Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 5 of 7 FirstFirst ... 34567 LastLast
Results 41 to 50 of 69

Thread: Gigabyte EP45-UD3P + E8400 Overclocking




  1. #41
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte EP45-UD3P + E8400 Overclocking

    How thin is thin? Maybe you should do Thin LINE and not layer

    I had a Zalman 9700 which sucks compared to that cooler and at 1.328 Actual voltage I would only get to about 65C at load. How hot is it where you live?

    And do you have good airflow in your case?

  2. #42
    Join Date
    Oct 2008
    Location
    Kuala Lumpur, Malaysia
    Posts
    44

    Default Re: Gigabyte EP45-UD3P + E8400 Overclocking

    i'm from malaysia bro.,you malaysia is a bit hot weather.,i think my case airflow is ok.,btw bro.,do i need apply thin line vertical or horizontal..
    Pero-Sesor: Core i7 860 2.83Ghz
    Curling-Sis-Term: Custom Liquid Cooling
    Mother-Bot: Gigabyte P55-UD4P
    Rrrr-Am: 2x2GB Team Xtreem DDR3 2000
    Hard-This: Western Digital Raptor
    Gera-Pig-Cut: Sapphire 4870 512MB DDR5
    Pee-Ass-You: Corsair HX620w Modular
    Cass-Sing: Lian LI PC-A17 Silver


  3. #43
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte EP45-UD3P + E8400 Overclocking

    Here is a How to By Arctic Silver for Core 2 Duo's >>>
    http://www.arcticsilver.com/pdf/appi..._dual_wcap.pdf

    But to answer you, it is Vertical From the Center of the CPU as shown here (From the PDF) >>>



    Here is MX-2 directions, also good using the small pea sized ball method >>>
    http://www.arctic-cooling.com/downlo...mx2_retail.pdf

  4. #44
    Join Date
    Oct 2008
    Location
    Kuala Lumpur, Malaysia
    Posts
    44

    Default Re: Gigabyte EP45-UD3P + E8400 Overclocking

    hi bro.,i have 2nd system for oc.,i'm using gigabyte EP43-DS3L.,my problem is cannot oc to 4ghz with E8500 processor.,only can achieve to 3.97ghz with 1.30v.,the spec as follows..

    E8500 3.16ghz
    Gigabyte EP43-DS3L
    Kingston Hyper X 4Gb/800 (KHX6400D2K2/4G)
    Sapphire 4850 512MB D3
    Silverstone 560W PSU

    This is the bios setting template..


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0.5
    CPU Frequency ...........................: 4.00


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 422Mhz
    PCI Express Frequency (Mhz) .........:Set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 50
    MCH Clock Skew (ps)...................: <<< 150


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [400]
    System Memory Multiplier ..............: 2.00
    Memory Frequency (Mhz) ..............: 840
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15/18

    Advanced Timing Control
    tRRD...........................................4
    tWTR..........................................5
    tWR............................................5
    tRFC...........................................62
    tRTP...........................................5
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................1066-1200 (1200 may be best)

    Channel A
    Static tRead Value.........................:8-10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:8-10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.32v

    CPU Termination…..... 1.200V*.......: <<< 1.30
    CPU PLL…………………....1.500V*.......: <<< 1.550
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above)
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above)

    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.3
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 2.1
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    Pero-Sesor: Core i7 860 2.83Ghz
    Curling-Sis-Term: Custom Liquid Cooling
    Mother-Bot: Gigabyte P55-UD4P
    Rrrr-Am: 2x2GB Team Xtreem DDR3 2000
    Hard-This: Western Digital Raptor
    Gera-Pig-Cut: Sapphire 4870 512MB DDR5
    Pee-Ass-You: Corsair HX620w Modular
    Cass-Sing: Lian LI PC-A17 Silver


  5. #45
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte EP45-UD3P + E8400 Overclocking

    More Vcore for sure, that 1.32 is likely only 1.26 or so in windows

  6. #46
    Join Date
    Oct 2008
    Location
    Kuala Lumpur, Malaysia
    Posts
    44

    Default Re: Gigabyte EP45-UD3P + E8400 Overclocking

    hi bro.,good morning.,i already clock my system to 4ghz.,the problem is now when i play Crysis Warhead the system will jump into windows after loading the game.,i try to run stock setting and it works fie.,can i know what cause the problem..?
    Pero-Sesor: Core i7 860 2.83Ghz
    Curling-Sis-Term: Custom Liquid Cooling
    Mother-Bot: Gigabyte P55-UD4P
    Rrrr-Am: 2x2GB Team Xtreem DDR3 2000
    Hard-This: Western Digital Raptor
    Gera-Pig-Cut: Sapphire 4870 512MB DDR5
    Pee-Ass-You: Corsair HX620w Modular
    Cass-Sing: Lian LI PC-A17 Silver


  7. #47
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  8. #48
    Join Date
    Oct 2008
    Location
    Kuala Lumpur, Malaysia
    Posts
    44

    Default Re: Gigabyte EP45-UD3P + E8400 Overclocking

    jumps into windows mean.i cannot play the game..do you know why?
    Pero-Sesor: Core i7 860 2.83Ghz
    Curling-Sis-Term: Custom Liquid Cooling
    Mother-Bot: Gigabyte P55-UD4P
    Rrrr-Am: 2x2GB Team Xtreem DDR3 2000
    Hard-This: Western Digital Raptor
    Gera-Pig-Cut: Sapphire 4870 512MB DDR5
    Pee-Ass-You: Corsair HX620w Modular
    Cass-Sing: Lian LI PC-A17 Silver


  9. #49
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte EP45-UD3P + E8400 Overclocking

    Maybe your PSU does not have enough power after you overclock for the system and the card, not sure really as I do not game myself

    Do you have PCI Express set to 100 in the BIOS?

  10. #50
    Join Date
    Oct 2008
    Location
    Kuala Lumpur, Malaysia
    Posts
    44

    Default Re: Gigabyte EP45-UD3P + E8400 Overclocking

    yes bro.,i already set to 100.,i try auto also cannot..
    Pero-Sesor: Core i7 860 2.83Ghz
    Curling-Sis-Term: Custom Liquid Cooling
    Mother-Bot: Gigabyte P55-UD4P
    Rrrr-Am: 2x2GB Team Xtreem DDR3 2000
    Hard-This: Western Digital Raptor
    Gera-Pig-Cut: Sapphire 4870 512MB DDR5
    Pee-Ass-You: Corsair HX620w Modular
    Cass-Sing: Lian LI PC-A17 Silver


Page 5 of 7 FirstFirst ... 34567 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •