Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 34

Thread: first build EP45-DS3R issue




  1. #11
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: first build EP45-DS3R issue

    ICH core is only adjustable in some boards.

    What Memtest program are you using? I ask because I have not seen that error ever, and suspect you may be using the wrong program especially since you offered a screenshot as memtest86+ can only be ran in DOS mode. You should use The latest Memtest86+ version 2.01 >>>
    Memtest86+ - Advanced Memory Diagnostic Tool

    If you are still having errors in that as well, I would need to see your full settings to best advise you so please do post them for me

  2. #12
    Join Date
    Oct 2008
    Posts
    18

    Default Re: first build EP45-DS3R issue

    sorry LSD.. just wondering if you have any other recomendations for settings within my bios i could try?

  3. #13
    Join Date
    Oct 2008
    Posts
    18

    Default Re: first build EP45-DS3R issue

    sorry Lsd i didn't see your last msg...

    that the memtest i was using .. i ment i could actually take a picture (with a camera) and post the error on here..

    i tried lowering the Ram to 800Mhz and it pass the memtest.. if that helps so i think all the ram if good... it would be great if i could get it all running and stable at 1066...

    thanks for the your help i will post all the settings tonight...

    whats the best way to post the settings?

  4. #14
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: first build EP45-DS3R issue

    Please manually write them down, or copy this to a notepad and then fill it in and write them back here by copy/paste. Give me what settings exactly you use for 106 that fails and I will see what I can suggest >>>>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: 
    CPU Clock Ratio ..........................: 
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 
    PCI Express Clock Drive.................: <<< 
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 
    Memory Frequency (Mhz) ..............: 
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................
    
    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................
    
    Channel A
    Static tRead Value.........................:7-10
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:7-10
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: <<< Leave
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  5. #15
    Join Date
    Oct 2008
    Posts
    18

    Default Re: first build EP45-DS3R issue

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: [auto]
    CPU Clock Ratio ..........................: [9x]
    Fine CPU Clock Ratio.....................: [0.0]
    CPU Frequency ...........................: 3.60GHz (400x9)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: [400 Mhz]
    PCI Express Frequency (Mhz) .........:Set to [100]

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< [800mV]
    PCI Express Clock Drive.................: <<< [900mV]
    CPU Clock Skew (ps)....................: <<< [0ps]
    MCH Clock Skew (ps)...................: <<< [250ps]


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [400MHz]
    System Memory Multiplier ..............: [2.66D]
    Memory Frequency (Mhz) ..............: [1066]
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.............................. 5 [5]
    tRCD ..........................................7 [5]
    tRP'...........................................7 [5]
    tRAS...........................................16 [15]

    Advanced Timing Control
    tRRD...........................................4 [auto]
    tWTR...........................................4 [auto]
    tWR............................................8 [auto]
    tRFC...........................................68 [auto]
    tRTP...........................................4 [auto]
    Command Rate (CMD) ...........................:0 [Auto]


    Channel A timing Settings [Press Enter]
    Static tRead Value.........................:11 [12]
    tRD Phase0 Adjustment...................:0 [auto]
    tRD Phase1 Adjustment...................:0 [auto]
    tRD Phase2 Adjustment .................: 0 [auto]
    tRD Phase3 Adjustment..................:0 [auto]
    Trd2rd(Different Rank)....................:6 [auto]
    Twr2wr(Different Rank)...................: 6 [Auto}
    Twr2rd(Different Rank)...................:5 [auto]
    Trd2wr(Same/Diff Rank)..................:8 [auto]
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto
    DDR Write Training...................... [auto] -- This one wasn't in your template

    Channel A driving Settings [press enter]
    Drive Strength Profile.................. [Auto] -- This one wasn't in your template
    Data Driving Pull-up level.............. [auto]-- This one wasn't in your template
    CMD Driving pull-up Level .............. [auto]-- This one wasn't in your template
    Ctrl Drving pull-up Level............... [auto]-- This one wasn't in your template
    Clk Driving Pull-up Level............... [auto]-- This one wasn't in your template

    Data pull-down Level.................... [auto]-- This one wasn't in your template
    Cmd driving pull-down Level............. [auto]-- This one wasn't in your template
    Ctrl Driving pull-down Level............ [auto]-- This one wasn't in your template
    Ctrl driving Pull-down Level............ [auto]-- This one wasn't in your template
    Clk Driving Pull-down Level............. [auto]-- This one wasn't in your template

    Channel B Timing Settings [press anter]
    Static tRead Value.........................:11 [12]
    tRD Phase0 Adjustment......................:0 [auto]
    tRD Phase1 Adjustment......................:0 [auto]
    tRD Phase2 Adjustment .....................:0 [auto]
    tRD Phase3 Adjustment......................:0 [auto]
    Trd2rd(Different Rank).....................:6 [auto]
    Twr2wr(Different Rank).....................:6 [Auto}
    Twr2rd(Different Rank).....................:5 [auto]
    Trd2wr(Same/Diff Rank).....................:8 [auto]
    Dimm1 Clock Skew Control...................: [Auto]
    Dimm2 Clock Skew Control...................: [Auto]
    DDR Write Training...................... [auto] -- This one wasn't in your template


    Channel B driving Setting [Press Enter]
    Drive Strength Profile.................. [Auto]-- This one wasn't in your template
    Data Driving Pull-up level.............. [auto]-- This one wasn't in your template
    CMD Driving pull-up Level .............. [auto]-- This one wasn't in your template
    Ctrl Drving pull-up Level............... [auto]-- This one wasn't in your template
    Clk Driving Pull-up Level............... [auto]-- This one wasn't in your template

    Data pull-down Level.................... [auto]-- This one wasn't in your template
    Cmd driving pull-down Level............. [auto]-- This one wasn't in your template
    Ctrl Driving pull-down Level............ [auto]-- This one wasn't in your template
    Ctrl driving Pull-down Level............ [auto]-- This one wasn't in your template
    Clk Driving Pull-down Level............. [auto]-- This one wasn't in your template



    *****Motherboard Voltage Control*****
    Voltage Type normal current

    CPU
    CPU Vcore….……….........1.25000V........: [Auto]
    CPU Termination…...... 1.200V..........: [Auto]
    CPU PLL................1.500V..........: [Auto]
    CPU Reference..........0.760V..........: [Auto]
    >>>MCH/ICH
    MCH Core...............1.100V..........: [1.340V]
    MCH Reference..........0.760V..........: [Auto]
    MCH/DRAM Ref...........0.900V..........: [Auto]
    ICH I/O................1.550V..........: [Auto]

    ICH Core...............1.100V..........: --- THIS I DON'T HAVE IN MY BIOS----

    DRAM
    DRAM Voltage...........1.800V..........: [2.100V]
    DRAM Termination......…0.900V..........: [Auto]
    Channel A Reference... 0.900V..........: [Auto]
    Channel B Reference... 0.900V..........: [1.610V]

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled]

    this is what i currently have as my set up
    the Memtest failure i had was with the suggested settings your gave me before :)

  6. #16
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: first build EP45-DS3R issue

    Ya, I leave all those out as they are for super fine tuning.

    Please post for me the settings you tried from my suggested that fail for you. All I can do with the above is make the same suggestions I gave you already. See what I mean?

    Hope so, not trying to sound unhelpful or anything. I just cant advise of why they failed if you dont give me exactly what you set

    Please manually set PLL voltage to Stock NOW as Auto Way overvolts this. Same applies to Vtt, Auto sets it way higher then what will kill a 45nm CPU. For 3.6 you may need 1.24-1.28 maybe less start low as low is best

  7. #17
    Join Date
    Oct 2008
    Posts
    18

    Default Re: first build EP45-DS3R issue

    hey LSD was my settings when i had the fail :)

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: [fast]
    CPU Clock Ratio ..........................: [9x]
    Fine CPU Clock Ratio.....................: [0.5]
    CPU Frequency ...........................: 3.16GHz (333x9.5)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: [333 Mhz]
    PCI Express Frequency (Mhz) .........:Set to [100]

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< [800mV]
    PCI Express Clock Drive.................: <<< [900mV]
    CPU Clock Skew (ps)....................: <<< [0ps]
    MCH Clock Skew (ps)...................: <<< [100ps]


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [333MHz]
    System Memory Multiplier ..............: [3.20B]
    Memory Frequency (Mhz) ..............: [1065]
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.............................. 5 [5]
    tRCD ..........................................7 [5]
    tRP'...........................................7 [5]
    tRAS...........................................16 [18]

    Advanced Timing Control
    tRRD...........................................4 [7]
    tWTR...........................................4 [14]
    tWR............................................8 [18]
    tRFC...........................................68 [80]
    tRTP...........................................4 [8]
    Command Rate (CMD) ...........................:0 [2]


    Channel A timing Settings [Press Enter]
    Static tRead Value.........................:11 [12]
    tRD Phase0 Adjustment...................:0 [auto]
    tRD Phase1 Adjustment...................:0 [auto]
    tRD Phase2 Adjustment .................: 0 [auto]
    tRD Phase3 Adjustment..................:0 [auto]
    Trd2rd(Different Rank)....................:6 [auto]
    Twr2wr(Different Rank)...................: 6 [Auto}
    Twr2rd(Different Rank)...................:5 [auto]
    Trd2wr(Same/Diff Rank)..................:8 [auto]
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto
    DDR Write Training...................... [auto]

    Channel A driving Settings [press enter]
    Drive Strength Profile.................. [1200 O.C]
    Data Driving Pull-up level.............. [auto]
    CMD Driving pull-up Level .............. [auto]
    Ctrl Drving pull-up Level............... [auto]
    Clk Driving Pull-up Level............... [auto]

    Data pull-down Level.................... [auto]
    Cmd driving pull-down Level............. [auto]
    Ctrl Driving pull-down Level............ [auto]
    Ctrl driving Pull-down Level............ [auto]
    Clk Driving Pull-down Level............. [auto]

    Channel B Timing Settings [press anter]
    Static tRead Value.........................:11 [12]
    tRD Phase0 Adjustment......................:0 [auto]
    tRD Phase1 Adjustment......................:0 [auto]
    tRD Phase2 Adjustment .....................:0 [auto]
    tRD Phase3 Adjustment......................:0 [auto]
    Trd2rd(Different Rank).....................:6 [auto]
    Twr2wr(Different Rank).....................:6 [Auto}
    Twr2rd(Different Rank).....................:5 [auto]
    Trd2wr(Same/Diff Rank).....................:8 [auto]
    Dimm1 Clock Skew Control...................: [Auto]
    Dimm2 Clock Skew Control...................: [Auto]
    DDR Write Training...................... [auto]


    Channel B driving Setting [Press Enter]
    Drive Strength Profile.................. [1200 O.C]
    Data Driving Pull-up level.............. [auto]
    CMD Driving pull-up Level .............. [auto]
    Ctrl Drving pull-up Level............... [auto]
    Clk Driving Pull-up Level............... [auto]

    Data pull-down Level.................... [auto]
    Cmd driving pull-down Level............. [auto]
    Ctrl Driving pull-down Level............ [auto]
    Ctrl driving Pull-down Level............ [auto]
    Clk Driving Pull-down Level............. [auto]



    *****Motherboard Voltage Control*****
    Voltage Type normal current

    CPU
    CPU Vcore….……….........1.25000V........: [Auto]
    CPU Termination…...... 1.200V..........: [Auto]
    CPU PLL................1.500V..........: [Auto]
    CPU Reference..........0.760V..........: [Auto]
    >>>MCH/ICH
    MCH Core...............1.100V..........: [1.340V]
    MCH Reference..........0.760V..........: [Auto]
    MCH/DRAM Ref...........0.900V..........: [Auto]
    ICH I/O................1.550V..........: [Auto]



    DRAM
    DRAM Voltage...........1.800V..........: [2.100V]
    DRAM Termination......…0.900V..........: [Auto]
    Channel A Reference... 0.900V..........: [Auto]
    Channel B Reference... 0.900V..........: [Auto]

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled]

    hope this helps :) thanks again for your time
    Last edited by feeblehead; 11-07-2008 at 07:38 AM. Reason: entry not in my bios

  8. #18
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: first build EP45-DS3R issue

    K, see if this helps you out any >>>>

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: [fast]
    CPU Clock Ratio ..........................: [9x]
    Fine CPU Clock Ratio.....................: [0.5]
    CPU Frequency ...........................: 3.16GHz (333x9.5)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: [333 Mhz]
    PCI Express Frequency (Mhz) .........:Set to [100]

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< [800mV]
    PCI Express Clock Drive.................: <<< [900mV]
    CPU Clock Skew (ps)....................: <<< [0ps] 50
    MCH Clock Skew (ps)...................: <<< [100ps] << try 250


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [333MHz] << try 400 w/ 3.33 below for 1108Mhz or Auto with 3.2B
    System Memory Multiplier ..............: [3.33D]
    Memory Frequency (Mhz) ..............: [1108]
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time.............................. 5 [5]
    tRCD ..........................................7 [5]
    tRP'...........................................7 [5]
    tRAS...........................................16 [18]

    Advanced Timing Control
    tRRD...........................................4 [7]
    tWTR...........................................4 [14]
    tWR............................................8 [18]
    tRFC...........................................68 [80]
    tRTP...........................................4 [8]
    Command Rate (CMD) ...........................:0 [2]


    Channel A timing Settings [Press Enter]
    Static tRead Value.........................:11 [12]
    tRD Phase0 Adjustment...................:0 [auto]
    tRD Phase1 Adjustment...................:0 [auto]
    tRD Phase2 Adjustment .................: 0 [auto]
    tRD Phase3 Adjustment..................:0 [auto]
    Trd2rd(Different Rank)....................:6 [auto]
    Twr2wr(Different Rank)...................: 6 [Auto}
    Twr2rd(Different Rank)...................:5 [auto]
    Trd2wr(Same/Diff Rank)..................:8 [auto]
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto
    DDR Write Training...................... [auto]

    Channel A driving Settings [press enter]
    Drive Strength Profile.................. [1200 O.C] Try 1066 on both
    Data Driving Pull-up level.............. [auto]
    CMD Driving pull-up Level .............. [auto]
    Ctrl Drving pull-up Level............... [auto]
    Clk Driving Pull-up Level............... [auto]

    Data pull-down Level.................... [auto]
    Cmd driving pull-down Level............. [auto]
    Ctrl Driving pull-down Level............ [auto]
    Ctrl driving Pull-down Level............ [auto]
    Clk Driving Pull-down Level............. [auto]

    Channel B Timing Settings [press anter]
    Static tRead Value.........................:11 [12]
    tRD Phase0 Adjustment......................:0 [auto]
    tRD Phase1 Adjustment......................:0 [auto]
    tRD Phase2 Adjustment .....................:0 [auto]
    tRD Phase3 Adjustment......................:0 [auto]
    Trd2rd(Different Rank).....................:6 [auto]
    Twr2wr(Different Rank).....................:6 [Auto}
    Twr2rd(Different Rank).....................:5 [auto]
    Trd2wr(Same/Diff Rank).....................:8 [auto]
    Dimm1 Clock Skew Control...................: [Auto]
    Dimm2 Clock Skew Control...................: [Auto]
    DDR Write Training...................... [auto]


    Channel B driving Setting [Press Enter]
    Drive Strength Profile.................. [1200 O.C] << Try 1066 on both
    Data Driving Pull-up level.............. [auto]
    CMD Driving pull-up Level .............. [auto]
    Ctrl Drving pull-up Level............... [auto]
    Clk Driving Pull-up Level............... [auto]

    Data pull-down Level.................... [auto]
    Cmd driving pull-down Level............. [auto]
    Ctrl Driving pull-down Level............ [auto]
    Ctrl driving Pull-down Level............ [auto]
    Clk Driving Pull-down Level............. [auto]



    *****Motherboard Voltage Control*****
    Voltage Type normal current

    CPU
    CPU Vcore….……….........1.25000V........: [Auto]
    CPU Termination…...... 1.200V..........: [Auto] << Set to stock
    CPU PLL................1.500V..........: [Auto] << Set to stock
    CPU Reference..........0.760V..........: [Auto]
    >>>MCH/ICH
    MCH Core...............1.100V..........: [1.340V] << Try less like 1.25
    MCH Reference..........0.760V..........: [Auto]
    MCH/DRAM Ref...........0.900V..........: [Auto]
    ICH I/O................1.550V..........: [Auto]



    DRAM
    DRAM Voltage...........1.800V..........: [2.100V]
    DRAM Termination......…0.900V..........: [Auto]
    Channel A Reference... 0.900V..........: [Auto]
    Channel B Reference... 0.900V..........: [Auto]

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled]

  9. #19
    Join Date
    Oct 2008
    Posts
    18

    Default Re: first build EP45-DS3R issue

    thanks LSD i'm just at work so i'll try the new settings later today once i get home and let you know...

  10. #20
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

Page 2 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •