Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 7 of 7

Thread: Overclocking an E6300 on a GA EP35C-DS3R




  1. #1
    Join Date
    Nov 2008
    Posts
    4

    Default Overclocking an E6300 on a GA EP35C-DS3R

    Hi Guys

    Newbie to overclocking here and, try as I might, I cannot get my E6300 to get over 2.8ghz on my Gigabyte EP35C-DS3R MOBO.

    I'm running it at:
    FSB: 400
    PCI-E: 100
    Mem: 2.5
    Mem V: +.4
    MCH V: +.2
    CPU V: 1.4
    Mem timing: 5-5-5-15

    Can anybody with the same setup tell me if they have achieved greater speeds than 2.8ghz and, if so, with what settings?

    Many thanks

    Martin

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Overclocking an E6300 on a GA EP35C-DS3R

    Please post a link to your ram, and how much of it you are using and fill out the below template and I will advise you >>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8] 
    Fine Clock Ratio ____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450] 
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    
    Performance Enhance = [Standard]
    
    CAS Latency Time________________ ?
    Dram RAS# to CAS# Delay_________ ?
    Dram RAS# Precharge Delay_______?
    Precharge Delay (tRAS)__________ ?
    
    ACT to ACT Delay (tRRD)_________ ?
    Rank Write to READ Delay________ ?
    Write to Precharge Delay_________ ?
    Refresh to ACT Delay______________ ?
    Read to Precharge Delay__________ ?
    Static tRead Value_______________
    Static tRead Phase Adjust________ [Auto]
    
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] 
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.1V] 
    CPU Voltage Control_______ [1.25]
    
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB

  3. #3
    Join Date
    Nov 2008
    Posts
    4

    Default Re: Overclocking an E6300 on a GA EP35C-DS3R

    Many thanks for such a swift reply. I'm at work at present but will fill in the template as soon as I get home this evening.

    Martin

  4. #4
    Join Date
    Nov 2008
    Posts
    4

    Default Re: Overclocking an E6300 on a GA EP35C-DS3R

    My memory is: http://www.ocztechnology.com/product...pc_4gb_edition and I have 4gb.

    Here's my BIOS setting as requested. Hope you can help.

    At the settings below I can get a stable 2.8ghz but would like to get up over 3.0 if possible.

    Many thanks.

    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [7]
    Fine Clock Ratio ____________Not in my BIOS
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [400]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.50]
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 15

    ACT to ACT Delay (tRRD)_________auto
    Rank Write to READ Delay________ auto
    Write to Precharge Delay_________ auto
    Refresh to ACT Delay______________ auto
    Read to Precharge Delay__________ auto
    Static tRead Value_______________ auto
    Static tRead Phase Adjust________ auto

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.400V]
    PCI-E OverVoltage Control_ [normal]
    FSB OverVoltage Control___ [normal]
    (G)MCH OverVoltage Control [+0.2V]
    CPU Voltage Control_______ [1.40]

    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support...................: Not in my BIOS
    x C4/C4E State Support..................: Not in my BIOS
    CPU Thermal Monitor 2(TM2) ...........: [disabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [enabled]

    Integrated Peripherals
    Legacy USB Storage Detect___________________[enabled]</pre>
    Last edited by Mart61; 11-13-2008 at 12:59 AM.

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Overclocking an E6300 on a GA EP35C-DS3R

    Here try this, and of course you may need more CPU voltage. What Drop do you see at 1.4 set in the BIOS to what you get in windows? >>>>

    Robust Graphics Booster___________ [Auto or Fast]
    CPU Clock Ratio ____________ [7]
    Fine Clock Ratio ____________Not in my BIOS
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [425]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.40B or D] =1020
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 15/18

    ACT to ACT Delay (tRRD)_________3-4
    Rank Write to READ Delay________ 3-6
    Write to Precharge Delay_________ 4-6
    Refresh to ACT Delay______________ 52-62
    Read to Precharge Delay__________ 3-6
    Static tRead Value_______________ 7-10
    Static tRead Phase Adjust________ auto << Always Auto

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.400V] << Try 2.1 but you may need the full 2.2 to run full speed, not sure as I have not used these. But 2.2 is only the warrantied amount not what is always needed

    PCI-E OverVoltage Control_ [normal]
    FSB OverVoltage Control___ [normal] +.1 for stability
    (G)MCH OverVoltage Control [+0.2V] << May need .25-.3
    CPU Voltage Control_______ [1.40] More

  6. #6
    Join Date
    Nov 2008
    Posts
    4

    Default Re: Overclocking an E6300 on a GA EP35C-DS3R

    Hi and sorry for the delay in replying.

    Thanks for the settings but, alas, they appear not to be working. Perhaps the 2.8 clock is as far as this chip will go for me.

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Overclocking an E6300 on a GA EP35C-DS3R

    Could be what is your load temps at 2.8 and what voltage do you use for it, and what did you try to use for 3Ghz? May just need a bit more

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •