Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: Gigabyte UD3P + Intel E7200 + DDR2 800




  1. #1
    Join Date
    Nov 2008
    Posts
    15

    Default Gigabyte UD3P / SETTINGS POSTED

    Ok, I am new to the forums, I am also on Anandtech forums. But I found this forum through a Anand member and I am glad I did.

    I am glad to be here.

    Hi all, I have a few questions pertaining to my motherboard.

    So far, I am only running the stock cooler. I have been able to overclock the CPU up to 3.0 completely stable. What I used for this was Easy Tune 6. I know the BIOS is better for OC'ing but not to familiar with the options since I have always used ASUS boards.

    My rig is as follows:

    Gigabyte UD3P
    4 GIG G-Skill DDR2 800 Newegg.com - G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Desktop Memory
    Intel E7200
    OCZ GameXtreme 850

    What would be the best way about overclocking my CPU to its max ?

    I am currently awaiting on the TRUE Black by Thermalright to arrive

    Any help greatly appreciated
    Last edited by JPB; 12-05-2008 at 10:08 PM. Reason: Edited Title

  2. #2

    Default Re: Gigabyte UD3P + Intel E7200 + DDR2 800

    What would be the best way about overclocking my CPU to its max ? ..
    very very hard to said .. it is up to individual .... let say your chip can go to 4 but you use stock cooler .. then 3 is max .... maybe 3.6 for air ... and want to spend so much more for water .... (all this is not actual .. just sample)
    and then your ram ... is your ram capaple to OC .. some time have to underclock the ram to achieve OC higher ... and then their is case .. if your case is not good air flow .. you won't able to OC much even you have a good air cooler...
    the way i OC ... i look at the max time ... in my case ... 70 .. but i like to be safe so i set mine to 65 degree .... so what ever my oc can go up to around 65 i stop ...

    did you run prime95 ? OCCT ? Orthors ? to make sure your OC so far is stable ?
    good luck and happy OC

  3. #3
    Join Date
    Nov 2008
    Posts
    15

    Default Re: Gigabyte UD3P + Intel E7200 + DDR2 800

    Right now my computer case is a Antec P182 Gun Metal Black.

    And I am waiting on my TRUE Thermalright Black to arrive :)
    Current}-{Core 2 E7200 @ 2.5GHz}-{Gigabyte UD3P}-{4-GIG G-Skill}-{EVGA 9800GTX}
    Upgrades}-{Intel Q9550}-{Gigabyte UD3P}-{8-GIG G-Skill}-{EVGA GTX280 55nm}
    Future }-{Core i7 920}-{Gigabyte UD5}-{6-GIG G-Skill DDR3}-{EVGA GTX280 55nm}

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte UD3P + Intel E7200 + DDR2 800

    I would just keep using 3.0Ghz until you get your true. Then come by and I can help you with all your BIOS settings for sure.

  5. #5
    Join Date
    Nov 2008
    Posts
    15

    Default Re: Gigabyte UD3P + Intel E7200 + DDR2 800

    Thanks.

    Yea I think your right. Shouldnt be long before it arrives, few days max. Looking forward to your help.

    You seem to know ALOT
    Current}-{Core 2 E7200 @ 2.5GHz}-{Gigabyte UD3P}-{4-GIG G-Skill}-{EVGA 9800GTX}
    Upgrades}-{Intel Q9550}-{Gigabyte UD3P}-{8-GIG G-Skill}-{EVGA GTX280 55nm}
    Future }-{Core i7 920}-{Gigabyte UD5}-{6-GIG G-Skill DDR3}-{EVGA GTX280 55nm}

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte UD3P + Intel E7200 + DDR2 800

    Ya, just let us know when you get your new cooler. Here is a template for you to give me the settings you are using right now (So I know where you are starting out at) and then I will post you some 3.6 settings back for you to try when you get the cooler (Or before if you are brave )

    Thanks for the kind words, I try to help as much as I can when I can

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: 
    CPU Clock Ratio ..........................: 
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 
    PCI Express Clock Drive.................: <<< 
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 
    Memory Frequency (Mhz) ..............: 
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................
    
    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................
    
    Channel A
    Static tRead Value.........................:7-10
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:7-10
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  7. #7
    Join Date
    Nov 2008
    Posts
    15

    Default Re: Gigabyte UD3P + Intel E7200 + DDR2 800

    Excellent work on the template :)

    My cooler will be here before Friday..or at least it should be. Going to have fun this weekend seeing what the processor can do.

    Ill let you know once it is installed.
    Current}-{Core 2 E7200 @ 2.5GHz}-{Gigabyte UD3P}-{4-GIG G-Skill}-{EVGA 9800GTX}
    Upgrades}-{Intel Q9550}-{Gigabyte UD3P}-{8-GIG G-Skill}-{EVGA GTX280 55nm}
    Future }-{Core i7 920}-{Gigabyte UD5}-{6-GIG G-Skill DDR3}-{EVGA GTX280 55nm}

  8. #8
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  9. #9
    Join Date
    Nov 2008
    Posts
    15

    Default Re: Gigabyte UD3P + Intel E7200 + DDR2 800

    The heatsink will be here tomorrow. FINALLY

    I ordered the Cooler Master Hyper 212. Going to use two fans....70cfm each for a push pull setup.

    Will post again once it is installed.
    Current}-{Core 2 E7200 @ 2.5GHz}-{Gigabyte UD3P}-{4-GIG G-Skill}-{EVGA 9800GTX}
    Upgrades}-{Intel Q9550}-{Gigabyte UD3P}-{8-GIG G-Skill}-{EVGA GTX280 55nm}
    Future }-{Core i7 920}-{Gigabyte UD5}-{6-GIG G-Skill DDR3}-{EVGA GTX280 55nm}

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •