GIGABYTE Latest Beta BIOS

[LucasFrance]

I think that you will find that code 47 just indicates that you have DAC-UP enabled.

Thanks but there is no DAC-UP on the Xtreme motherboard (as far as I know). So I think the "Code 47" in place of "A0" is a bug on the F7b beta BIOS.

[4Fighting]

Hello

Is there any bios for Aorus z390 Ultra that has IO Latency offset option?
And if not, how is it possible to manually change RTL and IOL settings in current F7 bios - as simple numbers changing actually has no effect?

Thanks

Still broken on 9c - is this somehow intended or will it be fixed?
The "stock" IOLs are way too high

[LucasFrance]

I think that you will find that code 47 just indicates that you have DAC-UP enabled.

There is no DAC-UP on the Xtreme motherboard... so the code 47 seems to be a bug on the F7b beta for this board.

[LucasFrance]

I think that you will find that code 47 just indicates that you have DAC-UP enabled.

There is no DAC-UP on the Xtreme board...

[steve3d]

on z390 aorus master with latest f8 bios, q-fan settings can not be saved, what ever the settings I changed, after reboot, it always revert to default settings.

[TrebleTA]

Check you don't have the sensor connected to the cmos pins by mistake?

Else ya have to contacted gigabyte support, thats if you mean the bios smart fans, in bios f8 the fans setting for me was getting saved just what was saved was wrong. In f9b a lot of this was fixed

Code 47 is something related to gigabyte software. Uninstall should sort it

[Yemble]

There is no DAC-UP on the Xtreme board...

Sorry, I just assumed that the Xtreme functionality was a super-set of the Master. In any case, DAC-Up is definitely what triggers code 47 on the Master.

[steve3d]

Check you don't have the sensor connected to the cmos pins by mistake?

Else ya have to contacted gigabyte support, thats if you mean the bios smart fans, in bios f8 the fans setting for me was getting saved just what was saved was wrong. In f9b a lot of this was fixed

Code 47 is something related to gigabyte software. Uninstall should sort it

what do you mean sensor connected to cmos pin? I can see my fans speed, my fan are pwm fans, I just want to change the fan mode from quiet to normal, after I change the mode, save, enter bios, the settings are still quiet, and all my curve adjustment are set back to the default curve.

this also happens to z390 designare bios f6.

[TrebleTA]

On the master, Some have connected the ec temp sensor to the two pin cmos, as the ec temp pins are close together, yet this would reset all bios settings not just the smart fans. Not sure on other boards. But I am on f9c now as in f8 I was getting problems they did fix a lot in the f9b for me, since f9b I get this problem Fan 3 restart spin - YouTube

[templ]

Aorus Ultra F8b
changelog:
now CPU - TDP limit actually works :)


after flashing got just blinking RGB without post or reaction to power button... or anything after 2x PSU off for 30 sec it booted ok..
now it works..