Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 32

Thread: first time user with ep45 ds3l




  1. #21
    Join Date
    Nov 2008
    Posts
    5

    Default Re: first time user with ep45 ds3l

    I'm at work now so I cant test this until I get home.

  2. #22
    Join Date
    Nov 2008
    Posts
    71

    Default Re: first time user with ep45 ds3l

    hey blayne what do i do to make my ram run at 1066 instead of 8000mhz?
    the system multiplier is confusing. right now it say 800 auto. and i know you should set it to standard instead of turbo and my Frontsidebus is running at 266 i have a q6600

  3. #23
    Join Date
    Nov 2008
    Posts
    5

    Default Re: first time user with ep45 ds3l

    Same reason I'm here. I followed the same steps you were told. Wanting to utilize the 1066 from the XMS2 TWIN2X4096-8500C5 I have 8 gigs I want to unleash I'll keep you posted.

  4. #24
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: first time user with ep45 ds3l

    You guys both need to set your ram voltage and then change the system memory mulltiplier to use 1066 speed on your ram. Which to choose depends on your FSB used.


    If you have a 333 FSB this is what you would choose >>>>

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 3.20B = 1066 (333 FSB X Memory Multi 3.20 =1066)

  5. #25
    Join Date
    Nov 2008
    Posts
    71

    Default Re: first time user with ep45 ds3l

    so for me i have 2x2gb ocz gold series 1066

    i would set the dram voltage to 2.1 and then im running stock speeds with the q6600 so 266 x4.00A and what about the cas latency and stuff do i mannually set it to 5 6 6 18 or keep it on auto. and do i need to change the mch core voltage? yea thanks for replying to every reply lol and i saw your other reply on the other thread i replied. i said cpu z was only showing the memory at 533 mhz. but the Ram SPd was at 400mhz. thats normal right?

  6. #26
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: first time user with ep45 ds3l

    Set your main timings to what it says on the sticker of your ram. And set trfc to 52-62. And yes you likely will need 1.15-1.23 MCH voltage to get stable.

  7. #27
    Join Date
    Nov 2008
    Posts
    71

    Default Re: first time user with ep45 ds3l

    and after i do use will the cpu temp rise slighty? and the cpu Z ram speed is wrong right?

  8. #28
    Join Date
    Nov 2008
    Posts
    71

    Default Re: first time user with ep45 ds3l

    ok so i changed the settings so its 1066. but i didnt change the mch voltage and it booted up fine. what can i do to test it to make sure its stable

  9. #29
    Join Date
    Nov 2008
    Posts
    71

    Default Re: first time user with ep45 ds3l

    ok so now my fsb:dram ratio is 1:2? is that bad

  10. #30
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

Page 3 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •