Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 666 of 1088 FirstFirst ... 166566616656664665666667668676716766 ... LastLast
Results 6,651 to 6,660 of 10874

Thread: GIGABYTE Latest Beta BIOS




  1. #6651
    Join Date
    May 2012
    Location
    A, A
    Posts
    19

    Default Re: GIGABYTE Latest Beta BIOS

    Quote Originally Posted by lockian View Post
    Backing up dazboot's findings - once again the Sniper 2 on a 2600k does not have working voltage controls or any load line calibration. Possibly this issue only now affects Sandybridge processors. Either way this is completely ridiculous. A while back a representative from Gigabyte promised us that the Sniper 2 would be one of the first in line for the whole UEFI update with an estimated date passed many months ago now for it's release. It now seems Gigabyte is focusing mainly on this years boards and totally forgetting the fact that many of us purchased premium boards such as the Sniper 2 under the stated pretence of full Ivy Bridge support and a UEFI bios. The message this puts out to me is that they are neither happy to honour their commitments nor to correctly support their products after only one generation of succession.

    I have Tried everything to even removing bios battery. must have flashed about 15 times now, anyways writing another email to the people from who i bought this board from, will not say where but i have had about enough of this board and a 99.00 would do much better than this. hate it with a passion. thank you for replying was thinking i was doing something wrong :(

  2. #6652
    pyronical's Avatar
    pyronical is offline Junior Member
    Join Date
    May 2012
    Location
    Auckland, New Zealand
    Posts
    21

    Default Re: GIGABYTE Latest Beta BIOS

    Are you using a Sandy Bridge processor, daz?

  3. #6653
    Join Date
    May 2012
    Location
    A, A
    Posts
    19

    Default Re: GIGABYTE Latest Beta BIOS

    Quote Originally Posted by pyronical View Post
    Are you using a Sandy Bridge processor, daz?
    Ivy Bridge 3770k

  4. #6654
    pyronical's Avatar
    pyronical is offline Junior Member
    Join Date
    May 2012
    Location
    Auckland, New Zealand
    Posts
    21

    Default Re: GIGABYTE Latest Beta BIOS

    Weird, maybe our boards and/or processors are different revisions or something.

  5. #6655
    Jason A Thomas is offline Junior Member
    Join Date
    Sep 2012
    Location
    Maryborough, Victoria, Australia
    Posts
    11

    Default Re: GIGABYTE Latest Beta BIOS

    I have a GA-Z68X-UD7 motherboard and the F10 bios isn't the best released IMO the F10 beta worked better but was not as stable when over clocking but at least the manual ram timings worked correctly if I use the manual setting's in the full F10 BIOS my rig lock's at post and I'm using the exact same setting's as the XMP profile anyway thats not what I wish to ask.

    How long before F11 will be released?
    Will The Z68X-UD7 get a UEFI bois?

    Any INFO would be great!

  6. #6656
    Join Date
    Feb 2012
    Location
    Spain
    Posts
    12

    Default Re: GIGABYTE Latest Beta BIOS

    Ok ppl,

    Z68X-UD4-B3 user here. It's been about a week using U1C bios, and I finally achieved to get to 4.5Ghz with 2600k using Vcore and Offset, due to the lack of LLC Support in this bios.

    As far as I've tested, system runs ok. No more cold boot issues. OS initiates faster with UEFI. Dolby sound works out of the box.

    So, for Z68X-UD4, should be only a matter of time to get LLC setting and job done.

  7. #6657
    Join Date
    May 2012
    Location
    A, A
    Posts
    19

    Default Re: GIGABYTE Latest Beta BIOS

    Thank you Stasio for sending me the new bios with new Cpu code but still the same no vcore. disabled iest and c1 states still same. just taken the cpu out the socket to make sure there is no bent pins in the socket and it spot on. this looks like to be a dodgy board. will be sending it back. thank you again ;) run out of options now.
    this board has not been overclocked using this cpu and purchased the cpu april 29th. ivy bridge. not been able to push it at all. :(
    Last edited by dazboots; 10-01-2012 at 10:42 PM.

  8. #6658
    stasio's Avatar
    stasio is offline GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,694

    Default Re: GIGABYTE Latest Beta BIOS

    dazboots,

    did you try overclock by ET6 or GTL?
    Last edited by stasio; 10-01-2012 at 11:23 PM.
    Z370 AORUS Gaming 7,
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  9. #6659
    Join Date
    May 2012
    Location
    A, A
    Posts
    19

    Default Re: GIGABYTE Latest Beta BIOS

    Tried overclocking with turbo on and off and tried with eist and c1 on and off still same. only tried altering voltages in bios only. not used any windows software. looks like a bad board to me.

  10. #6660
    stasio's Avatar
    stasio is offline GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,694

    Default Re: GIGABYTE Latest Beta BIOS

    So,with ET6 you can push your 3770k up to 4.68GHz.
    Z370 AORUS Gaming 7,
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

Thread Information

Users Browsing this Thread

There are currently 178 users browsing this thread. (3 members and 175 guests)

  1. AudiTuner,
  2. Mecgyver,
  3. Mseirco

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •