: N/A
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support....................: [Enabled]
    x C4/C4E State Support..................: [Enabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Enabled]
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled]

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-DS3L crashing on resume from sleep

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 10 X
    Fine CPU Clock Ratio.....................: +0.0
    CPU Frequency ...........................: 3,33Ghz (333x10)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled]
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........: Auto

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800mV
    PCI Express Clock Drive.................: 800mV
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)...................: 100-250


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Profile2
    (G)MCH Frequency Latch...............: [333Mhz] << Set this to Auto if you are going to use XMP. But for 8GB I would advise you set it all manually. Setting XMP to disabled, this to 333 and use 3.20 for your memory multi

    System Memory Multiplier ..............: Auto
    Memory Frequency (Mhz) ..............: 1066 1066
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................ 5
    tRCD ......................................... 5
    tRP'........................................... 5
    tRAS.......................................... 15/18

    Set all below to highest suggested and then later you can lower. Test Resume with all set high and see how it does and let me know

    Advanced Timing Control
    tRRD........................................... 3-6
    tWTR.......................................... 3-6 (Set 14)
    tWR............................................ 4-8 (Set 16)
    tRFC........................................... 56-70 (Set 75)
    tRTP........................................... 3-6
    Command Rate (CMD) ....................: 2

    Driving Strength Profiles
    Driving Strength ............................ 1066 or 1200, latter may be best

    Channel A
    Static tRead Value.........................: 9-12
    tRD Phase0 Adjustment...................: 0 Auto
    tRD Phase1 Adjustment...................: 0 Auto
    tRD Phase2 Adjustment .................: 0 Auto
    tRD Phase3 Adjustment..................: 0 Auto
    Trd2rd(Different Rank)....................: 8 Auto
    Twr2wr(Different Rank)...................: 8 Auto
    Twr2rd(Different Rank)...................: 7 Auto
    Trd2wr(Same/Diff Rank)..................: 9 Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    DDR Write Training.....................: Auto

    Channel B

    Same as Channel A


    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1,250000V Auto
    CPU Termination…..... 1.200V*.......: 1,200V << Pleas set to Stock, Auto overvolts this
    CPU PLL…………………....1.500V*.......: 1.550V << Pleas set to Stock, Auto overvolts this
    CPU Referen.…………....0.755V*.......: 0.805V Auto
    CPU Reference2………,,0.800V*.......: N/A

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.2-1.35 << For SURE needed for more then 4GB
    MCH Reference….…….0.800V...........; 0.760V Auto
    MCH/DRAM Ref.…......0.900V...........: N/A
    ICH I/O……………….....1.550V............: 1.550V Auto
    ICH Core…………...……1.100V............: N/A

    DRAM
    DRAM Voltage ……....1.800V............: 1.800V 2.100V
    DRAM Termination .…0.900V............: N/A
    Channel A Reference 0.900V............: N/A
    Channel B Reference 0.900V............: N/A

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support....................: [Enabled]
    x C4/C4E State Support..................: [Enabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Enabled]

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled]

  6. #6
    Join Date
    Oct 2008
    Posts
    11

    Default Re: GA-EP45-DS3L crashing on resume from sleep

    Does the XMP profile setting have any effect if you manually set everything, or does it simply determine the automatic values?

    Thanks for the detailed response, I guess I'll try everything together, if that fixes it turn them off one at a time and see what's required to work.

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-DS3L crashing on resume from sleep

    XMP is for if you want to use Auto, and your memory must be XMP programmed/compatible for it to work/be enabled.

    If you do use it, you would need to leave everything else on Auto

  8. #8
    Join Date
    Oct 2008
    Posts
    11

    Default Re: GA-EP45-DS3L crashing on resume from sleep

    Okay I used the following settings:

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 10 X
    Fine CPU Clock Ratio.....................: +0.0
    CPU Frequency ...........................: 3,33Ghz (333x10)
    
    
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled]
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........: Auto
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800mV
    PCI Express Clock Drive.................: 800mV
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)...................: 250ps
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 333Mhz
    
    System Memory Multiplier ..............: 3.20B
    Memory Frequency (Mhz) ..............: 1066 1066
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................ 5
    tRCD ......................................... 5
    tRP'........................................... 5
    tRAS.......................................... 18
    
    Advanced Timing Control
    tRRD........................................... 6
    tWTR.......................................... 14
    tWR............................................ 16
    tRFC........................................... 75
    tRTP........................................... 6
    Command Rate (CMD) ....................: 2
    
    Driving Strength Profiles
    Driving Strength ............................ 1066
    
    Channel A
    Static tRead Value.........................: 12
    tRD Phase0 Adjustment...................: 0 Auto
    tRD Phase1 Adjustment...................: 0 Auto
    tRD Phase2 Adjustment .................: 0 Auto
    tRD Phase3 Adjustment..................: 0 Auto
    Trd2rd(Different Rank)....................: 8 Auto
    Twr2wr(Different Rank)...................: 8 Auto
    Twr2rd(Different Rank)...................: 7 Auto
    Trd2wr(Same/Diff Rank)..................: 9 Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    DDR Write Training.....................: Auto
    
    Channel B
    
    Same as Channel A
    
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1,250000V Auto
    CPU Termination…..... 1.200V*.......: 1,200V 1.200V
    CPU PLL…………………....1.550V*.......: 1.550V 1.550V
    CPU Referen.…………....0.805V*.......: 0.805V Auto
    CPU Reference2………,,0.800V*.......: N/A
    
    MCH/ICH
    MCH Core…………….....1.100V...........: 1.35
    MCH Reference….…….0.800V...........; 0.760V Auto
    MCH/DRAM Ref.…......0.900V...........: N/A
    ICH I/O……………….....1.550V............: 1.550V Auto
    ICH Core…………...……1.100V............: N/A
    
    DRAM
    DRAM Voltage ……....1.800V............: 1.800V
    DRAM Termination .…0.900V............: N/A
    Channel A Reference 0.900V............: N/A
    Channel B Reference 0.900V............: N/A
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support....................: [Enabled]
    x C4/C4E State Support..................: [Enabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Enabled]
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled]
    The PC seemed to resume from sleep okay, but after a little over a minute later Windows Explorer crashes, and then twenty seconds later the PC blue screened. It was the longest it has lasted, but alas, no success. :(

  9. #9
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45-DS3L crashing on resume from sleep

    See if these changes help any. I do see you need to set your ram voltage for sure, that alone may fix it as your ram timings are very loose already >>>>

    Advanced Clock Control [Press Enter]

    PCI Express Clock Drive.................: 900mV

    MCH Clock Skew (ps)...................: 250ps << try 150-200 as well as below suggestions



    MCH/ICH
    MCH Core…………….....1.100V...........: 1.35 << try less after you set your ram voltage to what it should be

    DRAM
    DRAM Voltage ……....1.800V............: 1.800V << Here is likely your issue, your ram is not 1.8V spec'd ram is it? I doubt that very much, more likely it is 2.0 or 2.1 and would need this for sure manually set to that



    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled] << Disable
    C2/C2E State Support....................: [Enabled]
    x C4/C4E State Support..................: [Enabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled] << Disable
    Virtualization Technology................: [Enabled]

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled]

  10. #10
    Join Date
    Oct 2008
    Posts
    11

    Default Re: GA-EP45-DS3L crashing on resume from sleep

    I'll try those when I get back. Should I use them with everything else set to auto or as they were at the end of the last test?

    The RAM uses 1.8v for JDEC settings and 2.1 for EPP (the XMP profile settings). The values above are in-line with the fastest JDEC profile, though I realise now that the driving strength is 1066 above but to be correctly in line with that profile would need to be 800. So yes, I might need to change the voltage.

    I've found that when I set the MCH Voltage as high as 1.35 that I receive a warning on the MIT screen that the machine failed to boot due to voltage/overclocking changes and that the values on the screen may not represent the true values. From testing I think this is the MCH Voltage.

    Some reading on the Corsair forums found me a recommendation to increase North Bridge voltage by 0.05 in situations where four DIMMs were in use. The next step up in MCH Voltage from the default of 1.1 is 1.16, so I tried that with everything else on auto, however upon attempting to resume from sleep this morning the PC simply span the fans up and down ad-nauseam without ever waking.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •