Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 7 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 69

Thread: Gigabyte EP45-UD3P + E8400 Overclocking




  1. #31
    Join Date
    Oct 2008
    Location
    Kuala Lumpur, Malaysia
    Posts
    44

    Default Re: Gigabyte EP45-UD3P + E8400 Overclocking

    can i know what is GTL stands for bro?
    Pero-Sesor: Core i7 860 2.83Ghz
    Curling-Sis-Term: Custom Liquid Cooling
    Mother-Bot: Gigabyte P55-UD4P
    Rrrr-Am: 2x2GB Team Xtreem DDR3 2000
    Hard-This: Western Digital Raptor
    Gera-Pig-Cut: Sapphire 4870 512MB DDR5
    Pee-Ass-You: Corsair HX620w Modular
    Cass-Sing: Lian LI PC-A17 Silver


  2. #32
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte EP45-UD3P + E8400 Overclocking

    GTL is GTL_ref Same as CPU Reference voltages. Some boards just call it GTL_Ref or GTL

  3. #33
    Join Date
    Oct 2008
    Location
    Kuala Lumpur, Malaysia
    Posts
    44

    Default Re: Gigabyte EP45-UD3P + E8400 Overclocking

    hi bro.,good morning.,i already try to drop the VTT setting.,but still cannot la bro.,i only can drop it to 1.42v.,if i set to 1.30 the system no diaplay at all.,i only can drop the vcore only.,the last vcore i can set is 1.34v..this is the setting ss..
    Attached Images Attached Images Gigabyte EP45-UD3P + E8400 Overclocking-dsc00319-jpg 
    Pero-Sesor: Core i7 860 2.83Ghz
    Curling-Sis-Term: Custom Liquid Cooling
    Mother-Bot: Gigabyte P55-UD4P
    Rrrr-Am: 2x2GB Team Xtreem DDR3 2000
    Hard-This: Western Digital Raptor
    Gera-Pig-Cut: Sapphire 4870 512MB DDR5
    Pee-Ass-You: Corsair HX620w Modular
    Cass-Sing: Lian LI PC-A17 Silver


  4. #34
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte EP45-UD3P + E8400 Overclocking

    If you are stuck like that then please load optimized defaults again and save and apply and reboot and start over. Lowering that setting (Which is way to high) should not cause a failure.

    What speed are you trying to run? You may need to raise Vcore before you lower the Vtt is why you think you cannot

  5. #35
    Join Date
    Oct 2008
    Location
    Kuala Lumpur, Malaysia
    Posts
    44

    Default Re: Gigabyte EP45-UD3P + E8400 Overclocking

    ok bro.,i'll try it later.,tq so much bro.,btw.,i just want to run 4ghz only..
    Pero-Sesor: Core i7 860 2.83Ghz
    Curling-Sis-Term: Custom Liquid Cooling
    Mother-Bot: Gigabyte P55-UD4P
    Rrrr-Am: 2x2GB Team Xtreem DDR3 2000
    Hard-This: Western Digital Raptor
    Gera-Pig-Cut: Sapphire 4870 512MB DDR5
    Pee-Ass-You: Corsair HX620w Modular
    Cass-Sing: Lian LI PC-A17 Silver


  6. #36
    Join Date
    Oct 2008
    Location
    Kuala Lumpur, Malaysia
    Posts
    44

    Default Re: Gigabyte EP45-UD3P + E8400 Overclocking

    hi bro.,this is the highest i can go.,only with 445fsb.,450fsb need to pump vcore and the temp around 70-80c..is the temperature ok bro?
    Attached Images Attached Images Gigabyte EP45-UD3P + E8400 Overclocking-jpg 
    Last edited by Slipkorn_78; 10-29-2008 at 11:31 AM.
    Pero-Sesor: Core i7 860 2.83Ghz
    Curling-Sis-Term: Custom Liquid Cooling
    Mother-Bot: Gigabyte P55-UD4P
    Rrrr-Am: 2x2GB Team Xtreem DDR3 2000
    Hard-This: Western Digital Raptor
    Gera-Pig-Cut: Sapphire 4870 512MB DDR5
    Pee-Ass-You: Corsair HX620w Modular
    Cass-Sing: Lian LI PC-A17 Silver


  7. #37
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte EP45-UD3P + E8400 Overclocking

    Nice, I see you got Vtt back down. I would think you may need a bit of VTt now and some more vcore to get stable

    NO 70-80C is not good, especially with that low of a voltage. Did you use too much paste? Are you SURE the heatsink is fully tight?

  8. #38
    Join Date
    Oct 2008
    Location
    Kuala Lumpur, Malaysia
    Posts
    44

    Default Re: Gigabyte EP45-UD3P + E8400 Overclocking

    hi bro.,i've already check the heatsink.,everything is fine.,i reseat the heatsink also same temperature.,the processor VID is 1.174.,i think the VID is lower but wonder why the temp is higher.,last time my proc with 1.250 VID but get a lower temp just need to pump vcore to 1.38v to get stable.,the temp also not reach 60c.,i try at stock speed also 44-45c.,after oc get 48-52c cold boot.,do you know why bro..if i set to 1.30v the temp is 67-78c..thats why i set it to 1.23v to rach 4ghz..
    Pero-Sesor: Core i7 860 2.83Ghz
    Curling-Sis-Term: Custom Liquid Cooling
    Mother-Bot: Gigabyte P55-UD4P
    Rrrr-Am: 2x2GB Team Xtreem DDR3 2000
    Hard-This: Western Digital Raptor
    Gera-Pig-Cut: Sapphire 4870 512MB DDR5
    Pee-Ass-You: Corsair HX620w Modular
    Cass-Sing: Lian LI PC-A17 Silver


  9. #39
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  10. #40
    Join Date
    Oct 2008
    Location
    Kuala Lumpur, Malaysia
    Posts
    44

    Default Re: Gigabyte EP45-UD3P + E8400 Overclocking

    i'm sure bro.,i already reseat the heatsink 2-3 times.,but still same.,i use Xigmatek S-1283 cooler with arctic cooling MX-2 paste..i only apply thin layer only..
    Pero-Sesor: Core i7 860 2.83Ghz
    Curling-Sis-Term: Custom Liquid Cooling
    Mother-Bot: Gigabyte P55-UD4P
    Rrrr-Am: 2x2GB Team Xtreem DDR3 2000
    Hard-This: Western Digital Raptor
    Gera-Pig-Cut: Sapphire 4870 512MB DDR5
    Pee-Ass-You: Corsair HX620w Modular
    Cass-Sing: Lian LI PC-A17 Silver


Page 4 of 7 FirstFirst ... 23456 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •