Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: mix 2.0v 2.2v ram on GA-P35-DS3L?




  1. #1
    Join Date
    Nov 2008
    Posts
    1

    Default mix 2.0v 2.2v ram on GA-P35-DS3L?

    I have a GA-P35-DS3L based system that I built last year with two 1GB sticks of crucial RAM in slots 1 & 3; they run in dual mode. The mem is BL2KIT12864AA804 which is rated at 2.2V. Currently FRY's is offering the similar, newer BL2KIT12864AA80A for $8 after rebate but it is rated at 2.0V. If I were to install that in dual mode in slots 2 & 4, would the SPD set two different optimum voltages automatically or would I be setting myself up for trouble? Thanks.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: mix 2.0v 2.2v ram on GA-P35-DS3L?

    You could, usually not a good idea to mix different batches of even the same ram.......

    But that older 2.2V ram can and should always be ran at 2.0-2.1 anyway. So you may be just fine

    That 2.2 is the max warrantied, not what you need to run them anyway

    Yes the SPD would likely try to set tow different values for timings and or voltages if you use AUTO, so you may have to setup things all manually. Which I would suggest you do anyway as with 4x1 you would likely have to even if they all matched (At least it would be best to)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •