Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: Q9550+ ga-ep45-ds5 + team xtreem 1066mhz




  1. #1
    Join Date
    Nov 2008
    Posts
    21

    Default Q9550+ ga-ep45-ds5 + team xtreem 1066mhz

    So far i have as follows, mind you this stable 24/7. I can push to 4Mhz but Prime causes system to reboot any ideas? . Also thought this would be better on a new thread just in case someone has the same setup.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 8
    Fine CPU Clock Ratio.....................:.. .5
    CPU Frequency ...........................: 3.86 (450x8.5) changed


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 455Mhz changed
    PCI Express Frequency (Mhz) .........:Set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800Mv<<<
    PCI Express Clock Drive.................: 900Mv<<<
    CPU Clock Skew (ps)....................: 50ps<<<
    MCH Clock Skew (ps)...................: 150ps<<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 400
    System Memory Multiplier ..............: 2.00 changed
    Memory Frequency (Mhz) ..............: 800 910
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................12

    Advanced Timing Control
    tRRD...........................................3
    tWTR..........................................3
    tWR............................................4
    tRFC...........................................51
    tRTP...........................................2
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................1066

    Channel A
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:1.36
    CPU Termination…..... 1.200V*.......: <<< 1.35
    CPU PLL…………………....1.500V*.......: <<< 1.500
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly

    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly

    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.26
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 2.1
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual


    Last edited by Dusty; 11-11-2008 at 04:23 AM.
    Intel Q9550 @ 3.867 GA-EP45-DS5
    TEAM XTREEM DARK DDR2 1066MHZ
    XIGMATECH 1283 COOLER
    XIGMATECH 1000W PSU CASE P180
    XTREAM GAMER SOUND BLASTER

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Q9550+ ga-ep45-ds5 + team xtreem 1066mhz

    You asking for help? Or just posting your settings?

    If you are just posting for others thanks! If you would like some help let me know

  3. #3
    Join Date
    Nov 2008
    Posts
    21

    Default Re: Q9550+ ga-ep45-ds5 + team xtreem 1066mhz

    a bit of both, LSD if you can see anything that you would do diff please post up. For instance this is on auto ram settings apart from Driving strengh set to 1066.

    cheers
    Intel Q9550 @ 3.867 GA-EP45-DS5
    TEAM XTREEM DARK DDR2 1066MHZ
    XIGMATECH 1283 COOLER
    XIGMATECH 1000W PSU CASE P180
    XTREAM GAMER SOUND BLASTER

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Q9550+ ga-ep45-ds5 + team xtreem 1066mhz

    Ya, Auto is why I asked. Wasn't sure if you wanted to use Auto or just was not sure what to do.

    Here is setting ranges I would advise for you

    (G)MCH Frequency Latch...............: 333 Or 400 (Or Auto and choose multi with B/333 or D/400)

    System Memory Multiplier ..............: 2.40 (For 333 Latch ram will be 1092)
    (Or 400 Latch use 2.00 for 890 Ram speed, then you can use Much tighter timings and likely 544-12 main timings)

    Memory Frequency (Mhz) ..............: 1092
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15/18

    Advanced Timing Control
    tRRD...........................................3-5
    tWTR..........................................3-6
    tWR............................................4-6
    tRFC...........................................48-50 (52-62)
    tRTP...........................................2/3-5
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................1066-1200 Latter may be better

    Channel A & B
    Static tRead Value.........................:7-10 333 MCH (8/9-12 400 MCH)

  5. #5
    Join Date
    Nov 2008
    Posts
    21

    Default Re: Q9550+ ga-ep45-ds5 + team xtreem 1066mhz

    Ok for 24/7 machine im very happy with this overclock. I have tightened the timings as you mentioned and all is good, here is a screen shot.
    Once again thank you for assistance! :)

    Intel Q9550 @ 3.867 GA-EP45-DS5
    TEAM XTREEM DARK DDR2 1066MHZ
    XIGMATECH 1283 COOLER
    XIGMATECH 1000W PSU CASE P180
    XTREAM GAMER SOUND BLASTER

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Q9550+ ga-ep45-ds5 + team xtreem 1066mhz

    You should set Static Tread manually you will get much better performance, I see in your memset image it is still in Auto. That or you have something in auto still, I cant remember what all makes it show up missing in memset but I know it is Auto on something

  7. #7
    Join Date
    Nov 2008
    Posts
    21

    Default Re: Q9550+ ga-ep45-ds5 + team xtreem 1066mhz

    Hey LSD in the Bios nothing is on auto anymore. I set the Static Tread value down to 9 and all is good might try 8. I edited the first post with my exact settings take a look.
    Intel Q9550 @ 3.867 GA-EP45-DS5
    TEAM XTREEM DARK DDR2 1066MHZ
    XIGMATECH 1283 COOLER
    XIGMATECH 1000W PSU CASE P180
    XTREAM GAMER SOUND BLASTER

  8. #8
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Q9550+ ga-ep45-ds5 + team xtreem 1066mhz

    Looks good!

    Now you can try to lower Vtt and Vcore. Vtt for sure should not need to be that high.

    Just giving ya some tips to try out. Is that 2x2GB ram?

  9. #9
    Join Date
    Nov 2008
    Posts
    21

    Default Re: Q9550+ ga-ep45-ds5 + team xtreem 1066mhz

    yes it is LSD. the ram has to run full on 2.3volts. I will try dropping the Vcore i dont think it needs to be at 1.365.
    Intel Q9550 @ 3.867 GA-EP45-DS5
    TEAM XTREEM DARK DDR2 1066MHZ
    XIGMATECH 1283 COOLER
    XIGMATECH 1000W PSU CASE P180
    XTREAM GAMER SOUND BLASTER

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Q9550+ ga-ep45-ds5 + team xtreem 1066mhz

    Good luck with your vcore testing, ya I dont think it would need all that much actual either

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •