Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 43

Thread: several problems with a new EP43-DS3




  1. #31
    Join Date
    Nov 2008
    Posts
    26

    Default Re: several problems with a new EP43-DS3

    Here's the values that I copied this morning:
    (i didn't update yet any of the values you gave me, still working with a single 2GB stick)

    I'll have to split it into 2 message since i'm passing th 10K characters
    Code:
    MB Intelligent Tweaker(M.I.T.)<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    Robust Graphics Booster ...............: Auto<o:p></o:p>
    CPU Clock Ratio ..........................: 8<o:p></o:p>
    Fine CPU Clock Ratio.....................:.+0.5<o:p></o:p>
    CPU Frequency ...........................: 2.83 (333*8.5)<o:p></o:p>
    <o:p></o:p>
    <o:p></o:p>
    Clock Chip Control <o:p></o:p>
    Standard Clock Control<o:p></o:p>
    CPU Host Clock Control..................: [Disabled] <o:p></o:p>
    CPU Host Frequency (Mhz) ............: 333Mhz<o:p></o:p>
    PCI Express Frequency (Mhz) .........:Auto<o:p></o:p>
    C.I.A.2 .................................:[Disabled]<o:p></o:p>
    <o:p></o:p>
    <o:p></o:p>
    Advanced Clock Control [Press Enter]<o:p></o:p>
    <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:Street w:st="on"><st1:address w:st="on">CPU Clock Drive</st1:address></st1:Street>...........................: 800mV<o:p></o:p>
    <st1:Street w:st="on"><st1:address w:st="on">PCI Express Clock Drive</st1:address></st1:Street>.................: 900mV<o:p></o:p>
    CPU Clock Skew (ps)....................: 0<o:p></o:p>
    MCH Clock Skew (ps)...................: 0<o:p></o:p>
    <o:p></o:p>
    <o:p></o:p>
    DRAM Performance Control<o:p></o:p>
    Performance Enhance...................: TURBO<o:p></o:p>
    Extreme Memory Profile (X.M.P.).....: Auto<o:p></o:p>
    (G)MCH Frequency Latch...............: Auto<o:p></o:p>
    System Memory Multiplier ..............: Auto<o:p></o:p>
    Memory Frequency (Mhz) ..............: 800<o:p></o:p>
    DRAM Timing Selectable ................: Auto<o:p></o:p>
    <o:p></o:p>
    Standard Timing Control<o:p></o:p>
    CAS Latency Time........................4<o:p></o:p>
    tRCD .........................................4<o:p></o:p>
    tRP'...........................................4<o:p></o:p>
    tRAS..........................................12<o:p></o:p>
    <o:p></o:p>
    Advanced Timing Control<o:p></o:p>
    tRRD...........................................3 Auto<o:p></o:p>
    tWTR..........................................3 Auto<o:p></o:p>
    tWR............................................10 Auto<o:p></o:p>
    tRFC...........................................52 Auto<o:p></o:p>
    tRTP...........................................3 Auto<o:p></o:p>
    Command Rate (CMD) ....................:0 Auto<o:p></o:p>
    <o:p></o:p>

  2. #32
    Join Date
    Nov 2008
    Posts
    26

    Default Re: several problems with a new EP43-DS3

    and here it continues:

    Driving Strength Profiles<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    Driving Strength ............................ Auto <o:p></o:p>
    All values in sub menu are set to AUTO, both for channel A and channel B<o:p></o:p>
    <o:p></o:p>
    Channel A<o:p></o:p>
    Static tRead Value.........................:7 Auto<o:p></o:p>
    tRD Phase0 Adjustment...................:0 Auto<o:p></o:p>
    tRD Phase1 Adjustment...................:0 Auto<o:p></o:p>
    tRD Phase2 Adjustment .................:0 Auto<o:p></o:p>
    tRD Phase3 Adjustment..................:0 Auto<o:p></o:p>
    Trd2rd(Different Rank)....................:6 Auto <o:p></o:p>
    Twr2wr(Different Rank)...................:6 Auto <o:p></o:p>
    Twr2rd(Different Rank)...................:5 Auto <o:p></o:p>
    Trd2wr(Same/Diff Rank)..................:8 Auto <o:p></o:p>
    Dimm1 Clock Skew Control...............:Auto<o:p></o:p>
    Dimm2 Clock Skew Control...............:Auto<o:p></o:p>
    <o:p></o:p>
    Additional: DDR Write Training……………… : Auto<o:p></o:p>
    <o:p></o:p>
    Channel B<o:p></o:p>
    Static tRead Value.........................:7 Auto<o:p></o:p>
    tRD Phase0 Adjustment...................:0 Auto<o:p></o:p>
    tRD Phase1 Adjustment...................:0 Auto<o:p></o:p>
    tRD Phase2 Adjustment .................:0 Auto<o:p></o:p>
    tRD Phase3 Adjustment..................:0 Auto<o:p></o:p>
    Trd2rd(Different Rank)....................:6 Auto <o:p></o:p>
    Twr2wr(Different Rank)...................:6 Auto <o:p></o:p>
    Twr2rd(Different Rank)...................:5 Auto <o:p></o:p>
    Trd2wr(Same/Diff Rank)..................:8 Auto <o:p></o:p>
    Dimm1 Clock Skew Control...............:Auto<o:p></o:p>
    Dimm2 Clock Skew Control...............:Auto <o:p></o:p>
    <o:p></o:p>
    Additional: DDR Write Training……………… : Auto<o:p></o:p>
    <o:p></o:p>
    <o:p></o:p>
    Motherboard Voltage Control<o:p></o:p>
    Voltage Type.………... no such setting<o:p></o:p>
    All values below are in auto mode<o:p></o:p>
    CPU<o:p></o:p>
    CPU Vcore….……….........................: 1.25V<o:p></o:p>
    CPU Termination…............: 1.2V<o:p></o:p>
    CPU PLL…………………...........: 1.5V<o:p></o:p>
    <o:p></o:p>
    CPU Referen.…………...........: 0.76V<o:p></o:p>
    <o:p></o:p>
    CPU Reference2………,,.. . . . . . : no such setting <o:p></o:p>
    <o:p></o:p>
    MCH/ICH<o:p></o:p>
    MCH Core……………................: 1.100V <o:p></o:p>
    MCH Reference….……............; 0.76V<o:p></o:p>
    MCH/DRAM Ref.….................: 0.900V<o:p></o:p>
    ICH I/O……………….................: 1.550V<o:p></o:p>
    ICH Core…………...……............: no such setting<o:p></o:p>
    <o:p></o:p>
    DRAM<o:p></o:p>
    DRAM Voltage ……................: 1.800V<o:p></o:p>
    DRAM Termination .…............: 0.900V<o:p></o:p>
    Channel A Reference ............: 0.900V<o:p></o:p>
    Channel B Reference ............: 0.900V<o:p></o:p>
    <o:p></o:p>
    Advanced Settings – I'll have to update thes values later.<o:p></o:p>
    Limit CPUID Max. to 3.....................: []<o:p></o:p>
    No-Execute Memory Protect............: []<o:p></o:p>
    CPU Enhanced Halt (C1E)................: []<o:p></o:p>
    C2/C2E State Support....................: []<o:p></o:p>
    x C4/C4E State Support..................: []<o:p></o:p>
    CPU Thermal Monitor 2(TM2) ...........: []<o:p></o:p>
    CPU EIST Function.........................: []<o:p></o:p>
    Virtualization Technology................: [] <o:p></o:p>

  3. #33
    Join Date
    Nov 2008
    Posts
    26

    Default Re: several problems with a new EP43-DS3

    here are the missing parameters:

    Advanced Settings

    Limit CPUID Max. to 3.....................: [] Disabled
    No-Execute Memory Protect............: [] DEnabled
    CPU Enhanced Halt (C1E)................: [] Enabled
    C2/C2E State Support....................: [] no such thing
    x C4/C4E State Support..................: [] no such thing
    CPU Thermal Monitor 2(TM2) ...........: [] Enabled
    CPU EIST Function.........................: [] Enabled
    Virtualization Technology................: [] Enabled

  4. #34
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: several problems with a new EP43-DS3

    10000 char limit! You should not be hitting that with only a BIOS post! That seems odd?

    Maybe the font changes and all that you are trying?

    Anyhow, what are you trying to get setup here now both sticks or one? Settings you need to use are on page 2 of this thread.

    Try those out, and if you have issues please post what you try exactly and I will advise back. And if you just copy the template from above and post it back adding in your changes you wont be anywhere near 10000 char limit

  5. #35
    Join Date
    Nov 2008
    Posts
    26

    Default Re: several problems with a new EP43-DS3

    the values I posted in the previous 3 threads, are the default values of the board as I got it the day I bought it. I didn't try your values yet. I would try them today.
    And just by coping and pasting the table you gave me, I reached 10000 chars.

  6. #36
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: several problems with a new EP43-DS3

    Hmm, That is odd! I can paste 5 of those tables and never hit any limit. See >>>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8] 
    Fine Clock Ratio ____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450] 
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    
    Performance Enhance = [Standard]
    
    CAS Latency Time________________ ?
    Dram RAS# to CAS# Delay_________ ?
    Dram RAS# Precharge Delay_______?
    Precharge Delay (tRAS)__________ ?
    
    ACT to ACT Delay (tRRD)_________ ?
    Rank Write to READ Delay________ ?
    Write to Precharge Delay_________ ?
    Refresh to ACT Delay______________ ?
    Read to Precharge Delay__________ ?
    Static tRead Value_______________
    Static tRead Phase Adjust________ [Auto]
    
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] 
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.1V] 
    CPU Voltage Control_______ [1.25]
    
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB
    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8] 
    Fine Clock Ratio ____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450] 
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    
    Performance Enhance = [Standard]
    
    CAS Latency Time________________ ?
    Dram RAS# to CAS# Delay_________ ?
    Dram RAS# Precharge Delay_______?
    Precharge Delay (tRAS)__________ ?
    
    ACT to ACT Delay (tRRD)_________ ?
    Rank Write to READ Delay________ ?
    Write to Precharge Delay_________ ?
    Refresh to ACT Delay______________ ?
    Read to Precharge Delay__________ ?
    Static tRead Value_______________
    Static tRead Phase Adjust________ [Auto]
    
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] 
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.1V] 
    CPU Voltage Control_______ [1.25]
    
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB
    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8] 
    Fine Clock Ratio ____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450] 
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    
    Performance Enhance = [Standard]
    
    CAS Latency Time________________ ?
    Dram RAS# to CAS# Delay_________ ?
    Dram RAS# Precharge Delay_______?
    Precharge Delay (tRAS)__________ ?
    
    ACT to ACT Delay (tRRD)_________ ?
    Rank Write to READ Delay________ ?
    Write to Precharge Delay_________ ?
    Refresh to ACT Delay______________ ?
    Read to Precharge Delay__________ ?
    Static tRead Value_______________
    Static tRead Phase Adjust________ [Auto]
    
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] 
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.1V] 
    CPU Voltage Control_______ [1.25]
    
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB
    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8] 
    Fine Clock Ratio ____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450] 
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    
    Performance Enhance = [Standard]
    
    CAS Latency Time________________ ?
    Dram RAS# to CAS# Delay_________ ?
    Dram RAS# Precharge Delay_______?
    Precharge Delay (tRAS)__________ ?
    
    ACT to ACT Delay (tRRD)_________ ?
    Rank Write to READ Delay________ ?
    Write to Precharge Delay_________ ?
    Refresh to ACT Delay______________ ?
    Read to Precharge Delay__________ ?
    Static tRead Value_______________
    Static tRead Phase Adjust________ [Auto]
    
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] 
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.1V] 
    CPU Voltage Control_______ [1.25]
    
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB
    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8] 
    Fine Clock Ratio ____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450] 
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    
    Performance Enhance = [Standard]
    
    CAS Latency Time________________ ?
    Dram RAS# to CAS# Delay_________ ?
    Dram RAS# Precharge Delay_______?
    Precharge Delay (tRAS)__________ ?
    
    ACT to ACT Delay (tRRD)_________ ?
    Rank Write to READ Delay________ ?
    Write to Precharge Delay_________ ?
    Refresh to ACT Delay______________ ?
    Read to Precharge Delay__________ ?
    Static tRead Value_______________
    Static tRead Phase Adjust________ [Auto]
    
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] 
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.1V] 
    CPU Voltage Control_______ [1.25]
    
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB

  7. #37
    Join Date
    Nov 2008
    Posts
    26

    Default Re: several problems with a new EP43-DS3

    I don't know, i just got a message saying I acceeded the 10000 characters limit.
    I mentioned a few titles you asked me to change, that does not appear in my BIOS menu. Does the values you gave are still relevant?
    I'm currently still working with a single RAM stick of 2GB, and I do want to add the second one (ofcourse...).
    are the old values you gave me relevant?

  8. #38
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: several problems with a new EP43-DS3

    Ya settings I gave on page 2 are good. Those few settings you do not have are board/cpu specific just ignore them

  9. #39
    Join Date
    Nov 2008
    Posts
    26

    Default Re: several problems with a new EP43-DS3

    Okay. I've updated all the values.
    I rebooted the computer several times since, and it wasn't stuck.
    seems to be working well, but...
    I noticed that my CPU and case are now warmer. before the update, my CPU was (while using some office application) around 27 celsius, and now it rised to around 32 celius.
    case rised from 39 to 43.
    is that acceptable after the changes i made ?

  10. #40
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: several problems with a new EP43-DS3

    Sounds good. Yes those are very fine temps for sure.

    Looks all good, have you tested it much yet?

Page 4 of 5 FirstFirst ... 2345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •