Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 32

Thread: first time user with ep45 ds3l




  1. #11
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: first time user with ep45 ds3l

    Yeap, but if Legacy USB Storage detect is disabled you will need to reboot again before you go into Qflash

    All good, after you load optimized set your ram voltage and reboot back to the bios and set your SATA and boot order settings then anything else you want to do and you will be all good

  2. #12
    Join Date
    Nov 2008
    Posts
    71

    Default Re: first time user with ep45 ds3l

    do i still have to follow the instructions with typing in flashsp1.exe and ep45ds3l.exe in the command thing? and its ok that i installed vista first right?
    and can you give me like specific step by step instructions. lol.....sorry but this is my first tim flashing and i want to get it right and not kill the mobo
    Last edited by wutsup; 11-07-2008 at 04:36 PM.

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: first time user with ep45 ds3l

    No, all that is for DOS flashing with Floppy

    Qflash is a GUI interface you will browse to your USB as shown in that guides images and select your BIOS file and flash

    Very simple

  4. #14
    Join Date
    Nov 2008
    Posts
    71

    Default Re: first time user with ep45 ds3l

    i cant find the legacy usb storage detect in the bios where exactly is it?

    nevermid found it its already enabled so iguess i just have to do it and ill tell you how it goes.
    Last edited by wutsup; 11-07-2008 at 05:09 PM.

  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  6. #16
    Join Date
    Nov 2008
    Posts
    71

    Default Re: first time user with ep45 ds3l

    lol i did it thanks for the help so after i flashed the computer like turned of ffor a few seconds then came back on then i went back into bios and load optimized defaults and then save and exit. thats correct right? and then i changed the dram voltag to 2.1 but the speed of the ram is still 800mhz when its suppose to be 1066mhz

  7. #17
    Join Date
    Nov 2008
    Posts
    71

    Default Re: first time user with ep45 ds3l

    bumpp

  8. #18
    Join Date
    Nov 2008
    Posts
    5

    Default Re: first time user with ep45 ds3l

    Quote Originally Posted by wutsup View Post
    lol i did it thanks for the help so after i flashed the computer like turned of ffor a few seconds then came back on then i went back into bios and load optimized defaults and then save and exit. thats correct right? and then i changed the dram voltag to 2.1 but the speed of the ram is still 800mhz when its suppose to be 1066mhz

    Did you get the speed @ 1066? I am doing the same thing as we speak and mine fails to archive the 1066 settings.

  9. #19
    Join Date
    Nov 2008
    Posts
    71

    Default Re: first time user with ep45 ds3l

    i dont even know what to do in the bios thats why im asking

  10. #20
    Join Date
    Nov 2008
    Posts
    5

    Default Re: first time user with ep45 ds3l

    This is what I got from our Sticky

    "DDR2 OverVoltage Control__ [+0.1] <-- default is 1.8V, 1.8 + 0.1V = 1.9V set this to add up to your ram's manufacturers stock voltage requirement. This example shows my Corsair XMS at 1.9V stock."

Page 2 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •