Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 23

Thread: Gigabyte UD3P + Intel E7200 + DDR2 800




  1. #11
    Join Date
    Nov 2008
    Posts
    15

    Default Re: Gigabyte UD3P + Intel E7200 + DDR2 800

    Well, the first one that arrived had bent fins. And so it was sent back immediately. So yea...that is why. It now says out for delivery. But it isnt getting here fast enough. I want to start overclocking :)
    Current}-{Core 2 E7200 @ 2.5GHz}-{Gigabyte UD3P}-{4-GIG G-Skill}-{EVGA 9800GTX}
    Upgrades}-{Intel Q9550}-{Gigabyte UD3P}-{8-GIG G-Skill}-{EVGA GTX280 55nm}
    Future }-{Core i7 920}-{Gigabyte UD5}-{6-GIG G-Skill DDR3}-{EVGA GTX280 55nm}

  2. #12
    Join Date
    Nov 2008
    Posts
    15

    Default Re: Gigabyte UD3P + Intel E7200 + DDR2 800

    Well, I am ready to start overclocking. The Hyper 212 showed up today, and it is installed and ready to go.

    I have a push/pull fan set up two 120mm fans @ 70cfm each.

    I am ready to start overclocking :)
    Current}-{Core 2 E7200 @ 2.5GHz}-{Gigabyte UD3P}-{4-GIG G-Skill}-{EVGA 9800GTX}
    Upgrades}-{Intel Q9550}-{Gigabyte UD3P}-{8-GIG G-Skill}-{EVGA GTX280 55nm}
    Future }-{Core i7 920}-{Gigabyte UD5}-{6-GIG G-Skill DDR3}-{EVGA GTX280 55nm}

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte UD3P + Intel E7200 + DDR2 800

    So... You get anywhere yet? If so, or not use the template on page one and give me what you are using and tell me what you would like to try and I will give you some suggestions

  4. #14
    Join Date
    Nov 2008
    Posts
    15

    Default Re: Gigabyte UD3P + Intel E7200 + DDR2 800

    Ok I will do that. I had to run out last night so I didnt get to try much. I will list all my settings here shortly.

    My E7200 right now is stock at 2.53....But I would like to start with at least pushing to 3.6 and going from there. I know this should be attainable since I was able to get 3.1 with the stock cooler.

    I will use your template to list out my settings. Ill get back with you really soon.

    Thanks for all the advise so far :)
    Last edited by JPB; 12-05-2008 at 08:05 PM.
    Current}-{Core 2 E7200 @ 2.5GHz}-{Gigabyte UD3P}-{4-GIG G-Skill}-{EVGA 9800GTX}
    Upgrades}-{Intel Q9550}-{Gigabyte UD3P}-{8-GIG G-Skill}-{EVGA GTX280 55nm}
    Future }-{Core i7 920}-{Gigabyte UD5}-{6-GIG G-Skill DDR3}-{EVGA GTX280 55nm}

  5. #15
    Join Date
    Nov 2008
    Posts
    15

    Default Re: Gigabyte UD3P + Intel E7200 + DDR2 800

    I am labeling all my current settings now based on your template.
    Current}-{Core 2 E7200 @ 2.5GHz}-{Gigabyte UD3P}-{4-GIG G-Skill}-{EVGA 9800GTX}
    Upgrades}-{Intel Q9550}-{Gigabyte UD3P}-{8-GIG G-Skill}-{EVGA GTX280 55nm}
    Future }-{Core i7 920}-{Gigabyte UD5}-{6-GIG G-Skill DDR3}-{EVGA GTX280 55nm}

  6. #16
    Join Date
    Nov 2008
    Posts
    15

    Default Re: Gigabyte UD3P + Intel E7200 + DDR2 800

    Here are some of my settings. I only copied the most important ones I think. If you need any others let me know and ill get them here asap.

    MY SETTINGS ARE IN BOLD LETTERS




    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: AUTO
    CPU Clock Ratio ..........................: 9X
    Fine CPU Clock Ratio.....................: +0.5
    CPU Frequency ...........................: 2.53 (266x9.5)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [DISABLED]
    CPU Host Frequency (Mhz) ............: 266 Mhz
    PCI Express Frequency (Mhz) .........: AUTO

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<<
    PCI Express Clock Drive.................: <<<
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [TURBO]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: SPD (AUTO)
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: SPD (AUTO)

    Standard Timing Control
    CAS Latency Time........................ 5 AUTO
    tRCD ......................................... 5 AUTO
    tRP'........................................... 5 AUTO
    tRAS.......................................... 15 AUTO

    Advanced Timing Control
    tRRD........................................... 3 AUTO
    tWTR.......................................... 3 AUTO
    tWR............................................ 6 AUTO
    tRFC........................................... 52 AUTO
    tRTP........................................... 3 AUTO
    Command Rate (CMD) ....................: 0 AUTO

    Driving Strength Profiles
    Driving Strength ............................

    Channel A
    Static tRead Value.........................: 5 AUTO
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................: 5 AUTO
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.10000V AUTO
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much

    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly

    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.100V AUTO
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 1.800V AUTO
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enable
    Current}-{Core 2 E7200 @ 2.5GHz}-{Gigabyte UD3P}-{4-GIG G-Skill}-{EVGA 9800GTX}
    Upgrades}-{Intel Q9550}-{Gigabyte UD3P}-{8-GIG G-Skill}-{EVGA GTX280 55nm}
    Future }-{Core i7 920}-{Gigabyte UD5}-{6-GIG G-Skill DDR3}-{EVGA GTX280 55nm}

  7. #17
    Join Date
    Nov 2008
    Posts
    15

    Default Re: Gigabyte UD3P + Intel E7200 + DDR2 800

    Above are all my settings. Those are the most important ones I think. :)
    Current}-{Core 2 E7200 @ 2.5GHz}-{Gigabyte UD3P}-{4-GIG G-Skill}-{EVGA 9800GTX}
    Upgrades}-{Intel Q9550}-{Gigabyte UD3P}-{8-GIG G-Skill}-{EVGA GTX280 55nm}
    Future }-{Core i7 920}-{Gigabyte UD5}-{6-GIG G-Skill DDR3}-{EVGA GTX280 55nm}

  8. #18
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte UD3P + Intel E7200 + DDR2 800

    Try this for 3.6 then >>>

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: AUTO or fast
    CPU Clock Ratio ..........................: 9X
    Fine CPU Clock Ratio.....................: +0.5
    CPU Frequency ...........................: 3.562 (375x9.5)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [enabled]
    CPU Host Frequency (Mhz) ............: 375 Mhz
    PCI Express Frequency (Mhz) .........: 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<< 50-150


    DRAM Performance Control
    Performance Enhance...................: [Standard]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.40B
    Memory Frequency (Mhz) ..............: 900
    DRAM Timing Selectable ................: Manual

    Standard Timing Control
    CAS Latency Time........................ 5
    tRCD ......................................... 5
    tRP'........................................... 5
    tRAS.......................................... 15/18

    Advanced Timing Control
    tRRD........................................... 3-4
    tWTR.......................................... 3-6
    tWR............................................4-6
    tRFC........................................... 52-62
    tRTP........................................... 3-5
    Command Rate (CMD) ....................: 2

    Driving Strength Profiles
    Driving Strength ............................800/1066

    Channel A
    Static tRead Value.........................: 6/7-10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................: 6/7-10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.3+ You will have to find your own voltage here all CPU's are different. Do not use auto, set high enough to for sure boot and then you can lower later. What you set will be less in windows check with CPU-z how much and keep that in mind. You may need 1.25-1.34 actual to get 3.6 or more. All up to your chip

    CPU Termination…..... 1.200V*.......: <<< 1.24-1.36 (1.24-1.3 likely be good for 3.6)
    CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much

    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly

    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.2-1.3 (1.24-1.28 will be good likely)
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< 1.55-1.6
    ICH Core…………...……1.100V............: <<< 1.1x-1.2

    DRAM
    DRAM Voltage ……....1.800V............: 1.9-2.0

  9. #19
    Join Date
    Nov 2008
    Posts
    15

    Default Re: Gigabyte UD3P + Intel E7200 + DDR2 800

    Thanks. I am going to reboot now and run the settings you advised. I will let you know how it goes shortly.

    If it does end up booting into Windows fine, what program should I use to ensure stability ?
    Current}-{Core 2 E7200 @ 2.5GHz}-{Gigabyte UD3P}-{4-GIG G-Skill}-{EVGA 9800GTX}
    Upgrades}-{Intel Q9550}-{Gigabyte UD3P}-{8-GIG G-Skill}-{EVGA GTX280 55nm}
    Future }-{Core i7 920}-{Gigabyte UD5}-{6-GIG G-Skill DDR3}-{EVGA GTX280 55nm}

  10. #20
    Join Date
    Nov 2008
    Posts
    15

    Default Re: Gigabyte UD3P + Intel E7200 + DDR2 800

    Ok, I changed all my settings to the ones above, and the PC rebooted and got stuck in a reboot mode.

    My cpu vcore, I set it at 1.24v and all the other settings were exactly what you told me.

    Do you think I need more vcore ?

    Just to clarify....at stock idle my cpu temps are 21c with the Cooler Master Hyper 212
    Last edited by JPB; 12-07-2008 at 12:25 AM.
    Current}-{Core 2 E7200 @ 2.5GHz}-{Gigabyte UD3P}-{4-GIG G-Skill}-{EVGA 9800GTX}
    Upgrades}-{Intel Q9550}-{Gigabyte UD3P}-{8-GIG G-Skill}-{EVGA GTX280 55nm}
    Future }-{Core i7 920}-{Gigabyte UD5}-{6-GIG G-Skill DDR3}-{EVGA GTX280 55nm}

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •