Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 899 of 1087 FirstFirst ... 399799849889897898899900901909949999 ... LastLast
Results 8,981 to 8,990 of 10866

Thread: GIGABYTE Latest Beta BIOS




  1. #8981
    Dodge0100 is offline Junior Member
    Join Date
    Mar 2014
    Location
    UK
    Posts
    1

    Default Re: GIGABYTE Latest Beta BIOS

    Hi just trying to get a good overclock on my 4820K with a x79-up4. i have tried all 3 bioses and cant get past a boot failure detected when i start my machine.

    my oc settings are

    Multi 45x
    cpu voltage 1.335
    ram XMP 1600 @ 1.65v
    Load Line on High
    Phase control on Perf

    C1E off
    C3 off
    C6/C7 off

    all other voltage are on Auto

    these settings are stable with prime for 24 hours but every time i start my machine i have to load my saved profile to get into windows. any help would be much appreciated

    Thanks Dodge0100 :)

  2. #8982
    Join Date
    Sep 2013
    Location
    Germany
    Posts
    26

    Default Re: GIGABYTE Latest Beta BIOS

    Quote Originally Posted by ntman View Post
    I think you need to contact Gigabyte support on their website, open a tech support ticket with them, not only mention your problem here. We are just users talking to each other and this here is Stasio's thread where he collects every BIOS version he finds.

  3. #8983
    boe323 is offline Member
    Join Date
    Jul 2011
    Location
    United Kingdom
    Posts
    476

    Default Re: GIGABYTE Latest Beta BIOS

    Quote Originally Posted by Dodge0100 View Post
    Hi just trying to get a good overclock on my 4820K with a x79-up4. i have tried all 3 bioses and cant get past a boot failure detected when i start my machine.

    my oc settings are

    Multi 45x
    cpu voltage 1.335
    ram XMP 1600 @ 1.65v
    Load Line on High
    Phase control on Perf

    C1E off
    C3 off
    C6/C7 off

    all other voltage are on Auto

    these settings are stable with prime for 24 hours but every time i start my machine i have to load my saved profile to get into windows. any help would be much appreciated

    Thanks Dodge0100 :)
    your not alone on this one ...g1assassin2 does the same thing ....but all I do is exit normally and reboot. Votlage seems a little steep for x45 though ...im running at 1.246
    Last edited by boe323; 03-11-2014 at 09:05 PM.
    A WHOLE LOT OF NOTHING WORKS PROPERLY

  4. #8984
    ph34rb0t is offline Junior Member
    Join Date
    Mar 2014
    Location
    GER
    Posts
    2

    Default Re: GIGABYTE Latest Beta BIOS

    Hello.

    Is there a beta BIOS for the Z87-DS3H as well?

  5. #8985
    stasio's Avatar
    stasio is online now GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,692

    Default Re: GIGABYTE Latest Beta BIOS

    Quote Originally Posted by ph34rb0t View Post
    Hello.

    Is there a beta BIOS for the Z87-DS3H as well?
    Z87DS3H.3a
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  6. #8986
    Join Date
    Mar 2014
    Location
    France
    Posts
    7

    Default Re: GIGABYTE Latest Beta BIOS

    Quote Originally Posted by stasio View Post
    No idea how I can save my P67A-UD7-B3 ?

    Thanks!

  7. #8987
    stasio's Avatar
    stasio is online now GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,692

    Default Re: GIGABYTE Latest Beta BIOS

    Quote Originally Posted by webzeb View Post
    No idea how I can save my P67A-UD7-B3 ?

    Thanks!
    Are you done (flashing) as instructed....?

    Backup BIOS start:
    It is possible to make the BIOS Auto-Recovery kick in (Dual BIOS) and re-flash the MAIN BIOS with the contents of the BACKUP BIOS.

    This is a simple and easy method for anyone to try before having to resort to other more difficult methods, or a RMA.

    1. Shut off the power supply using the switch on the back of the PSU, wait 10-15 seconds.
    2. Press and hold the case Power On switch, then while still holding turn on the power supply from the switch on the rear.
    3. Still holding the case power on switch, the board will start, once it does release the case power on switch and
    shut off the power supply via the switch on the rear of the unit.
    (Do the latter two parts as quickly as you can once the board starts)
    4. The board will shut down.
    5. Turn the power supply back on using the switch on the rear of the unit.
    6. Turn on the motherboard by pressing the case power on button.

    Once the board starts this time you should see the Gigabyte splash screen, or POST page, then the Auto-Recovery from Dual BIOS will kick in.
    You will see a checksum error, and then recovery from BACKUP BIOS will begin. Once it is done reboot your machine and enter the BIOS
    and load optimized defaults then save/apply/reboot back to BIOS.

    Now you are done, and will be using whatever BIOS was in your BACKUP BIOS, From there you can attempt whatever you were previously trying,
    or update your BIOS to the latest version.


    Press together(hold) power and reset button.
    ===============================================

    Method #1:
    1. Shut your PC down (if you're reading this guide, than your PC isn't working anyways)
    2. Hold the power button until the PC starts and shuts down again
    3. Press the power button again, your backup BIOS should kick in now and
    should re-flash the main BIOS if there's anything wrong with it.

    Method #2:
    1. Shut your PC down
    2. Hold the power AND the reset button for about 10 sec, than release.
    3. Backup BIOS should kick in anytime soon now.
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  8. #8988
    Join Date
    Oct 2013
    Location
    Germany
    Posts
    4

    Default Re: GIGABYTE Latest Beta BIOS

    Any chance there is a F9x for the Sniper M5 already?

    Rgds,

    Jens
    gigabyte g1.sniper z87 | intel core i5-4670k @h2o | crucial ballistix tactical tracer | sapphire r9 290 @h2o | toshiba q | samsung ssd 840 evo | wd velociraptor | lg bh16ns40 | enermax platimax | corsair carbide series air 540

  9. #8989
    stasio's Avatar
    stasio is online now GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,692

    Default Re: GIGABYTE Latest Beta BIOS

    Quote Originally Posted by JePeT View Post
    Any chance there is a F9x for the Sniper M5 already?

    Rgds,

    Jens
    Not yet.
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  10. #8990
    Join Date
    Mar 2014
    Location
    France
    Posts
    7

    Default Re: GIGABYTE Latest Beta BIOS

    Quote Originally Posted by stasio View Post
    Are you done (flashing) as instructed....?

    Backup BIOS start:
    Hello!

    After many retries, I did manage to kick bios recovery.
    It seems I wasn't quick-enough at shutting down the power supply when the board started...

    However, I do have problems installing the F6c modded BIOS.
    After flashing with @BIOS and restarting, the board power on just two seconds, then restarts, shows splash screen and goes to BIOS recovery. (Saying BIOS checksum error...)

    What I do :
    - start the PC
    - enter BIOS
    - load Optimized Defaults
    - disable GSATA controller
    - disable eSATA controller
    - save and exit BIOS
    - start Windows 8
    - start last version of @BIOS
    - untick load CMOS defaults
    - choose update BIOS from a file
    - load the F6c modded bios you provided
    - start the BIOS update
    - restart

Thread Information

Users Browsing this Thread

There are currently 187 users browsing this thread. (2 members and 185 guests)

  1. AudiTuner,
  2. stasio

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •