Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: New setup, new to OC, starting point?

  1. #1
    Join Date
    Nov 2008

    Question New setup, new to OC, starting point?

    So I recently purchased a new setup I'm pretty happy with. I'd like to start learning about over clocking, specifically I was wondering if anyone can post some suggested settings of where to start.

    Here's my system:
    Mobo: Gigabyte GA-EP45-UD3P
    CPU: Intel Core 2 Quad Q9550
    RAM: 8GB G.SKILL DDR2 1000 (5-5-5-15@2.1v, 4x2GB)
    Video: EVGA NVIDIA GeForce GTX260 896MB 448-bit GDDR3 PCIe 2.0 x16
    HDD: 3 x Seagate Barracuda ES 250GB (RAID 0)
    PSU: Corsair 620HX
    HSF: Zalman 9500A
    OS: Windows XP Pro x64
    Any insight or advice would be greatly appreciated.
    Last edited by BoaZ2020; 11-15-2008 at 10:59 AM.

  2. #2

    Default Re: New setup, new to OC, starting point?

    that is my set up ... but read in here there are quite few with your setting ... and everychip and board are different .. mine the Vcore little high ... most peoples seem to do under 1.35 vcore

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    PCB Island

    Default Re: New setup, new to OC, starting point?

    Did you get all stable at stock yet? If not for sure do that first and save that as a BIOS Profile (F11 is save on the MAIN Page and F12 is load)

    Then please post what speed you would like to run at and I will try to make you some suggestions

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts