GIGABYTE Latest Beta BIOS

[saboid]

Hello guys I have a probllema trying to update my bios rev2 UD7 going from FD3 to fd9 using the progam @Bios fd9 the ROM BIOS does not recognize the same with Winflash which may be the problem? thanks


Immage problem

[peppercute]

Beta BIOS update for GA-X58A-UD7 Rev. 1.0 F8o

X58A-UD7-F8o.zip

Wthat about a mod version of thix?

[Syncmahv]

Yeh I installed the Beta to try and solve an audio issue.

I started updating my bios also. And ended up with same problem... Audio issues, crackling all the time, Even bought new sound card. STILL same problem. Issues started after updating bios. But if i tryed older versions, then no help.

So can someone help?
GA-EX58-UD5 (v1.0) BIOS (f13j)

[folklore]

any improvement noticed over F8K ? Not tried any others

Beta BIOS update for GA-X58A-UD7 Rev. 1.0 F8o

X58A-UD7-F8o.zip

Change log: Correct hang at IDE Detection with Crucial C300 if firmware bypass mode selected with disk on Marvell port 7
(This may apply to other SSD/HDD as well) - Please Force Update Marvell Firmware with this update


If you are affected by the above issue, please see my suggested update method here
F8M is unstable

[Lsdmeasap]

Yes, to the users having issue with larger BIOS sizes, you must use @BIOS or SPIFlash to flash the larger file sizes, then you can use Qflash after that as you normally should.

Saboid, and any others with @BIOS issues, please be sure you are using the latest @BIOS (You have to uninstall old before you install new).

Latest is available here
GIGABYTE - Support & Downloads - Utility - Motherboard



Beta BIOS update for GA-X58A-UD9 F9q
X58A-UD9-F5q.zip

Change log: Correct hang at IDE Detection with Crucial C300 if firmware bypass mode selected with disk on Marvell port 7
(This may apply to other SSD/HDD as well) - Please Force Update Marvell Firmware with this update

If you are affected by the above issue, please see my suggested update method here
F8M is unstable

[Pablo]

Thanks for ud9 bios, will install/update tonight, cant do it with 10 mins till work time, dont wanna screw it up as such.

Thanks again.

Will post with results, no doubt.

[Lsdmeasap]

Good luck Pablo, hope it works - it should but I just said that because I can't actually test that one myself :)

0007 firmware out eh? Thanks, was just heading over to their forum

[Lsdmeasap]

I am VIP there, so I knew it was coming a while back, just been offline for a few days so I missed it :)

Updating a C300 RAID array now, then I'll post my USB updater over there for everyone.

Hopefully this fixes the issues for everyone that was affected by the freezing or stuttering in OS.

[Lonelobo]

can som1 make a modde dbios for the X58A-UD9 based on latest biozs posted a few post above with latest lan+intel rom? Tnx in advance

[Pablo]

yeah, typical firmware 007 and new ud9 bios, both which need care to update, and i only had 10 minutes to spare,

Will prob update ssd first, just coz its a good idea, even though isnt part of the bios issues.