Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: GA-P35C-DS3R Reboot Problem




  1. #11
    Join Date
    Nov 2008
    Posts
    7

    Default Re: GA-P35C-DS3R Reboot Problem

    Hi Lsdmeasap, apologies I did mean to link to 2x2gb memory not 2x1GB. Thanks

  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35C-DS3R Reboot Problem

    No link? Just wanted to check warrantied voltages.

    Here would be 2x2 setting for your board >>>

    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [9]
    Fine Clock Ratio ____________[0]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [333]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.40]
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 18

    ACT to ACT Delay (tRRD)_________ 3-4
    Rank Write to READ Delay________ 3-6
    Write to Precharge Delay_________ 4-6
    Refresh to ACT Delay______________ 52-62
    Read to Precharge Delay__________ 3-6
    Static tRead Value_______________ 7-10
    Static tRead Phase Adjust________ [Auto]


    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [Normal] +0.1 = 1.9V
    PCI-E OverVoltage Control_ [Normal]
    FSB OverVoltage Control___ [Normal]
    (G)MCH OverVoltage Control [+0.2V] +0.2-0.3
    CPU Voltage Control_______ [Normal]

    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

    Legacy USB Storage Detect___________________[Disabled]

  3. #13
    Join Date
    Nov 2008
    Posts
    7

    Default Re: GA-P35C-DS3R Reboot Problem

    Hi again Lsdmeasap, thats the problem with the links, I cant find the 2x2Gb on the A-Data website, there is a link for for the 667Mhz memory but not the 800Mhz. But it is definetley 800Mhz memory as i have the packaging and can find the memory for sale on a few websites, I cant find it on A-data though, sorry about that.

    *EDIT* I have found the 2gb modules listed under 'order info' so I guess they are 1.8V +/-0.1v as well

    Anyway it appears my system is not rebooting as much (if at all). I have put in the new settings and all apears to be good so far but I will test for a few more days. As I said before it mainly happens when the machine has been off for a while. If it is rebooting but not as frequently (I had this before) does this mean I need to fine tune the settings?

    And secondly this is the other memory set I mentioned earlier (which have tighter timings than the A-data), http://www.patriotmemory.com/product...&id=662&type=1 what voltages do I need to set for using 4x1Gb?

    Many thanks for your help, I appreciate it
    Last edited by m1k3; 11-17-2008 at 07:08 PM.

  4. #14
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35C-DS3R Reboot Problem

    Ahh, so you did not buy it online? What is the Model # on the sticker, maybe I can find it

    Ya, sounds like you almost have it since it is not doing it as much. If you need help finding which your issue may be post me what you are using exactly and how often you get a BSOD and I will try to help. BSOD can also be a driver issue, you need to get the BSOD code/error #. To do that since the screen goes by so fast you have to change a setting. This setting is in system properties, advanced tab, then startup and recovery. Inside this window you will see "System Failure" at the bottom, inside it uncheck "Automatically restart" then when you next BSOD your system will stay on the BSOD Screen until you reboot. This way you can get the error code or message

    For 4x1 of that ram I would suggest similar settings, with a few changes >>>>

    CAS Latency Time________________ 4
    Dram RAS# to CAS# Delay_________4
    Dram RAS# Precharge Delay_______4
    Precharge Delay (tRAS)__________ 12

    ACT to ACT Delay (tRRD)_________ 3-4
    Rank Write to READ Delay________ 3-6
    Write to Precharge Delay_________ 4-6
    Refresh to ACT Delay______________ 52-65
    Read to Precharge Delay__________ 3-6
    Static tRead Value_______________ 7-10
    Static tRead Phase Adjust________ [Auto]


    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [Normal] +0.3-+0.4 (2.2 is warranted, but may not be needed, try +.3 for 2.1 first)

    PCI-E OverVoltage Control_ [Normal]
    FSB OverVoltage Control___ [+0.1] << For stability
    (G)MCH OverVoltage Control [+0.2V] +0.2-0.3

  5. #15
    Join Date
    Nov 2008
    Posts
    7

    Default Re: GA-P35C-DS3R Reboot Problem

    Hi again, thanks for your replies my board seems to be much more stable now, I have only had one reboot now. Im not sure if you understand my problem completely as it is not rebooting whilst in windows. The boot doesn't get that far, the reboot cycle is as though I have overclocked my board and the board doesn't accept the settings. So it switches off, trys to reboot, switches off, trys to reboot etc, normally I have to pull the plug or turn the PSU switch off. There is no BSOD as I don't even get to the S.M.A.R.T diagnostic screen. When the machine does boot into windows its rock solid and doesn't hang or reset.

    Thanks for the other settings as well for the 4x1Gb sticks, although I can't set the memory to +0.4v (for 2.2v) as the bios only goes up to +0.3. Thanks for your help again.

    Yes you are correct about the A-data sticks I brought them from a local computer shop not the intrenet. The info on the sticker is AD2800002GQ0U DDR2 800(5) 2GX16 ADQVE1B16 M20AD6H3J4171Q1E52
    Last edited by m1k3; 11-18-2008 at 10:16 PM.

  6. #16
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35C-DS3R Reboot Problem

    Ahh yeah, I thought you did mean a BSOD as well. A double reboot is normall, triple and more just means incorrect settings and defaults will be loaded and used once the board does start again.

    What? You can't set more then +.3 ram voltage? I think all of them will go WAY past that, are you sure? What does the +.3 give you in PC Health section?

    Can you post me a image of CPU-z SPD Memory tab, Just want to be sure as I could not find any info with those #'s above. Maybe CPU-z will show serial or model # in the SPD Tab. I am sure you would be fine with 2.1V anyway until you try to overclock the ram

  7. #17
    Join Date
    Nov 2008
    Posts
    7

    Default Re: GA-P35C-DS3R Reboot Problem

    Ahh ok, double reboot sometimes, used to have three reboots occasionally but since I've had the new memory settings it seems to be ok.

    I had F10 bios flashed so I reflashed F11 and now I can go up to +0.7v. F10 only gives me +0.3v MAX!!!

    I've got some settings from CPU-Z there is no serial number but it says:-
    SLOT 1 AND 3

    DDR2
    2048Mbytes
    PC2-6400 (400 Mhz)
    A-Data Technology
    Part Number = DQVE1B16
    Serial Number = Greyed Out

    Then it says
    400Mhz
    5.0
    5
    5
    18
    Command Rate Greyed Out
    1.8V

    Thanks

  8. #18
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35C-DS3R Reboot Problem

    I need to see a picture of that, and please do check what PC health section of your BIOS says when you set +.4 and reboot. You should likely not be using 2.2 anyway though as 1.8-1.9 may be best if they are indeed 1.8V only sticks

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •