Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 31

Thread: I'm unable to overclock my CPU with Easytune.




  1. #11
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: I'm unable to overclock my CPU with Easytune.

    Please remove all but one stick of ram and then go into the BIOS. You should then be able to set your MIT Settings again so all of your ram works

    You would need to set all your SATA Settings the same again such as boot order, boot device order and SATA modes and such

  2. #12
    Join Date
    Nov 2008
    Posts
    15

    Default Re: I'm unable to overclock my CPU with Easytune.

    Quote Originally Posted by Lsdmeasap View Post
    Please remove all but one stick of ram and then go into the BIOS. You should then be able to set your MIT Settings again so all of your ram works

    You would need to set all your SATA Settings the same again such as boot order, boot device order and SATA modes and such
    Thanks, I'll try it.


    What RAM settings should I change to get it working again??

    Voltage?
    Timings?

    Something else?

  3. #13
    Join Date
    Nov 2008
    Posts
    15

    Default Re: I'm unable to overclock my CPU with Easytune.

    OK, I've got it working again. And I reinstalled ET5

    THANKS!!!

    What do I need to adjust to get the other RAM stick working??
    Last edited by Krtismo; 11-21-2008 at 06:25 PM.

  4. #14
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: I'm unable to overclock my CPU with Easytune.

    I need a link to your ram, and tell me what config you have (2x1 or 2x2)

    And please fill this out with what you are using now So I can see your CPU settings and advise best settings for your ram >>>>
    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8] 
    Fine Clock Ratio ____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450] 
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    
    Performance Enhance = [Standard]
    
    CAS Latency Time________________ ?
    Dram RAS# to CAS# Delay_________ ?
    Dram RAS# Precharge Delay_______?
    Precharge Delay (tRAS)__________ ?
    
    ACT to ACT Delay (tRRD)_________ ?
    Rank Write to READ Delay________ ?
    Write to Precharge Delay_________ ?
    Refresh to ACT Delay______________ ?
    Read to Precharge Delay__________ ?
    Static tRead Value_______________
    Static tRead Phase Adjust________ [Auto]
    
    CPU/PCIEX Clock Driving Control [800mV]
    CPU Clock Skew Control [normal]
    GMCH Clock Skew Control [Normal]
    
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] 
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.1V] 
    CPU Voltage Control_______ [1.25]
    
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB
    But for now, general info. 4GB needs +.2-.3 MCH voltage, refresh to act delay of 52-62, and you need to set your ram voltage manually. And be sure to put performance enhance on standard. That should get you going with 4GB until I get your ram link and can give you full settings

  5. #15
    Join Date
    Nov 2008
    Posts
    15

    Default Re: I'm unable to overclock my CPU with Easytune.

    Thanks, I'll fill it out when I get home.

  6. #16
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: I'm unable to overclock my CPU with Easytune.

    K, let me know. You should be able to get all your ram working with the above suggestions anyway though

    So good luck, and keep us posted if you need more help

  7. #17
    Join Date
    Nov 2008
    Posts
    15

    Default Re: I'm unable to overclock my CPU with Easytune.

    This is how my bios looks right now. I did raise DDR2 voltage .3V yesterday, and still couldn't get 2nd stick of RAM to work.

    Here is the RAM I have:
    OCZ Technology | Products | Memory | OCZ DDR2 PC2-6400 Reaper CL4 4GB Edition

    Thanks a TON for your help!!!

    I'm going to post some pictures of my BIOS just so you have all of the info.

    Code:
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8] 
    Fine Clock Ratio ____________[0.5]---NA
    CPU Host Clock Control_ [Disabled]
    CPU Host Frequency (MHz)__________ [100] 
    PCI Express Frequency (Mhz)_______ [Auto]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [Auto]
    DRAM Timing Selectable_______ SPD __ [Auto]
    
    Performance Enhance = [Standard]
    
    CAS Latency Time________________ 6
    Dram RAS# to CAS# Delay_________ 6
    Dram RAS# Precharge Delay_______6
    Precharge Delay (tRAS)__________ 18
    
    ACT to ACT Delay (tRRD)_________ 3
    Rank Write to READ Delay________ 3
    Write to Precharge Delay_________ 6
    Refresh to ACT Delay______________ 46
    Read to Precharge Delay__________ 3
    Static tRead Value_______________7
    Static tRead Phase Adjust________ [Auto]
    
    CPU/PCIEX Clock Driving Control [800mV]---NA
    CPU Clock Skew Control [normal]---NA
    GMCH Clock Skew Control [Normal]---NA
    
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] 
    PCI-E OverVoltage Control_ [Normal] 
    FSB OverVoltage Control___ [Normal] 
    (G)MCH OverVoltage Control [Normal] 
    CPU Voltage Control_______ [1.35]
    
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support....................: [Disabled]---NA
    x C4/C4E State Support..................: [Disabled]---NA
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Enabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Enabled] *Note* Must be enabled to flash from USB

  8. #18
    Join Date
    Nov 2008
    Posts
    15

    Default Re: I'm unable to overclock my CPU with Easytune.





  9. #19
    Join Date
    Nov 2008
    Posts
    15

    Default Re: I'm unable to overclock my CPU with Easytune.





  10. #20
    Join Date
    Jun 2008
    Location
    United Kingdom
    Posts
    71

    Default Re: I'm unable to overclock my CPU with Easytune.

    I'm using the OCZ PC8500 Reaper 2x2GB and can run it 54 Refresh to ACT Delay and that has improved my memory scores by quite a lot but I have upped my memory voltage to 2.1V from 2.0 while running 72 Refresh to ACT Delay. I was running it at 72 as OCZ said it might be necessary with 4GB. I'm running it @ Turbo as well for Performance Enhance.

    But I really should do some full testing to make sure it is 100% stable. I am a bit reluctant to spend time doing such tests as I find them very wasteful of time.
    Gigabyte X48-DS5 F7 Bios
    Intel Q9450 2.66GHz 8 x 333, 8 x 438 (3.5GHz when overclocked) 1.35V with Intel Power saving enabled
    Windows XP Pro SP2 32 bit
    2x2GB OCZ Reaper HPC PC2-8500
    Corsair HX 520 PSU
    Gigabyte GV-RX385512H HD3850 512MB
    Western Digital WD5000ABYS 500GB SATA hard drive
    Western Digital WD5000YS 500GB SATA hard drive - disconnected
    Seagate 250GB SATA hard drive
    Samsung 1TB
    Samsung 500GB
    Seagate 80GB
    BenQ 1640 IDE DVD-ReWriter
    NEC 3520 IDE DVD-ReWriter
    Pinnacle Dual DVB-T PCI Tuner
    Mystique Dual PCI-e DVB-S2
    mCubed T Balancer Fan controller controlling 6 case fans and CPU fan - CPU fan recently changed after system freezing started with new higher speed CPU fan.
    minifan blowing through northbridge

Page 2 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •