Could put bios for GA-Z170N-Gaming 5 (rev. 1.0)?
IO Apic unlock and MSR E2
Could put bios for GA-Z170N-Gaming 5 (rev. 1.0)?
IO Apic unlock and MSR E2
GA-Z170N-Gaming 5
F4b
F4c
Edit:
Intel-skylake-non-k-overclocking-BIOS-list:
Intel Skylake Non-K Overclocking BIOS-List | Overclocking.Guide
......
Known issue if overclocking by BCLK:
1. NO AVX Support
2. CPU Die temperature reading incorrect
3. No integrated GPU support
4. C state / Windows Power management not fully supported
Last edited by stasio; 12-30-2015 at 04:19 PM.
Z390 AORUS Master,
GA-Z170X-SOC Force , Kaby Lake...
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 8.1 x64;Win 10 x64
I just wanted to say that F5g bios for the Z170-hd3p is AMAZING...
In both F6 as well as F7b, killer e2400 LAN card comes back after suspend/resume even though it's disabled in the BIOS.
I have Z170 Gaming7
Presumably you are talking about the BCLK overcling right? BTW there was released the next day a slightly newer revision of that on Page 1 here --> F5h http://forums.tweaktown.com/gigabyte...tml#post267527
Gaming 7 with bios F6K-F6-F7A with 6.700K and Xyperx Fury HX426C15FBK2/16 16GB (2 x 8GB) DDR4-2666 1.2v
Tested..
XPM on slot 1-3 default speed 26.66 = errors on mem test,gaming crash
XPM on slot 2-4 default speed 26.66 = errors on mem test,gaming crash
XPM off slot 1-3 default speed 26.66 Ram Voltage: 1.300v VCCIO/SA: 1.150v = errors on mem test,gaming crash
XPM off slot 2-4 default speed 26.66 Ram Voltage: 1.300v VCCIO/SA: 1.150v = errors on mem test,gaming crash
XPM off slot 1-3 default speed 26.66 Ram Voltage: 1.340v VCCIO/SA: 1.150v/1.200 = errors on mem test,gaming crash
XPM off slot 2-4 default speed 26.66 Ram Voltage: 1.340v VCCIO/SA: 1.150v/1.200 = errors on mem test,gaming crash
XPM off slot 1-3 speed 24.00 Ram Voltage: 1.340v VCCIO/SA: 1.150v/1.200 = errors on mem test,gaming crash
XPM off slot 2-4 speed 24.00 Ram Voltage: 1.340v VCCIO/SA: 1.150v/1.200 = errors on mem test,gaming crash
XPM off slot 1-3 speed 21.33 Ram Voltage: default (1.200v) VCCIO/SA: default (1.060v/0.960) = NO ERROR-STABLE
XPM off slot 2-4 speed 21.33 Ram Voltage: default (1.200v) VCCIO/SA: default (1.060v/0.960) = NO ERROR-STABLE
Note ..when i try to put manual memory settings (not the defaults )i have post bios error 40
All the rest motherboard settings at defaults.
Any help to get this running at default speed STABLE ?????
Last edited by bloodmaster; 12-29-2015 at 07:38 PM.
.
Last edited by mh272; 12-31-2015 at 02:41 PM.
^
K or non-K CPU ?
Edit:
As today BIOS updates....
GA-Z170X-SOC Force - F6f
GA-Z170X-Gaming G1 - F7c
GA-Z170X-Gaming GT - F6c
GA-Z170X-Gaming 7 - F7d
GA-Z170X-Gaming 5 - F5g
GA-Z170X-Gaming 3 - F5j
GA-Z170X-UD5 - F5i
GA-Z170X-UD3 - F5f
GA-Z170XP-SLI - F6g
got some restrictions as follows:
1. Support non K SKU Overclocking via BCLK
2. CPU Flex ration limited to x8 or stock
3. Support memory divider odd ratios (x0.5), such as 2533 and 3600
4. Defaults setting as regular bios with all functions and features.
Known issue if overclocking by BCLK:
1. NO AVX Support
2. CPU Die temperature reading incorrect
3. No integrated GPU support
4. C state / Windows Power management not fully supported
Last edited by stasio; 12-30-2015 at 04:43 PM.
Z390 AORUS Master,
GA-Z170X-SOC Force , Kaby Lake...
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 8.1 x64;Win 10 x64
Quick question for Z170X - Gaming-7 Board. Latest BIOS released is F6, I'm currently running the F6f Beta, which allowed XMP to work correctly with my RAM. Does the F6 release also have the added XMP compatibility that F6f had?
Is there release notes for BIOS versions somewhere? I've been trying to locate them, but can't seem to.
Thanks.
There are currently 424 users browsing this thread. (6 members and 418 guests)