Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: Gigabyte EP45 - DS3 and Mushkin pc8000




  1. #1
    Join Date
    Nov 2008
    Posts
    4

    Default Gigabyte EP45 - DS3 and Mushkin pc8000

    Hello,

    I have the folowing configuration on my pc :

    CPU - Intel q8200
    MB : Gigabyte EP45 - DS3 (bios ver F9 )
    Mem: 2x2GB Mushkin PC8000- 1000mhz ( red )
    PSU : CoolerMaster Real power 620W
    Video : MSI RADEON 4850
    Case : Antec 300


    I need some help with the bios settings to make the memory work at 1000 or 1066 mhz stable . Now they are running at 800mhz

    Thank you

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte EP45 - DS3 and Mushkin pc8000

    Redlines eh! Here try this >>>>



    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 7
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 2.33
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 
    PCI Express Clock Drive.................: <<< 
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 50-150
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 3.20B
    Memory Frequency (Mhz) ..............: 1065
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................12/15
    
    Advanced Timing Control
    tRRD...........................................3-4
    tWTR...........................................3-6
    tWR............................................4-6
    tRFC...........................................52-62
    tRTP...........................................3-5
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................1066
    
    Channel A
    Static tRead Value.........................:7-10
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:7-10
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: Auto for stock
    CPU Termination…..... 1.200V*.......: <<< Please set to stock if you are not overclocking, if you are 1.2-1.38
    
    CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.24-1.28
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< 1.55-1.6
    ICH Core…………...……1.100V............: <<< 1.1-1.14
    
    DRAM
    DRAM Voltage ……....1.800V............: 2.0-2.1
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  3. #3
    Join Date
    Nov 2008
    Posts
    4

    Default Re: Gigabyte EP45 - DS3 and Mushkin pc8000

    Thank you for the settings.
    The only problem I have is that i can't use 3.20B setting - At 1066 mhz. My vista don't start- it is restarting
    I manage to run them at 1000mhz stable using another multiply so it is ok.
    Last edited by ajax26; 11-20-2008 at 04:47 PM.

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte EP45 - DS3 and Mushkin pc8000

    They will do 1066 for sure, if you want let me know and I will help you get it working.

    If you do want to try, post me exactly what you are using now and I will advise for 1066

  5. #5
    Join Date
    Nov 2008
    Posts
    4

    Default Re: Gigabyte EP45 - DS3 and Mushkin pc8000

    Hello again ...
    I am back home for holidays and i have time to play with my pc.
    Now I am running my q8200 at 2800mhz with fsb 400 and same settings you suggested me and the system is stable and works great.
    I changed only the System Memory Multiplier to keep the magic number 1000 at memory frequency , CPU Vcore to 1,2 v and CPU Termination at 1.200V
    I am planning to get tomorow another pair of same mushkin 2x2 gb to raise my ram at 8gb and I want to know if i must do some changes in order to keep the system working fine

    Thx

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •