Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: Memory conflict?




  1. #1
    Join Date
    Mar 2008
    Posts
    7

    Default Memory conflict?

    I own a Gigabyte GA-P35-DS3 with 2 sticks of 1 gig each CORSAIR CL5 800mhz DDR2... i just bought a new G.SKILL 4096MB (2048MBX2) DDR2 800 CL4-4-4-12 GBPK and hoped they will all live together in harmony :) . after couple of hours of Memtest86+ i got some errors. I took my old ram out and checked for a night with memtest - all good. took the new ones out and checked the old ones for a night - all good, so I'm guessing there's isn't much i can do other then taking my old CORSAIR out and buy the same G.skill in the future but i thought i'll ask any way..is there a way to solve such a thing? Maybe something in the BOIS is not configured right?
    (any way i think i'll leave all the 6 gigs in until the first BSOD)

    Thanks
    Last edited by Shasoosh; 10-29-2008 at 01:06 AM.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Memory conflict?

    You cannot mix brands for sure, often not even the same brand bought at different times. Sure you can get them to work "Maybe" but the performance will be terrible

    You will eventually corrupt your disk if you keep using both. So you should settle for the 2x2 g.skills and sell the others and either use 4Gb or get some similar G.Skill 2x1's and try to tweak them to work together.

    But, if you would like some help trying to get those to work poorly together I can give you some BIOS settings to try to pass memtest86+. Give me your settings you are using now and I will advise back, but again I DO suggest against this >>>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8] 
    Fine Clock Ratio ____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450] 
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    
    Performance Enhance = [Standard]
    
    CAS Latency Time________________ ?
    Dram RAS# to CAS# Delay_________ ?
    Dram RAS# Precharge Delay_______?
    Precharge Delay (tRAS)__________ ?
    
    ACT to ACT Delay (tRRD)_________ ?
    Rank Write to READ Delay________ ?
    Write to Precharge Delay_________ ?
    Refresh to ACT Delay______________ ?
    Read to Precharge Delay__________ ?
    Static tRead Value_______________
    Static tRead Phase Adjust________ [Auto]
    
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] 
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.1V] 
    CPU Voltage Control_______ [1.25]
    
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •